These are standard specifications for the 1967 Ford Mustang, not necessarily specifications for the vehicle(s) in the photo(s).
Transmission:
3 Automatic , 5 Manual , Automatic SelectShift Cruise-O-Matic
Chassis # 7F03S170703
View info And history
Auction entries : 1
Chassis # 7T03C282493
Auction entries : 1
Information provided by NHTSA
Data updated January 2023
Features
| Engine Location : | Front |
| Drive Type : | Rear Wheel |
| Production Years for Series : | 1964 - 1973 |
| Price : | $2,460-$2,695 |
| Weight : | 2577 lbs | 1168.908 kg |
Performance
| 1/4 Mile : | 15.2 seconds. |
Engine & Transmission
| Inline 6 | |
|---|---|
| Displacement : | 3277 cc | 200.0 cu in. | 3.3 L. |
| Power : | 120 BHP (88.32 KW) @ 4400 RPM |
| Bore : | 3.7 in | 93 mm. |
| Stroke : | 3.1 in | 80 mm. |
| Compression : | 9.2:1 |
| Main Bearings : | 7 |
| Valvetrain : | 12 OHV (2 valves per cylinder) |
| Cylinder Block : | Cast-iron |
| Holley 1-barrel carburetor | |
| V 8 | |
|---|---|
| Displacement : | 4736 cc | 289.0 cu in. | 4.7 L. |
| Power : | 195 HP (143.52 KW) @ 4600 RPM |
| Bore : | 4.0 in | 102 mm. |
| Stroke : | 2.9 in | 73 mm. |
| Compression : | 8.7:1 |
| Main Bearings : | 5 |
| Valvetrain : | 16 OHV (2 valves per cylinder) |
| Cylinder Block : | Cast-iron |
| Ford 2 Barrel Autolite | |
| V 8 | |
|---|---|
| Displacement : | 4736 cc | 289.0 cu in. | 4.7 L. |
| Power : | 271 BHP (199.456 KW) @ 6000 RPM |
| Bore : | 4.0 in | 102 mm. |
| Stroke : | 2.9 in | 73 mm. |
| Compression : | 10.5:1 |
| Main Bearings : | 5 |
| Valvetrain : | 16 OHV (2 valves per cylinder) |
| Cylinder Block : | Cast-iron |
| Holley 4-barrel carburetor | |
| V 8 | |
|---|---|
| Displacement : | 6391 cc | 390.0 cu in. | 6.4 L. |
| Power : | 320 BHP (235.52 KW) @ 4600 RPM |
| Bore : | 4.1 in | 103 mm. |
| Stroke : | 3.8 in | 96 mm. |
| Compression : | 10.5:1 |
| Main Bearings : | 5 |
| Valvetrain : | 16 OHV (2 valves per cylinder) |
| Cylinder Block : | Cast-iron |
| Holley 4-barrel carburetor | |
3 Automatic , 5 Manual , Automatic SelectShift Cruise-O-Matic
Production Figures
| Total Ford Production for 1967 : | 1,730,224 |
| Total 1967 Mustang production : | 472,121 |
| 1967 Ford Mustang | |
| Convertible 2 dr. 4 P : | 44,808 |
| Fastback Coupe 2 dr. 4 P : | 71,042 |
| HardTop Coupe 2 dr. 4 P : | 356,271 |
Dimension(s)
HardTop Coupe
| Seating Capacity : | 4 |
| Doors : | 2 |
| Exterior | |
|---|---|
| Length : | 183.6 in | 4663 mm. |
| Width : | 71.3 in | 1811 mm. |
| Wheelbase : | 108.0 in | 2743 mm. |
Fastback Coupe
| Price : | $2,590 |
| Weight : | 2603 lbs | 1180.701 kg |
| Seating Capacity : | 4 |
| Doors : | 2 |
| Exterior | |
|---|---|
| Length : | 183.6 in | 4663 mm. |
| Width : | 71.3 in | 1811 mm. |
| Wheelbase : | 108.0 in | 2743 mm. |
| Tires : | 6.95 x 14 Four-Ply Tubeless Blackwall |
Convertible
Chassis # 7F03S170703
View info And history
Auction entries : 1
Chassis # 7T03C282493
Auction entries : 1
| Price : | $2,695 |
| Weight : | 2735 lbs | 1240.575 kg |
| Seating Capacity : | 4 |
| Doors : | 2 |
| Exterior | |
|---|---|
| Length : | 183.6 in | 4663 mm. |
| Width : | 71.3 in | 1811 mm. |
| Wheelbase : | 108.0 in | 2743 mm. |
Handling
| Tires / Wheels | |
|---|---|
| Tires : | 6.95 x 14 Four-Ply Tubeless Blackwall |
Recall
| Component | STEERING:LINKAGES:KNUCKLE:SPINDLE:ARM |
|---|---|
| Manufacturer | Drake Automotive Group LLC |
| NHTSA Campaign ID | 19E011000 |
| Summary | Drake Automotive Group, LLC (Drake) is recalling certain Scott Drake left and right wheel spindles, part numbers C5ZZ-3106-L, C5ZZ-3105-R, C70Z-3106-L, C70Z-3105-R sold for use on 1965-1966 Ford Mustang V8s and 1967-1969 Ford Mustangs (all vehicles with drums). The spindle may fail resulting in the wheel and tire detaching from the vehicle's steering system. |
| Consequence | Spindle failure can cause a loss of steering control, increasing the risk of a crash. |
| Remedy | Drake Automotive Group, LLC will notify owners and will replace all of the recalled units, free of charge. The recall began March 17, 2019. Owners may contact Drake automotive at 1-800-999-0289. |
| Notes | Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. |
| Component | STRUCTURE:BODY |
|---|---|
| Manufacturer | FORD MOTOR COMPANY |
| NHTSA Campaign ID | 66V004005 |
| Notes | POSSIBLE THAT, UNDER CONDITIONS SUCH AS SHARP TURNS WHILE ASCENDING DRIVEWAY GRADES, THE LARGE SIZE TIRES LISTED WILL RUB AGAINST THE FRONT FENDER AND/OR WHEEL OPENING MOULDING.THIS CAUSES OBJECTIONABLE NOISE, AND IF DONE REPEATEDLY, WILL SCUFF THE OUTER EDGE OF THE TIRE.(REWORK FRONT FENDER WHEEL OPENING FLANGE AND REMOVE MOULDINGS TO ELIMINATE POSSIBLE INTERFERENCE.) |
| Component | STEERING:GEAR BOX (OTHER THAN RACK AND PINION) |
|---|---|
| Manufacturer | FORD MOTOR COMPANY |
| NHTSA Campaign ID | 66V004006 |
| Notes | MANUAL STEERING GEAR ASSEMBLIES MAY CONTAIN A DIMENSIONAL DISCREPANCY IN THE STEERING GEAR BALL ***** GROOVE.THIS DISCREPANCY CAN RESULT IN STEERING GEAR LOCK-UP AT LOW MILEAGE.(INSTALL NEW STEERING GEAR ASSEMBLY.) |
| Component | STEERING: STEERING WHEEL/HANDLE BAR |
|---|---|
| Manufacturer | FORD MOTOR COMPANY |
| NHTSA Campaign ID | 67V091000 |
| Notes | POSSIBILITY THAT THE STEERING WHEEL RETAINING ***** WAS IMPROPERLY INSTALLED.THIS COULD ALLOW THE STEERING WHEEL TO BECOME LOOSE OR DISCONNECTED.(INSPECT AND SECURE STEERING WHEEL RETAINING ***** AS REQUIRED.) |
| Component | STEERING: STEERING WHEEL/HANDLE BAR |
|---|---|
| Manufacturer | FORD MOTOR COMPANY |
| NHTSA Campaign ID | 67V112000 |
| Notes | POSSIBLE STEERING WHEEL SPOKE BREAKAGE INVOLVING ONE OR MORE OF THE METAL INSERTS WITHIN THE PLASTIC SPOKE.UNDER EXTENDED USAGE THE SEPARATION MAY EXTEND TO ALL THREE METAL INSERTS AND EVENTUALLY AFFECT STEERING CONTROL.(INSPECT AND REPLACE STEERING WHEELS AS NECESSARY.) |
Data updated January 2023
1967 Averages
| Avg. Car Cost : | $2,750 |
| Avg. Household Income : | $7,300 |
| Avg. Home : | $14,250 |
| Avg. Gallon of Gas : | $0.33 |
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1967 Ford Mustang?
Q: What is the wheelbase size of the 1967 Ford Mustang? A: The 1967 Ford Mustang has a wheelbase size of 108.00 inches.Q: What is the length of the 1967 Ford Mustang? A: The 1967 Ford Mustang has a length of 183.60 inches.Q: What is the width of the 1967 Ford Mustang? A: The 1967 Ford Mustang has a width of 71.30 inches.Q: How much did the 1967 Ford Mustang cost when new?A: The 1967 Ford Mustang cost approximately $2,460 to $2,695 (USD) when new.Q: What were the bodystyles of the 1967 Ford Mustang? A: The 1967 Ford Mustang was offered as a Convertible, Fastback Coupe, HardTop Coupe.Q: What tires did the 1967 Ford Mustang have? A: The 1967 Ford Mustang had 6.95 x 14 Four-Ply Tubeless Blackwall tires.Q: How many vehicles did Ford produce in 1967? A: Ford produced 1,730,224 automobiles in 1967.Q: How many 1967 Mustangs were produced? A: Ford produced 472,121 examples of the Mustang in 1967.Q: What engines did the 1967 Ford Mustang have? A: The 1967 Ford Mustang had the following engine options: Inline 6 (3277 cc | 200.0 cu in. | 3.3 L.) with 120 BHP (88.32 KW) @ 4400 RPM V 8 (4736 cc | 289.0 cu in. | 4.7 L.) with 195 HP (143.52 KW) @ 4600 RPM V 8 (4736 cc | 289.0 cu in. | 4.7 L.) with 271 BHP (199.456 KW) @ 6000 RPM V 8 (6391 cc | 390.0 cu in. | 6.4 L.) with 320 BHP (235.52 KW) @ 4600 RPM Q: What transmissions did the 1967 Ford Mustang have? A: The 1967 Ford Mustang had the following gearbox options: 3 speed Automatic, 5 speed Manual, Automatic SelectShift Cruise-O-Matic.
