conceptcarz.com

1971 Dodge Charger Specifications

These are standard specifications for the 1971 Dodge Charger, not necessarily specifications for the vehicle(s) in the photo(s).
Engine Location : Front
Drive Type : Rear Wheel
Production Years for Series : 1971 - 1974
Price : $2,710-$3,775
Weight : 3220 lbs | 1460.567 kg
Inline 6
Displacement : 3687 cc | 225.0 cu in. | 3.7 L.
Power : 145 BHP (106.72 KW) @ 4000 RPM
Bore : 3.4 in | 86 mm.
Stroke : 4.1 in | 105 mm.
Compression : 8.4:1
Main Bearings : 4
Cylinder Block : Cast-iron
1-barrel carburetor
V 8
Displacement : 5211 cc | 318.0 cu in. | 5.2 L.
Power : 230 BHP (169.28 KW) @ 4400 RPM
Bore : 3.9 in | 99 mm.
Stroke : 3.3 in | 84 mm.
Compression : 9.0:1
Main Bearings : 5
Valvetrain : 16 OHV (2 valves per cylinder)
Cylinder Block : Cast-iron
2-barrel carburetor
V 8
Displacement : 6276 cc | 383.0 cu in. | 6.3 L.
Power : 275 BHP (202.4 KW) @ 4400 RPM
Bore : 4.3 in | 108 mm.
Stroke : 3.4 in | 86 mm.
Compression : 9.2:1
Main Bearings : 5
Valvetrain : 16 OHV (2 valves per cylinder)
Cylinder Block : Cast-iron
2-barrel carburetor
V 8
Displacement : 7210 cc | 440.0 cu in. | 7.2 L.
Power : 370 BHP (272.32 KW) @ 4800 RPM
Bore : 4.3 in | 110 mm.
Stroke : 3.8 in | 95 mm.
Compression : 9.7:1
Main Bearings : 5
Valvetrain : 16 OHV (2 valves per cylinder)
Cylinder Block : Cast-iron
4-Barrel Carburetor
V 8 | With Hemispherical combustion chamber.
Displacement : 6981 cc | 426.0 cu in. | 7.0 L.
Power : 425 BHP (312.8 KW) @ 5600 RPM
Bore : 4.3 in | 108 mm.
Stroke : 3.8 in | 95 mm.
Compression : 10.25:1
Main Bearings : 5
Valvetrain : 16 OHV (2 valves per cylinder)
Cylinder Block : Cast-iron
2 Carter AFB 4-barrel carburetor
Transmission:
3 Manual , 3 Automatic TorqueFlite , 4 Manual

Total Dodge Production for 1971 : 551,386
Total 1971 Charger production : 82,114
1971 Dodge Charger
500 Series Hardtop 2 dr. 5 P : 11,948
500 Series SE Hardtop 2 dr. 5 P : 15,811
500 Series Super Bee Hardtop 2 dr. 5 P : 5,054
Coupe 2 dr. 6 P : 46,183
R/T Series Hardtop 2 dr. 5 P : 3,118

Coupe

Coupe
Chassis # 143101
View info And history
Auction entries : 1
Seating Capacity : 6
Doors : 2
Exterior
Length : 206.0 in | 5232 mm.
Wheelbase : 115.0 in | 2921 mm.

Hardtop

Hardtop
Chassis # WP29N1G201192
Auction entries : 3
Price : $2,972
Weight : 3238 lbs | 1468.732 kg
Seating Capacity : 6
Doors : 2
Exterior
Length : 206.0 in | 5232 mm.
Wheelbase : 115.0 in | 2921 mm.
Tires : E78-14

500 Series Hardtop

Price : $3,220
Weight : 3348 lbs | 1518.627 kg
Seating Capacity : 5
Doors : 2
Exterior
Length : 206.0 in | 5232 mm.
Wheelbase : 115.0 in | 2921 mm.

500 Series Super Bee Hardtop

Price : $3,270
Weight : 3638 lbs | 1650.169 kg
Seating Capacity : 5
Doors : 2
Exterior
Length : 206.0 in | 5232 mm.
Wheelbase : 115.0 in | 2921 mm.
Tires : E78-14

500 Series SE Hardtop

500 Series SE Hardtop
View info And history
Price : $3,420
Weight : 3372 lbs | 1529.513 kg
Seating Capacity : 5
Doors : 2
Exterior
Length : 206.0 in | 5232 mm.
Wheelbase : 115.0 in | 2921 mm.
Tires : E78-14

R/T Series Hardtop

R/T Series Hardtop
Price : $3,775
Weight : 3682 lbs | 1670.127 kg
Seating Capacity : 5
Doors : 2
Exterior
Length : 206.0 in | 5232 mm.
Wheelbase : 115.0 in | 2921 mm.
Tires : E78-14

Tires / Wheels
Tires : E78014 Belted Black Sidewall

Component

TIRES:MARKINGS

Manufacturer

CHRYSLER CORPORATION

NHTSA Campaign ID70V130000
NotesPOSSIBILITY THAT TIRE PRESSURE PLACARD ISSUED WITH VEHICLE DOES NOT HAVE TIREPRESSURE PRINTED ON IT.(CORRECT BY REPLACING WITH PLACARD PROPERLY FILLEDOUT.)

Component

VEHICLE SPEED CONTROL

Manufacturer

CHRYSLER CORPORATION

NHTSA Campaign ID71V050000
NotesCHRYSLER CAMPAIGN NO 104.EQUIPPED WITH AUTOMATIC SPEED CONTROL.AUTOMATICSPEED CONTROL MAY NOT DISENGAGE PROPERLY, CAUSING THROTTLE NOT TO RETURN TOIDLE.(CORRECT BY REPLACING CABLE.)

Component

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC

Manufacturer

CHRYSLER CORPORATION

NHTSA Campaign ID70V138000
NotesPOSSIBILITY THAT DISC BRAKE PROPOR- TIONING TEE MAY NOT FUNCTION PROPERLY.IFTHIS CONDITION EXISTS, PROPER AMOUNT OF BRAKE FLUID UNDER CERTAIN CONDITIONSWILL NOT BE DISTRIBUTED CORRECTLY TO BRAKING SYSTEM.WILL ALSO AFFECTACTUATING WARNING LIGHT ON INSTRUMENT PANEL IF FAILURE OF FRONT OR REAR BRAKESOCCURS.(CORRECT BY REPLACING TEE WHERE NECESSARY.)

Component

SEATS

Manufacturer

CHRYSLER CORPORATION

NHTSA Campaign ID71V003000
NotesCHRYSLER CAMPAIGN NO 100.EQUIPPED WITH SPLIT BACK BENCH SEAT S W/CENTER ARMREST.POSSIBILITY THAT FRAME-LOWER CROSSTUBE T O VERTICAL SUPPORT HINGE ARMJUNCTION ON SPLIT BACK FRONT SEATBENCH WITH CENTER ARM REST MAY HAVEINADEQUATE WELD.WELD FA ILURE AT THIS POINT COULD ALLOW SEAT BACK TODISENGAGE FROM SE AT CUSHION.(CORRECTBY REWELDING WHERE NECESSARY.)

Component

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM

Manufacturer

CHRYSLER CORPORATION

NHTSA Campaign ID71V004000
NotesCHRYSLER CAMPAIGN NO 097.EQUIPPED WITH FRONT DRUM BRAKES.P OSSIBILITY THATFRONT DRUM BRAKE SUPPORT PLATE MAY CONTAIN DEF ECTIVE BRAKE SHOE ANCHOR PIN.FAILURE OF PIN COULD CAUSE LOSSOF FRONT WHEEL BRAKES, WHICH WOULD REDUCEBRAKING ABILITY, SI NCE ONLY REAR WHEEL BRAKES WOULD CONTINUE TO OPERATE.(CORREC T BY REPLACING SHOE ANCHOR PIN WHERE NECESSARY)

Information provided by NHTSA
Data updated January 2023
1971 Averages
Avg. Household Income : $10,600
Avg. Home : $25,250
Avg. Gallon of Gas : $0.40
Avg. Stamp : $0

Popular frequently asked questions include:

What are the dimension and mechanical specifications of the 1971 Dodge Charger?
How many 1971 Dodge Charger were produced?
How powerful was the 1971 Dodge Charger? Was the 1971 Dodge Charger popular? Was the 1971 Dodge Charger expensive? What was the fuel economy of the 1971 Dodge Charger?

Q: What is the wheelbase size of the 1971 Dodge Charger? A: The 1971 Dodge Charger has a wheelbase size of 115.00 inches.

Q: What is the length of the 1971 Dodge Charger? A: The 1971 Dodge Charger has a length of 206.00 inches.

Q: How much did the 1971 Dodge Charger cost when new?A: The 1971 Dodge Charger cost approximately $2,710 to $3,775 (USD) when new.

Q: What were the bodystyles of the 1971 Dodge Charger? A: The 1971 Dodge Charger was offered as a 500 Series Hardtop, 500 Series SE Hardtop, 500 Series Super Bee Hardtop, Coupe, Hardtop, R/T Series Hardtop.

Q: What tires did the 1971 Dodge Charger have? A: The 1971 Dodge Charger had E78014 Belted Black Sidewall tires.

Q: How many vehicles did Dodge produce in 1971? A: Dodge produced 551,386 automobiles in 1971.

Q: How many 1971 Chargers were produced? A: Dodge produced 82,114 examples of the Charger in 1971.

Q: What engines did the 1971 Dodge Charger have? A: The 1971 Dodge Charger had the following engine options: Inline 6 (3687 cc | 225.0 cu in. | 3.7 L.) with 145 BHP (106.72 KW) @ 4000 RPM
  • V 8 (5211 cc | 318.0 cu in. | 5.2 L.) with 230 BHP (169.28 KW) @ 4400 RPM
  • V 8 (6276 cc | 383.0 cu in. | 6.3 L.) with 275 BHP (202.4 KW) @ 4400 RPM
  • V 8 (7210 cc | 440.0 cu in. | 7.2 L.) with 370 BHP (272.32 KW) @ 4800 RPM
  • V 8 (6981 cc | 426.0 cu in. | 7.0 L.) with 425 BHP (312.8 KW) @ 5600 RPM

    • Q: What transmissions did the 1971 Dodge Charger have? A: The 1971 Dodge Charger had the following gearbox options: 3 speed Manual, 3 speed Automatic TorqueFlite, 4 speed Manual.

    Dodge

    Vehicles
    News
    Concepts
    Recalls
    Dodge Sales Volume

    Similar Automakers

    Cadillac
    Chevrolet
    Chrysler
    Ford
    GMC
    Hummer
    Jeep
    Lincoln
    Mercury
    Pontiac
    Saturn

    Similarly Sized Vehicles
    from 1971

    Ford Ranchero
    Ford Torino

    Similarly Priced Vehicles

    Ford Mustang ($2,910-$4,120)
    Oldsmobile Cutlass Supreme ($3,336-$3,500)
    Pontiac Firebird ($3,047-$4,595)
    Dodge Challenger Pace Car ($3,200-$3,200)

    Average Auction Sale: $62,291

    Dodge Monthly Sales Volume

    March 2023
    50,975
    Additional Sales Volume Data