| Component | SUSPENSION:FRONT:CONTROL ARM:LOWER ARM |
|---|---|
| Manufacturer | CHRYSLER CORPORATION |
| Mfr Report Date | 19800801 |
| NHTSA Campaign ID | 89V052000 |
| Summary | FRONT SUSPENSION CROSSMEMBER MAY CORRODE AND FAIL AT LOWER CONTROL ARM REAR PIVOT MOUNTS IF OPERATED WHERE SALT IS USED TO AID IN SNOW REMOVAL. |
| Consequence | CONTROL ARM COULD DETACH FROM THE CROSSMEMBER, ADVERSELYAFFECTING DIRECTIONAL STABILITY, WHICH COULD RESULT IN AN ACCIDENT. |
| Remedy | INSTALL ATTACHMENT REINFORCEMENT BRACKETS TO PREVENT CONTROL ARM DETACHMENT AS A RESULT OF CORROSION WEAKENING. |
| Notes | SYSTEM: FRONT SUSPENSION CROSSMEMBER.VEHICLE DESCRIPTION: PASSENGER CARS. |
| Component | EQUIPMENT:ELECTRICAL |
|---|---|
| Manufacturer | CHRYSLER CORPORATION |
| Mfr Report Date | 19820801 |
| NHTSA Campaign ID | 82V092000 |
| Summary | THE TRAVEL COMPUTER SYSTEM WIRING, ON THE INVOLVED VEHICLES, MAY BE IMPROPERLY CONNECTED. THIS CONDITION CAN CAUSE DAMAGE TO INTERNAL COMPONENTS. |
| Remedy | THE WIRING WILL BE RECONNECTED TO ENSURE PROPER FUNCTIONING OF IGNITION SYSTEM.. |
| Notes | VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH OPTIONAL TRAVEL COMPUTERSYSTEMS.SYSTEM: ELECTRICAL; TRAVEL COMPUTER SYSTEM, WIRING.CONSEQUENCES OF DEFECT: DAMAGE TO INTERNAL COMPONENTS OF THE SYSTEMS INTERFACEMODULE COULD AFFECT THE ENGINE IGNITION SYSTEM CAUSING LOSS OF IGNITION ALONGWITH THE INABILITY TO RESTART THE ENGINE. THIS PRESENTS A TRAFFIC HAZARD FROMWHICH AN ACCIDENT COULD RESULT. |
| Component | SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS |
|---|---|
| Manufacturer | CHRYSLER CORPORATION |
| Mfr Report Date | 19820801 |
| NHTSA Campaign ID | 82V085000 |
| Summary | ON THE INVOLVED VEHICLES, IMPROPER ROUTING OF THE HYDRAULIC BRAKE TUBE COULD CAUSE IT TO CHAFE AGAINST THE PARK BRAKE CABLES. EVENTUALLY, THE BRAKE TUBE MAY FAIL AND BRAKE FLUID LEAKAGE MAY OCCUR. |
| Remedy | DEALER WILL REROUTE THE HYDRAULIC BRAKE TUBE, IF NECESSARY, WITHOUT CHARGE TO OWNER. |
| Notes | VEHICLE DESCRIPTION; PASSENGER VEHICLES.SYSTEM: PARKING BRAKES; HYDRAULIC BRAKE TUBE, ROUTING.CONSEQUENCES OF DEFECT: PARTIAL LOSS OF BRAKING CAPABILITY, LOSS OF VEHICLECONTROL, AND AN ACCIDENT COULD OCCUR.NOTE: THE INSTRUMENT PANEL BRAKE WARNING LIGHT SHOULD ALERT DRIVER TO THEPROBLEM. |
| Component | SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS |
|---|---|
| Manufacturer | CHRYSLER CORPORATION |
| Mfr Report Date | 19820801 |
| NHTSA Campaign ID | 82V123000 |
| Summary | HYDRAULIC BRAKE TUBING ROUTED TO THE LEFT REAR WHEEL BRAKE SYSTEM MAY HAVE BEEN BENT OUT OF SHAPE DURING ASSEMBLY AND COULD CHAFE AGAINST THE EXHAUST SYSTEM HANGER BOLT. |
| Remedy | DEALER WILL INSPECT AND RELOCATE TUBE, IF NECESSARY. A RETAINING CLIP WILL BE INSTALLED TO ENSURE ADEQUATE CLEARANCE FOR THE TUBING; ANY DAMAGED TUBES WILL ALSO BE REPLACED. |
| Notes | VEHICLE DESCRIPTION: PASSENGER VEHICLES.SYSTEM: SERVICE BRAKES; HYDRAULIC BRAKE TUBING.CONSEQUENCES OF DEFECT: CONTINUED CHAFING WILL EVENTUALLY WEAR A HOLE IN THETUBING AND RESULT IN LOSS OF BRAKE FLUID AND PARTIAL LOSS OF BRAKINGCAPABILITY, WHICH COULD CAUSE AN ACCIDENT.NOTE: THE BRAKE WARNING LIGHT SHOULD ALERT OPERATOR TO THE PARTIAL SYSTEM LOSS. |
Data updated January 2023
1983 Chrysler LeBaron Recall FAQs (show)
Q: Does the 1983 Chrysler LeBaron have any vehicle recalls?
A: Yes, the 1983 Chrysler LeBaron has atleast 4 recalls.Q: What are the 1983 Chrysler LeBaron recalls?
A: The 1983 Chrysler LeBaron recalls include: SUSPENSION:FRONT:CONTROL ARM:LOWER ARM, EQUIPMENT:ELECTRICAL, SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS, SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS.
A: Yes, the 1983 Chrysler LeBaron has atleast 4 recalls.Q: What are the 1983 Chrysler LeBaron recalls?
A: The 1983 Chrysler LeBaron recalls include: SUSPENSION:FRONT:CONTROL ARM:LOWER ARM, EQUIPMENT:ELECTRICAL, SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS, SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS.