These are standard specifications for the 1991 Chevrolet Caprice, not necessarily specifications for the vehicle(s) in the photo(s).
Transmission:
4 Automatic with Overdrive
Chassis # 1G1BN53E4MW199418
Auction entries : 1
Information provided by NHTSA
Data updated January 2023
Features
| Engine Location : | Front |
| Drive Type : | Front Wheel |
| Production Years for Series : | 1991 - 1996 |
| Price : | $1,870-$17,875 |
| Weight : | 3900 lbs | 1769.01 kg |
Engine & Transmission
| V 8 90-degree | |
|---|---|
| Displacement : | 4998 cc | 305.0 cu in. | 5.0 L. |
| Power : | 230 BHP (169.28 KW) @ 4400 RPM |
| Torque : | 255 Ft-Lbs (346 NM) @ 2400 RPM |
| Bore : | 3.7 in | 95 mm. |
| Stroke : | 3.5 in | 88 mm. |
| Compression : | 9.3:1 |
| Construction : | Cast-iron block and head |
| Port fuel injection | |
| V 8 90-degree | |
|---|---|
| Displacement : | 5735 cc | 350.0 cu in. | 5.7 L. |
| Power : | 245 BHP (180.32 KW) @ 4400 RPM |
| Torque : | 345 Ft-Lbs (468 NM) @ 3200 RPM |
| Bore : | 4.0 in | 102 mm. |
| Stroke : | 3.5 in | 88 mm. |
| Compression : | 9.3:1 |
| Valvetrain : | 16 OHV (2 valves per cylinder) |
| Construction : | Cast-iron block and head |
| Tuned Port Fuel Injection System | |
4 Automatic with Overdrive
Production Figures
| Total Chevrolet Production for 1991 : | 895,569 |
| 1991 Chevrolet Caprice | |
| 3S Wagon 4 dr. 6 P : | 15,000 |
| Sedan 4 dr. 6 P : | 89,297 |
Dimension(s)
Sedan
| Fuel Capacity : | 23.0 Gal |
| Seating Capacity : | 6 |
| Doors : | 4 |
| Exterior | |
|---|---|
| Length : | 214.1 in | 5438 mm. |
| Width : | 77.0 in | 1956 mm. |
| Height : | 56.7 in | 1440 mm. |
| Wheelbase : | 115.9 in | 2944 mm. |
| Front Track : | 61.8 in | 1570 mm. |
| Rear Track : | 60.7 in | 1542 mm. |
3S Wagon
| Price : | $17,875 |
| Weight : | 4350 lbs | 1973.127 kg |
| Fuel Capacity : | 23.0 Gal |
| Seating Capacity : | 6 |
| Doors : | 4 |
| Exterior | |
|---|---|
| Length : | 214.1 in | 5438 mm. |
| Width : | 77.0 in | 1956 mm. |
| Height : | 56.7 in | 1440 mm. |
| Wheelbase : | 115.9 in | 2944 mm. |
| Front Track : | 61.8 in | 1570 mm. |
| Rear Track : | 60.7 in | 1542 mm. |
Classic Sedan
Chassis # 1G1BN53E4MW199418
Auction entries : 1
| Price : | $1,870 |
| Weight : | 3950 lbs | 1791.69 kg |
| Fuel Capacity : | 23.0 Gal |
| Seating Capacity : | 6 |
| Doors : | 4 |
| Exterior | |
|---|---|
| Length : | 214.1 in | 5438 mm. |
| Width : | 77.0 in | 1956 mm. |
| Height : | 56.7 in | 1440 mm. |
| Wheelbase : | 115.9 in | 2944 mm. |
| Front Track : | 61.8 in | 1570 mm. |
| Rear Track : | 60.7 in | 1542 mm. |
Handling
| Suspension | |
|---|---|
| Front : Unequal-length control arms, coil springs, and stabilizer bar Rear : Salisbury four link coil springs, and stabilizer | |
| Steering | |
|---|---|
| Recirculating Ball |
| Tires / Wheels | |
|---|---|
| Tires : | P215/75R15 |
Recall
| Component | EQUIPMENT |
|---|---|
| Manufacturer | HONEYWELL INTERNATIONAL, INC. |
| NHTSA Campaign ID | 07E088000 |
| Summary | CERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS ARE MARKED WITH A DATE CODE A61451 THROUGH A72571 SEQUENTIALLY. THE DATE CODE AND PART NUMBER APPEAR ON THE FILTER HOUSING. FRAM RACING HP4 AND HP8 OIL FILTERS NOT BEARING A DATE CODE IN THIS RANGE ARE NOT AFFECTED BY THIS RECALL. THE GASKET OF THE OIL FILTER BECOMES MORE PLIABLE UNDER HIGH TEMPERATURES AND PRESSURES. |
| Consequence | THIS CONDITION MAY CAUSE INADEQUATE SEALING AND LOSS OF ENGINE OIL, POSSIBLY RESULTING IN A FIRE. |
| Remedy | HONEYWELL WILL REPLACE THE AFFECTED OIL FILTERS FREE OF CHARGE. THE RECALL BEGAN DURING NOVEMBER 2007. OWNERS CAN CONTACT FRAM CUSTOMER SERVICE TOLL-FREE AT 1-800-890-2075. |
| Notes | CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV. |
| Component | EXTERIOR LIGHTING |
|---|---|
| Manufacturer | AJ MOTORSPORT |
| NHTSA Campaign ID | 06E065000 |
| Summary | CERTAIN AJ MOTORSPORT COMBINATION LAMPS SOLD AS REPLACEMENT LAMPS FOR USE ON THE ABOVE LISTED PASSENGER VEHICLES. COMBINATION LAMPS NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT. |
| Consequence | LACK OF AMBER SIDE REFLECTORS IN THE LAMPS WILL DECREASE LIGHTING VISIBILITY TO OTHER DRIVERS AND MAY POSSIBLY RESULT IN A VEHICLE CRASH. |
| Remedy | AJ MOTORSPORT WILL NOTIFY OWNERS AND OFFER REIMBURSEMENT FOR THE LAMPS. THE RECALL BEGAN ON JULY 31, 2006. OWNERS MAY CONTACT AJ MOTORSPORT AT 626-618-2026. |
| Notes | THIS RECALL ONLY PERTAINS TO AJ MOTORSPORT AFTERMARKET LAMPS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON THE LISTED PASSENGER VEHICLES.FOR MORE INFORMATION ON THE LAMP MODEL NUMBERS, CLICK ON DOCUMENT SEARCH AND VIEW DOCUMENT TITLED 'LAMP MODEL NUMBERS.'CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV. |
| Component | EXTERIOR LIGHTING |
|---|---|
| Manufacturer | PRO-A MOTORS, INC. |
| NHTSA Campaign ID | 06E026000 |
| Summary | CERTAIN PRO-A MOTORS CORNER LAMPS, TURN SIGNALS, AND HEADLIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT. |
| Consequence | WITHOUT THE AMBER REFLECTORS, THE VEHICLE WILL BE POORLY ILLUMINATED, POSSIBLY RESULTING IN A VEHICLE CRASH WITHOUT WARNING. |
| Remedy | PRO-A MOTORS WILL NOTIFY OWNERS AND OFFER TO REPURCHASE THE LAMPS. THE RECALL BEGAN ON APRIL 3, 2006. OWNERS MAY CONTACT PRO-A MOTORS AT 323-838-2988. |
| Notes | THIS RECALL ONLY PERTAINS TO PRO-A MOTORS AFTERMARKET LAMPS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON THE LISTED PASSENGER VEHICLES.FOR MORE INFORMATION ON THE LAMP MODEL NUMBERS, CLICK ON DOCUMENT SEARCH AND VIEW DOCUMENT TITLED 'LAMP MODEL NUMBERS.'CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV. |
| Component | LATCHES/LOCKS/LINKAGES:HOOD:LATCH |
|---|---|
| Manufacturer | GENERAL MOTORS CORP. |
| Mfr Report Date | 19891001 |
| NHTSA Campaign ID | 91V186000 |
| Summary | SECONDARY HOOD LATCH ASSEMBLIES CAN CORRODE, CAUSING A HIGH LATCH RELEASE EFFORT AND POSSIBLY PREVENTING THE HOOD FROM LATCHING PROPERLY WHEN IT IS CLOSED. |
| Consequence | IF THE SECONDARY HOOD LATCH IS NOT PROPERLY ENGAGED, ANDTHE PRIMARY HOOD LATCH WAS ALSO NOT ENGAGED, THE HOOD COULD OPEN AND CONTACT THEWINDSHIELD WHILE THE VEHICLE WAS IN MOTION, REDUCING THE FORWARD VISION AREA OFTHE DRIVER AND RESULTING IN A POSSIBLE VEHICLE ACCIDENT WITHOUT PRIOR WARNING. |
| Remedy | INSTALL A NEW SECONDARY HOOD LATCH ASSEMBLY. |
| Notes | SYSTEM: SECONDARY HOOD LATCH.VEHICLE DESCRIPTION: PASSENGER CARS. |
| Component | SEAT BELTS |
|---|---|
| Manufacturer | GENERAL MOTORS CORP. |
| Mfr Report Date | 19900301 |
| NHTSA Campaign ID | 92V094000 |
| Summary | THE SHOULDER BELT GUIDE LOOP PLASTIC COVERING MAY CRACK AND EXPOSE THE STEEL SUB-PLATE. |
| Consequence | IN THE EVENT OF A VEHICLE CRASH, THE EXPOSED STEELSUB-PLATE CAN CUT THE SAFETY BELT WEBBING RESULTING IN INCREASED POSSIBILITYAND/OR SEVERITY OF INJURY TO THE AFFECTED SEAT OCCUPANT. |
| Remedy | INSTALL NEW SHOULDER BELT GUIDE LOOPS. |
| Notes | SYSTEM: ACTIVE SAFETY BELT.VEHICLE DESCRIPTION: PASSENGER CARS; GENERAL MOTORS 'B' SERIES. |
| Component | SUSPENSION:REAR |
|---|---|
| Manufacturer | GENERAL MOTORS CORP. |
| Mfr Report Date | 19900401 |
| NHTSA Campaign ID | 96V020000 |
| Summary | THE REAR LOWER CONTROL ARM CAN CRACK AT THE REAR STABILIZER BAR ATTACHMENT. |
| Consequence | THIS CONDITION CAN BE AGGRAVATED BY THE SEVERE DUTY CYCLE OF THESE VEHICLES AND EVENTUALLY CAUSE THE LOWER CONTROL ARM TO FRACTURE COMPLETELY CAUSING A LOSS OF VEHICLE CONTROL WITHOUT PRIOR WARNING. |
| Remedy | DEALERS WILL REPLACE BOTH REAR LOWER CONTROL ARMS AND REAR STABILIZER BAR ATTACHMENTS. |
| Notes | SYSTEM: SUSPENSION; SINGLE AXLE; REAR; CONTROL ARM. VEHICLE DESCRIPTION: POLICE (SEO 9C1) VEHICLES AND TAXI CABS (SEO 9C6). NOTE: OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME, SHOULD CONTACT CHEVROLET AT 1-800-222-1020. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393. |
| Component | WHEELS |
|---|---|
| Manufacturer | GENERAL MOTORS CORP. |
| Mfr Report Date | 19910301 |
| NHTSA Campaign ID | 92V089000 |
| Summary | THE STEEL WHEELS EXHIBIT FATIGUE CRACKING AROUND THE CIRCUMFERENCE OF THE WHEEL LUG ***** MOUNTING SURFACE DUE TO WHEEL BENDING CAUSED BY FREQUENT MISUSE OF TIRE MOUNTING EQUIPMENT, LUG ***** OVERTORQUING, AND THE UNUSUAL OPERATING CONDITIONS EXPERIENCED BY POLICE VEHICLES. |
| Consequence | THE CRACKING CAN CAUSE WHEEL FRACTURING AND SUBSEQUENTSEPARATION FROM THE AXLE, WHICH COULD RESULT IN A VEHICLE ACCIDENT. |
| Remedy | REPLACE THE DEFECTIVE WHEELS WITH REDESIGNED STEEL WHEELS. |
| Notes | SYSTEM: WHEELS.VEHICLE DESCRIPTION: POLICE CARS EQUIPPED WITH SPECIAL POLICE PACKAGE WHICHINCLUDES 15 INCH BY 7 INCH STEEL WHEELS WITH WHEEL CODE RDL. |
| Component | ELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS |
|---|---|
| Manufacturer | GENERAL MOTORS CORP. |
| Mfr Report Date | 19910701 |
| NHTSA Campaign ID | 93V018000 |
| Summary | SYSTEM: ELECTRICAL.VEHICLE DESCRIPTION: SEQ 9C1 POLICE CARS IN CORROSION AREAS OF THE US AND CANADA ONLY. NOTE: VEHICLES ORIGINALLY SOLD OR CURRENTLY REGISTERED IN THE STATES OF: CONNECTICUT, ILLINOIS, INDIANA, MAINE, MASSACHUSETTS, MICHIGAN, NEW HAMPSHIRE, NEWJERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, AND WISCONSIN. A ELECTRICAL GROUND-OUT CONDITION MAY EXIST BETWEEN THE 12 VOLT JUNCTION BLOCK AND THE METAL INNER FENDER SKIRT. |
| Consequence | THIS CONDITION CAN CAUSE A MELTED JUNCTION BLOCK, SMOKE,AND BURNED UNDERHOOD WIRING RESULTING IN A DISABLED VEHICLE OR A VEHICLE FIRE.THIS CONDITION CAN OCCUR WHILE THE VEHICLE IS IN OPERATION OR WHILE THE VEHICLEIS PARKED AND THE IGNITION IS IN THE 'OFF' POSITION. |
| Remedy | INSTALL A SHIELDING INSULATOR UNDER THE JUNCTION BLOCK. |
Data updated January 2023
1991 Averages
| Avg. Household Income : | $29,430 |
| Avg. Home : | $120,000 |
| Avg. Gallon of Gas : | $1.12 |
1991 Chevrolet Caprice FAQs (show)
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1991 Chevrolet Caprice?
Q: What is the wheelbase size of the 1991 Chevrolet Caprice? A: The 1991 Chevrolet Caprice has a wheelbase size of 115.90 inches.Q: What is the length of the 1991 Chevrolet Caprice? A: The 1991 Chevrolet Caprice has a length of 214.10 inches.Q: What is the width of the 1991 Chevrolet Caprice? A: The 1991 Chevrolet Caprice has a width of 77.00 inches.Q: How much did the 1991 Chevrolet Caprice cost when new?A: The 1991 Chevrolet Caprice cost approximately $1,870 to $17,875 (USD) when new.Q: What were the bodystyles of the 1991 Chevrolet Caprice? A: The 1991 Chevrolet Caprice was offered as a 3S Wagon, Classic Sedan, Sedan.Q: What tires did the 1991 Chevrolet Caprice have? A: The 1991 Chevrolet Caprice had P215/75R15 tires.Q: How many vehicles did Chevrolet produce in 1991? A: Chevrolet produced 895,569 automobiles in 1991.Q: What engines did the 1991 Chevrolet Caprice have? A: The 1991 Chevrolet Caprice had the following engine options: V 8 (4998 cc | 305.0 cu in. | 5.0 L.) with 230 BHP (169.28 KW) @ 4400 RPM and 255 Ft-Lbs (346 NM) @ 2400 RPM V 8 (5735 cc | 350.0 cu in. | 5.7 L.) with 245 BHP (180.32 KW) @ 4400 RPM and 345 Ft-Lbs (468 NM) @ 3200 RPM Q: What transmission did the 1991 Chevrolet Caprice have? A: The 1991 Chevrolet Caprice had a 4 speed Automatic with Overdrive gearbox.
What are the dimension and mechanical specifications of the 1991 Chevrolet Caprice?
How many 1991 Chevrolet Caprice were produced?
How powerful was the 1991 Chevrolet Caprice? Was the 1991 Chevrolet Caprice popular? Was the 1991 Chevrolet Caprice expensive? What was the fuel economy of the 1991 Chevrolet Caprice?
Q: What is the wheelbase size of the 1991 Chevrolet Caprice? A: The 1991 Chevrolet Caprice has a wheelbase size of 115.90 inches.Q: What is the length of the 1991 Chevrolet Caprice? A: The 1991 Chevrolet Caprice has a length of 214.10 inches.Q: What is the width of the 1991 Chevrolet Caprice? A: The 1991 Chevrolet Caprice has a width of 77.00 inches.Q: How much did the 1991 Chevrolet Caprice cost when new?A: The 1991 Chevrolet Caprice cost approximately $1,870 to $17,875 (USD) when new.Q: What were the bodystyles of the 1991 Chevrolet Caprice? A: The 1991 Chevrolet Caprice was offered as a 3S Wagon, Classic Sedan, Sedan.Q: What tires did the 1991 Chevrolet Caprice have? A: The 1991 Chevrolet Caprice had P215/75R15 tires.Q: How many vehicles did Chevrolet produce in 1991? A: Chevrolet produced 895,569 automobiles in 1991.Q: What engines did the 1991 Chevrolet Caprice have? A: The 1991 Chevrolet Caprice had the following engine options: V 8 (4998 cc | 305.0 cu in. | 5.0 L.) with 230 BHP (169.28 KW) @ 4400 RPM and 255 Ft-Lbs (346 NM) @ 2400 RPMSimilarly Sized Vehicles
from 1991
Chevrolet Monthly Sales Volume
March 2023
398,141