These are standard specifications for the 1971 Dodge Charger, not necessarily specifications for the vehicle(s) in the photo(s).
Transmission:
3 Manual , 3 Automatic TorqueFlite , 4 Manual
Chassis # 143101
View info And history
Auction entries : 1
Chassis # WP29N1G201192
Auction entries : 3
Information provided by NHTSA
Data updated June 2024
Features
Engine Location : | Front |
Drive Type : | Rear Wheel |
Production Years for Series : | 1971 - 1974 |
Price : | $2,710-$3,775 |
Weight : | 3220 lbs | 1460.567 kg |
Engine & Transmission
Inline 6 | |
---|---|
Displacement : | 3687 cc | 225.0 cu in. | 3.7 L. |
Power : | 145 BHP (106.72 KW) @ 4000 RPM |
Bore : | 3.4 in | 86 mm. |
Stroke : | 4.1 in | 105 mm. |
Compression : | 8.4:1 |
Main Bearings : | 4 |
Cylinder Block : | Cast-iron |
1-barrel carburetor |
V 8 | |
---|---|
Displacement : | 5211 cc | 318.0 cu in. | 5.2 L. |
Power : | 230 BHP (169.28 KW) @ 4400 RPM |
Bore : | 3.9 in | 99 mm. |
Stroke : | 3.3 in | 84 mm. |
Compression : | 9.0:1 |
Main Bearings : | 5 |
Valvetrain : | 16 OHV (2 valves per cylinder) |
Cylinder Block : | Cast-iron |
2-barrel carburetor |
V 8 | |
---|---|
Displacement : | 6276 cc | 383.0 cu in. | 6.3 L. |
Power : | 275 BHP (202.4 KW) @ 4400 RPM |
Bore : | 4.3 in | 108 mm. |
Stroke : | 3.4 in | 86 mm. |
Compression : | 9.2:1 |
Main Bearings : | 5 |
Valvetrain : | 16 OHV (2 valves per cylinder) |
Cylinder Block : | Cast-iron |
2-barrel carburetor |
V 8 | |
---|---|
Displacement : | 7210 cc | 440.0 cu in. | 7.2 L. |
Power : | 370 BHP (272.32 KW) @ 4800 RPM |
Bore : | 4.3 in | 110 mm. |
Stroke : | 3.8 in | 95 mm. |
Compression : | 9.7:1 |
Main Bearings : | 5 |
Valvetrain : | 16 OHV (2 valves per cylinder) |
Cylinder Block : | Cast-iron |
4-Barrel Carburetor |
V 8 | With Hemispherical combustion chamber. | |
---|---|
Displacement : | 6981 cc | 426.0 cu in. | 7.0 L. |
Power : | 425 BHP (312.8 KW) @ 5600 RPM |
Bore : | 4.3 in | 108 mm. |
Stroke : | 3.8 in | 95 mm. |
Compression : | 10.25:1 |
Main Bearings : | 5 |
Valvetrain : | 16 OHV (2 valves per cylinder) |
Cylinder Block : | Cast-iron |
2 Carter AFB 4-barrel carburetor |
3 Manual , 3 Automatic TorqueFlite , 4 Manual
Production Figures
Total Dodge Production for 1971 : | 551,386 |
Total 1971 Charger production : | 82,114 |
1971 Dodge Charger | |
500 Series Hardtop 2 dr. 5 P : | 11,948 |
500 Series SE Hardtop 2 dr. 5 P : | 15,811 |
500 Series Super Bee Hardtop 2 dr. 5 P : | 5,054 |
Coupe 2 dr. 6 P : | 46,183 |
R/T Series Hardtop 2 dr. 5 P : | 3,118 |
Dimension(s)
Coupe
Chassis # 143101
View info And history
Auction entries : 1
Seating Capacity : | 6 |
Doors : | 2 |
Exterior | |
---|---|
Length : | 206.0 in | 5232 mm. |
Wheelbase : | 115.0 in | 2921 mm. |
Hardtop
Chassis # WP29N1G201192
Auction entries : 3
Price : | $2,972 |
Weight : | 3238 lbs | 1468.732 kg |
Seating Capacity : | 6 |
Doors : | 2 |
Exterior | |
---|---|
Length : | 206.0 in | 5232 mm. |
Wheelbase : | 115.0 in | 2921 mm. |
Tires : | E78-14 |
500 Series Hardtop
Price : | $3,220 |
Weight : | 3348 lbs | 1518.627 kg |
Seating Capacity : | 5 |
Doors : | 2 |
Exterior | |
---|---|
Length : | 206.0 in | 5232 mm. |
Wheelbase : | 115.0 in | 2921 mm. |
500 Series Super Bee Hardtop
Price : | $3,270 |
Weight : | 3638 lbs | 1650.169 kg |
Seating Capacity : | 5 |
Doors : | 2 |
Exterior | |
---|---|
Length : | 206.0 in | 5232 mm. |
Wheelbase : | 115.0 in | 2921 mm. |
Tires : | E78-14 |
500 Series SE Hardtop
Price : | $3,420 |
Weight : | 3372 lbs | 1529.513 kg |
Seating Capacity : | 5 |
Doors : | 2 |
Exterior | |
---|---|
Length : | 206.0 in | 5232 mm. |
Wheelbase : | 115.0 in | 2921 mm. |
Tires : | E78-14 |
R/T Series Hardtop
Price : | $3,775 |
Weight : | 3682 lbs | 1670.127 kg |
Seating Capacity : | 5 |
Doors : | 2 |
Exterior | |
---|---|
Length : | 206.0 in | 5232 mm. |
Wheelbase : | 115.0 in | 2921 mm. |
Tires : | E78-14 |
Handling
Tires / Wheels | |
---|---|
Tires : | E78014 Belted Black Sidewall |
Recall
Component | VEHICLE SPEED CONTROL |
---|---|
Manufacturer | CHRYSLER CORPORATION |
NHTSA Campaign ID | 71V050000 |
Notes | CHRYSLER CAMPAIGN NO 104.EQUIPPED WITH AUTOMATIC SPEED CONTROL.AUTOMATICSPEED CONTROL MAY NOT DISENGAGE PROPERLY, CAUSING THROTTLE NOT TO RETURN TOIDLE.(CORRECT BY REPLACING CABLE.) |
Component | TIRES:MARKINGS |
---|---|
Manufacturer | CHRYSLER CORPORATION |
NHTSA Campaign ID | 70V130000 |
Notes | POSSIBILITY THAT TIRE PRESSURE PLACARD ISSUED WITH VEHICLE DOES NOT HAVE TIREPRESSURE PRINTED ON IT.(CORRECT BY REPLACING WITH PLACARD PROPERLY FILLEDOUT.) |
Component | SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC |
---|---|
Manufacturer | CHRYSLER CORPORATION |
NHTSA Campaign ID | 70V138000 |
Notes | POSSIBILITY THAT DISC BRAKE PROPOR- TIONING TEE MAY NOT FUNCTION PROPERLY.IFTHIS CONDITION EXISTS, PROPER AMOUNT OF BRAKE FLUID UNDER CERTAIN CONDITIONSWILL NOT BE DISTRIBUTED CORRECTLY TO BRAKING SYSTEM.WILL ALSO AFFECTACTUATING WARNING LIGHT ON INSTRUMENT PANEL IF FAILURE OF FRONT OR REAR BRAKESOCCURS.(CORRECT BY REPLACING TEE WHERE NECESSARY.) |
Component | SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM |
---|---|
Manufacturer | CHRYSLER CORPORATION |
NHTSA Campaign ID | 71V004000 |
Notes | CHRYSLER CAMPAIGN NO 097.EQUIPPED WITH FRONT DRUM BRAKES.P OSSIBILITY THATFRONT DRUM BRAKE SUPPORT PLATE MAY CONTAIN DEF ECTIVE BRAKE SHOE ANCHOR PIN.FAILURE OF PIN COULD CAUSE LOSSOF FRONT WHEEL BRAKES, WHICH WOULD REDUCEBRAKING ABILITY, SI NCE ONLY REAR WHEEL BRAKES WOULD CONTINUE TO OPERATE.(CORREC T BY REPLACING SHOE ANCHOR PIN WHERE NECESSARY) |
Component | SEATS |
---|---|
Manufacturer | CHRYSLER CORPORATION |
NHTSA Campaign ID | 71V003000 |
Notes | CHRYSLER CAMPAIGN NO 100.EQUIPPED WITH SPLIT BACK BENCH SEAT S W/CENTER ARMREST.POSSIBILITY THAT FRAME-LOWER CROSSTUBE T O VERTICAL SUPPORT HINGE ARMJUNCTION ON SPLIT BACK FRONT SEATBENCH WITH CENTER ARM REST MAY HAVEINADEQUATE WELD.WELD FA ILURE AT THIS POINT COULD ALLOW SEAT BACK TODISENGAGE FROM SE AT CUSHION.(CORRECTBY REWELDING WHERE NECESSARY.) |
Data updated June 2024
1971 Averages
Avg. Household Income : | $10,600 |
Avg. Home : | $25,250 |
Avg. Gallon of Gas : | $0.40 |
Avg. Stamp : | $0 |
1971 Dodge Charger FAQs (show)
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1971 Dodge Charger?
Q: What is the wheelbase size of the 1971 Dodge Charger? A: The 1971 Dodge Charger has a wheelbase size of 115.00 inches.Q: What is the length of the 1971 Dodge Charger? A: The 1971 Dodge Charger has a length of 206.00 inches.Q: How much did the 1971 Dodge Charger cost when new?A: The 1971 Dodge Charger cost approximately $2,710 to $3,775 (USD) when new.Q: What were the bodystyles of the 1971 Dodge Charger? A: The 1971 Dodge Charger was offered as a 500 Series Hardtop, 500 Series SE Hardtop, 500 Series Super Bee Hardtop, Coupe, Hardtop, R/T Series Hardtop.Q: What tires did the 1971 Dodge Charger have? A: The 1971 Dodge Charger had E78014 Belted Black Sidewall tires.Q: How many vehicles did Dodge produce in 1971? A: Dodge produced 551,386 automobiles in 1971.Q: How many 1971 Chargers were produced? A: Dodge produced 82,114 examples of the Charger in 1971.Q: What engines did the 1971 Dodge Charger have? A: The 1971 Dodge Charger had the following engine options: Inline 6 (3687 cc | 225.0 cu in. | 3.7 L.) with 145 BHP (106.72 KW) @ 4000 RPM V 8 (5211 cc | 318.0 cu in. | 5.2 L.) with 230 BHP (169.28 KW) @ 4400 RPM V 8 (6276 cc | 383.0 cu in. | 6.3 L.) with 275 BHP (202.4 KW) @ 4400 RPM V 8 (7210 cc | 440.0 cu in. | 7.2 L.) with 370 BHP (272.32 KW) @ 4800 RPM V 8 (6981 cc | 426.0 cu in. | 7.0 L.) with 425 BHP (312.8 KW) @ 5600 RPM Q: What transmissions did the 1971 Dodge Charger have? A: The 1971 Dodge Charger had the following gearbox options: 3 speed Manual, 3 speed Automatic TorqueFlite, 4 speed Manual.
What are the dimension and mechanical specifications of the 1971 Dodge Charger?
How many 1971 Dodge Charger were produced?
How powerful was the 1971 Dodge Charger? Was the 1971 Dodge Charger popular? Was the 1971 Dodge Charger expensive? What was the fuel economy of the 1971 Dodge Charger?
Q: What is the wheelbase size of the 1971 Dodge Charger? A: The 1971 Dodge Charger has a wheelbase size of 115.00 inches.Q: What is the length of the 1971 Dodge Charger? A: The 1971 Dodge Charger has a length of 206.00 inches.Q: How much did the 1971 Dodge Charger cost when new?A: The 1971 Dodge Charger cost approximately $2,710 to $3,775 (USD) when new.Q: What were the bodystyles of the 1971 Dodge Charger? A: The 1971 Dodge Charger was offered as a 500 Series Hardtop, 500 Series SE Hardtop, 500 Series Super Bee Hardtop, Coupe, Hardtop, R/T Series Hardtop.Q: What tires did the 1971 Dodge Charger have? A: The 1971 Dodge Charger had E78014 Belted Black Sidewall tires.Q: How many vehicles did Dodge produce in 1971? A: Dodge produced 551,386 automobiles in 1971.Q: How many 1971 Chargers were produced? A: Dodge produced 82,114 examples of the Charger in 1971.Q: What engines did the 1971 Dodge Charger have? A: The 1971 Dodge Charger had the following engine options: Inline 6 (3687 cc | 225.0 cu in. | 3.7 L.) with 145 BHP (106.72 KW) @ 4000 RPMSimilarly Sized Vehicles
from 1971
Similarly Priced Vehicles
Dodge Monthly Sales Volume
March 2023
50,975