1977 Rolls-Royce Camargue Technical Specifications and Dimensions

These are standard specifications - not necessarily specifications for the vehicle(s) in the photo(s).
Engine Location : Front
Drive Type : Rear Wheel
Body / Chassis : Steel unibody with auxiliary frames
Production Years for Series : 1975 - 1986
Price : $115,000
Weight : 5175 lbs | 2347.341 kg
Engine Type : V8 6751 cc | 412.0 cu in. | 6.8 L.
90-degree
220 BHP (161.92 KW)

Bore : 4.1 in | 104 mm.
Stroke : 3.9 in | 99 mm.

Transmission:
3 Automatic GM 400

Camargue Production (1975-1986) : 531
  : Possibly as many as 534
Component

VEHICLE SPEED CONTROL

Manufacturer

ROLLS-ROYCE MOTORS, INC.

NHTSA Campaign ID78V006000
SummaryTHE VEHICLE MAY REMAIN ON AUTOMATIC CRUISE CONTROL EVEN WHEN DRIVER ATTEMPTS TO BRAKE. THIS MALFUNCTION MAY OCCUR WITHOUT PRIOR WARNING.
RemedyAS A TEMPORARY SOLUTION, DEALER WILL REMOVE THE SLEEVE BALL CHAIN LINKING THE BELLOWS VACUUM ASSEMBLY TO THE ACCELERATOR THROTTLE LINKAGE.
NotesVEHICLE DESCRIPTION: PASSENGER VEHICLES.SYSTEM: EQUIPMENT; CRUISE CONTROL.CONSEQUENCES OF DEFECT: LOSS OF VEHICLE CONTROL AND AN ACCIDENT MAY OCCUR.NOTE: OWNER IS ADVISED NOT TO USE THE CRUISE CONTROL UNTIL THE VEHICLE HAS BEENINSPECTED AND CORRECTED.

Component

STEERING:RACK AND PINION

Manufacturer

ROLLS-ROYCE MOTORS, INC.

NHTSA Campaign ID77V089000
SummaryDURING VEHICLE ASSEMBLY THE FOLLOWING MAY NOT HAVE BEEN SUFFICIENTLY TIGHTENED: THE FOUR SETSCREWS SECURING THE STEERING RACK MOUNTING FRAME TO THE SUB-FRAME; FOUR NUTS AND BOLTS SECURING ENGINE FRONT MOUNT CROSS-MEMBERS TO THE SUB-FRAME; TWO SETSCREWS SECURING THE INNER BALL JOINT BRACKET TO THE STEERING RACK; AND THREE COUNTERSUNK SETSCREWS SECURING THE STEERING WHEEL TO ITS HUB.
RemedyTHE DEALER WILL TIGHTEN BOLTS AND SCREWS TO THE PROPER SPECIFICATIONS, AT NO COST TO OWNER.
NotesVEHICLE DESCRIPTION: PASSENGER VEHICLES.SYSTEM: STEERING; CONNECTIONS, SETSCREWS.CONSEQUENCES OF DEFECT: SHOULD ANY OF THESE BOLTS OR SETSCREWS BECOME LOOSE ORDETACHED, IMPAIRED STEERING OR COMPLETE LOSS OF STEERING CONTROL COULD OCCUR.THIS COULD LEAD TO A VEHICLE ACCIDENT.NOTE: IN THE EARLY STAGES, THIS DEFECT MAY BE DETECTED BY A KNOCK OR RATTLEEMANATING FROM THE FRONT OF THE CAR OR STEERING MECHANISM.

Component

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS

Manufacturer

ROLLS-ROYCE MOTORS, INC.

Mfr Report Date19740801
NHTSA Campaign ID80V066000
SummaryHEAT GENERATED BY CATALYTIC CONVERTERS MAY CAUSE DETERIORATION OF HYDRAULIC BRAKE HOSES ON CERTAIN VEHICLES. BRAKE HOSE MAY FAIL, RESULTING IN LOSS OF HYDRAULIC FLUID FROM THE DUAL HYDRAULIC SYSTEM.
RemedyDEALER WILL REPLACE HYDRAULIC BRAKE HOSES AND INSTALL A HEAT SHIELD TO PROTECT THEM, WITHOUT CHARGE.
NotesVEHICLE DESCRIPTION: PASSENGER VEHICLES.SYSTEM: SERVICE BRAKES; HYDRAULIC BRAKE HOSES.CONSEQUENCES OF DEFECT: LOSS OF HYDRAULIC FLUID WOULD CAUSE A DEGRADATION OFBRAKING EFFECTIVENESS WITH THE POTENTIAL FOR A VEHICLE ACCIDENT.NOTE: VEHICLE OPERATOR MAY BE WARNED OF IMPENDING BRAKE FAILURE BY ILLUMINATIONOF THE BRAKE WARNING LIGHTS.

Information provided by NHTSA
Data updated April 2017
Averages
Avg. Household Income : $15,000
Avg. Home : $49,300
Avg. Gallon of Gas : $0.65


Rolls-Royce Models


© 1998-2017. All rights reserved. The material may not be published, broadcast, rewritten, or redistributed.

Vehicle information, history, and specifications from concept to production.

Follow ConceptCarz on Facebook  Follow ConceptCarz on Twitter RSS News Feed

Conceptcarz.com
© 1998-2017 Conceptcarz.com Reproduction or reuse prohibited without written consent.