These are standard specifications for the 1995 Ford Mustang, not necessarily specifications for the vehicle(s) in the photo(s).
Transmission:
5 Manual Floor shift , 4 Automatic with Overdrive
Chassis # 1FALP42T3SF186470
Chassis # 1FALP42C2SF213688
View info And history
Auction entries : 2
Chassis # 1FALP42C5SF213605
View info And history
Auction entries : 1
Chassis # 1FALP42C1SF213570
View info And history
Chassis # 1FALP47V5TF100054
Chassis # 1FALP42D8SF186294
View info And history
Auction entries : 1
Information provided by NHTSA
Data updated January 2023
Features
| Engine Location : | Front |
| Drive Type : | Rear Wheel |
| Body / Chassis : | Unibody |
| Production Years for Series : | 1994 - 2004 |
| Price : | $14,331-$24,072 |
| Weight : | 3075 lbs | 1394.797 kg |
Performance
| 0-60 mph : | 7.2 seconds. |
| Top Speed : | 131 mph | 210.779 km/h |
Engine & Transmission
| V 6 | |
|---|---|
| Displacement : | 3802 cc | 232.0 cu in. | 3.8 L. |
| Power : | 145 BHP (106.72 KW) @ 4000 RPM |
| Torque : | 215 Ft-Lbs (292 NM) @ 2500 RPM |
| Bore : | 3.8 in | 97 mm. |
| Stroke : | 3.4 in | 86 mm. |
| Compression : | 9.0:1 |
| Construction : | Cast-iron block and head |
| Sequential Fuel Injection | |
| V 8 | |
|---|---|
| Displacement : | 4949 cc | 302.0 cu in. | 5.0 L. |
| Power : | 215 HP (158.24 KW) @ 4100 RPM |
| Torque : | 285 Ft-Lbs (386 NM) @ 3400 RPM |
| Bore : | 4.0 in | 102 mm. |
| Stroke : | 3.0 in | 76 mm. |
| Compression : | 9.0:1 |
| Valvetrain : | 32 OHV (4 valves per cylinder) |
| Construction : | Cast-iron block and head |
| Sequential Fuel Injection | |
| V 8 90-degree | |
|---|---|
| Displacement : | 4949 cc | 302.0 cu in. | 5.0 L. |
| Power : | 240 BHP (176.64 KW) @ 4800 RPM |
| Torque : | 285 Ft-Lbs (386 NM) @ 4000 RPM |
| Bore : | 4.0 in | 102 mm. |
| Stroke : | 3.0 in | 76 mm. |
| Compression : | 9.0:1 |
| Construction : | Cast-iron block and head |
| Sequential Fuel Injection | |
5 Manual Floor shift , 4 Automatic with Overdrive
Production Figures
| Total Ford Production for 1995 : | 1,012,818 |
| Total 1995 Mustang production : | 170,033 |
| 1995 Ford Mustang | |
| Cobra Convertible 2 dr. 4 P : | 1,003 |
| Cobra Coupe 2 dr. 4 P : | 4,005 |
| Convertible 2 dr. 4 P : | 44,593 |
| Coupe 2 dr. 4 P : | 120,432 |
Dimension(s)
Coupe
| Fuel Capacity : | 15.4 Gal |
| Seating Capacity : | 4 |
| Doors : | 2 |
| Exterior | |
|---|---|
| Length : | 181.5 in | 4610 mm. |
| Width : | 71.8 in | 1824 mm. |
| Height : | 52.8 in | 1341 mm. |
| Wheelbase : | 101.3 in | 2573 mm. |
| Front Track : | 60.6 in | 1539 mm. |
| Rear Track : | 59.1 in | 1501 mm. |
Convertible
| Price : | $20,800 |
| Weight : | 3260 lbs | 1478.711 kg |
| Fuel Capacity : | 15.4 Gal |
| Seating Capacity : | 4 |
| Doors : | 2 |
| Exterior | |
|---|---|
| Length : | 181.5 in | 4610 mm. |
| Width : | 71.8 in | 1824 mm. |
| Height : | 52.8 in | 1341 mm. |
| Wheelbase : | 101.3 in | 2573 mm. |
| Front Track : | 60.6 in | 1539 mm. |
| Rear Track : | 59.1 in | 1501 mm. |
| Tires : | P205/65R15 |
GT Coupe
| Price : | $17,906 |
| Weight : | 3281 lbs | 1488.237 kg |
| Fuel Capacity : | 15.4 Gal |
| Seating Capacity : | 4 |
| Doors : | 2 |
| Exterior | |
|---|---|
| Length : | 181.5 in | 4610 mm. |
| Width : | 71.8 in | 1824 mm. |
| Height : | 52.8 in | 1341 mm. |
| Wheelbase : | 101.3 in | 2573 mm. |
| Front Track : | 60.6 in | 1539 mm. |
| Rear Track : | 59.1 in | 1501 mm. |
| Tires : | P225/55ZR16 |
GTS Coupe
Chassis # 1FALP42T3SF186470
| Price : | $14,331 |
| Weight : | 3245 lbs | 1471.907 kg |
| Fuel Capacity : | 15.4 Gal |
| Seating Capacity : | 4 |
| Doors : | 2 |
| Exterior | |
|---|---|
| Length : | 181.5 in | 4610 mm. |
| Width : | 71.8 in | 1824 mm. |
| Height : | 52.8 in | 1341 mm. |
| Wheelbase : | 101.3 in | 2573 mm. |
| Front Track : | 60.6 in | 1539 mm. |
| Rear Track : | 59.1 in | 1501 mm. |
| Tires : | P225/55ZR16 |
GT Convertible
| Price : | $22,600 |
| Weight : | 3450 lbs | 1564.894 kg |
| Fuel Capacity : | 15.4 Gal |
| Seating Capacity : | 4 |
| Doors : | 2 |
| Exterior | |
|---|---|
| Length : | 181.5 in | 4610 mm. |
| Width : | 71.8 in | 1824 mm. |
| Height : | 52.8 in | 1341 mm. |
| Wheelbase : | 101.3 in | 2573 mm. |
| Front Track : | 60.6 in | 1539 mm. |
| Rear Track : | 59.1 in | 1501 mm. |
| Tires : | P225/55ZR16 |
Cobra Coupe
Chassis # 1FALP42C2SF213688
View info And history
Auction entries : 2
Chassis # 1FALP42C5SF213605
View info And history
Auction entries : 1
Chassis # 1FALP42C1SF213570
View info And history
Chassis # 1FALP47V5TF100054
Chassis # 1FALP42D8SF186294
View info And history
Auction entries : 1
| Price : | $21,312 |
| Weight : | 3355 lbs | 1521.802 kg |
| Fuel Capacity : | 15.4 Gal |
| Seating Capacity : | 4 |
| Doors : | 2 |
| Exterior | |
|---|---|
| Length : | 181.5 in | 4610 mm. |
| Width : | 71.8 in | 1824 mm. |
| Height : | 52.8 in | 1341 mm. |
| Wheelbase : | 101.3 in | 2573 mm. |
| Front Track : | 60.6 in | 1539 mm. |
| Rear Track : | 59.1 in | 1501 mm. |
| Tires : | P225/55ZR16 |
Cobra Convertible
| Price : | $24,072 |
| Weight : | 3525 lbs | 1598.913 kg |
| Fuel Capacity : | 15.4 Gal |
| Seating Capacity : | 4 |
| Doors : | 2 |
| Exterior | |
|---|---|
| Length : | 181.5 in | 4610 mm. |
| Width : | 71.8 in | 1824 mm. |
| Height : | 52.8 in | 1341 mm. |
| Wheelbase : | 101.3 in | 2573 mm. |
| Front Track : | 60.6 in | 1539 mm. |
| Rear Track : | 59.1 in | 1501 mm. |
| Tires : | P225/55ZR16 |
Handling
| Suspension | |
|---|---|
| Front : Modified MacPherson gas-pressurized struts and stabilizer bar Rear : Rigid axle with four links and coil springs adn gas schocks | |
| Steering | |
|---|---|
| Rack and Pinion with Power Assist |
| Tires / Wheels | |
|---|---|
| Tires : | P205/65R15 |
Recall
| Component | EXTERIOR LIGHTING:HEADLIGHTS |
|---|---|
| Manufacturer | K2 MOTOR CORPORATION |
| NHTSA Campaign ID | 08E050000 |
| Summary | K2 MOTOR IS RECALLING 1,921 AFTERMARKET HEADLAMPS OF VARIOUS MODELS SOLD FOR USE ON THE ABOVE LISTED VEHICLES. THESE HEADLAMPS ARE MISSING THE AMBER SIDE REFLEX REFLECTOR WHICH FAILS TO CONFORM WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, 'LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.' |
| Consequence | WITHOUT THE AMBER SIDE REFLEX REFLECTORS, THE LIGHTING VISIBILITY MAY BE AFFECTED, POSSIBLY RESULTING IN A VEHICLE CRASH. |
| Remedy | K2 MOTOR WILL NOTIFY OWNERS AND OFFER A FULL REFUND. THE RECALL BEGAN ON DECEMEBER 17, 2008. OWNERS MAY CONTACT K2 MOTOR AT 1-909-839-2992. |
| Notes | THIS RECALL ONLY PERTAINS TO AFTERMARKET REPLACEMENT EQUIPMENT AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON VEHICLES MANUFACTURED BY HONDA, FORD, OR CHRYSLER LLC. CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV. |
| Component | EXTERIOR LIGHTING |
|---|---|
| Manufacturer | PRO-A MOTORS, INC. |
| NHTSA Campaign ID | 06E026000 |
| Summary | CERTAIN PRO-A MOTORS CORNER LAMPS, TURN SIGNALS, AND HEADLIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT. |
| Consequence | WITHOUT THE AMBER REFLECTORS, THE VEHICLE WILL BE POORLY ILLUMINATED, POSSIBLY RESULTING IN A VEHICLE CRASH WITHOUT WARNING. |
| Remedy | PRO-A MOTORS WILL NOTIFY OWNERS AND OFFER TO REPURCHASE THE LAMPS. THE RECALL BEGAN ON APRIL 3, 2006. OWNERS MAY CONTACT PRO-A MOTORS AT 323-838-2988. |
| Notes | THIS RECALL ONLY PERTAINS TO PRO-A MOTORS AFTERMARKET LAMPS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON THE LISTED PASSENGER VEHICLES.FOR MORE INFORMATION ON THE LAMP MODEL NUMBERS, CLICK ON DOCUMENT SEARCH AND VIEW DOCUMENT TITLED 'LAMP MODEL NUMBERS.'CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV. |
| Component | EXTERIOR LIGHTING:HEADLIGHTS |
|---|---|
| Manufacturer | ANZO USA, INC. |
| NHTSA Campaign ID | 06E023000 |
| Summary | CERTAIN ANZO COMBINATION HEADLAMP ASSEMBLIES SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES. SOME COMBINATION LAMPS ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS WHICH FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, 'LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.' |
| Consequence | WITHOUT THE AMBER REFLECTORS, THE VEHICLE WILL BE POORLY ILLUMINATED, POSSIBLY RESULTING IN A VEHICLE CRASH. |
| Remedy | ANZO WILL NOTIFY OWNERS AND REPLACE THE HEADLAMPS FREE OF CHARGE. THE RECALL BEGAN MAY 9, 2006. OWNERS MAY CONTACT ANZO USA AT 909-468-3688. |
| Notes | THIS RECALL ONLY PERTAINS TO AFTERMARKET HEADLAMP ASSEMBLIES MANUFACTURED BY ANZO AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON THE LISTED PASSENGER VEHICLES.CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV. |
| Component | EXTERIOR LIGHTING:HEADLIGHTS |
|---|---|
| Manufacturer | POLI-AUTO, INC. |
| NHTSA Campaign ID | 06E025000 |
| Summary | CERTAIN POLI-AUTO COMBINATION HEADLAMP ASSEMBLIES, P/NOS. 11-728, 11-728D, 11-710, 11-419, 11-713, 11-703, 11-704, 11-708P, 11-735, 11-725, 11-726, 11-716 (P&C), 11-721-1, 11-733, 11-729, 11-730, AND 11-732, SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, 'LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.' |
| Consequence | WITHOUT THE AMBER REFLECTORS, THE VEHICLE WILL BE POORLY ILLUMINATED, POSSIBLY RESULTING IN A VEHICLE CRASH WITHOUT WARNING. |
| Remedy | POLI-AUTO WILL NOTIFY OWNERS AND OFFER TO REPURCHASE THE HEADLAMPS AT ITS ORIGINAL PURCHASE PRICE. THE RECALL IS EXPECTED TO BEGIN DURING APRIL 2006. OWNERS MAY CONTACT POLI-AUTO AT 305-477-1356. |
| Notes | CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV. |
| Component | EXTERIOR LIGHTING |
|---|---|
| Manufacturer | CK MOTORSPORT, INC. |
| NHTSA Campaign ID | 06E049000 |
| Summary | CERTAIN CK MOTORSPORTS COMBINATION HEADLIGHTS, CLEAR CORNER, BUMPER, AND SIDE MARKER LIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON THE PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT. |
| Consequence | WITHOUT THE AMBER REFLECTORS, THE VEHICLE WILL BE POORLY ILLUMINATED, POSSIBLY RESULTING IN A VEHICLE CRASH WITHOUT WARNING. |
| Remedy | CK MOTORSPORT WILL NOTIFY OWNERS AND REPLACE THE NONCOMPLIANT LAMPS FREE OF CHARGE. THE RECALL BEGAN ON JULY 1, 2006. OWNERS MAY CONTACT CK MOTORSPORT AT 1-909-610-7211. |
| Notes | THIS RECALL ONLY PERTAINS TO AFTERMARKET REPLACEMENT EQUIPMENT AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON VEHICLES MANUFACTURED BY THE VEHICLE MANUFACTURERS.FOR MORE INFORMATION ON THE LAMP MODEL NUMBERS, CLICK ON DOCUMENT SEARCH AND VIEW DOCUMENT TITLED 'LAMP MODEL NUMBERS.'CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV. |
| Component | EXTERIOR LIGHTING |
|---|---|
| Manufacturer | AAI MOTORSPORTS USA, LLC |
| NHTSA Campaign ID | 06E060000 |
| Summary | CERTAIN AAI MOTORSPORTS COMBINATION LAMPS SOLD AS REPLACEMENT LAMPS FOR USE ON THE ABOVE LIST PASSENGER VEHICLES. COMBINATION LAMPS NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, 'LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.' |
| Consequence | LACK OF AMBER SIDE REFLECTORS IN THE LAMPS WILL DECREASE LIGHTING VISIBILITY TO OTHER DRIVERS AND MAY POSSIBLY RESULT IN A VEHICLE CRASH |
| Remedy | AAI MOTORSPORTS WILL NOTIFY OWNERS AND REPLACE THE LAMPS FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 1, 2006. OWNERS MAY CONTACT AAI MOTORSPORTS AT 909-923-9188. |
| Notes | THIS RECALL ONLY PERTAINS TO AAI MOTORSPORTS AFTERMARKET LAMPS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON THE LISTED PASSENGER VEHICLES.FOR MORE INFORMATION ON THE LAMP MODEL NUMBERS, CLICK ON DOCUMENT SEARCH AND VIEW DOCUMENT TITLED 'LAMP MODEL NUMBERS.'CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV. |
| Component | EXTERIOR LIGHTING |
|---|---|
| Manufacturer | TRADESONIC |
| NHTSA Campaign ID | 06E064000 |
| Summary | CERTAIN TRADESONIC COMBINATION LAMPS SOLD AS REPLACEMENT LAMPS FOR USE ON THE ABOVE LISTED PASSENGER VEHICLES. COMBINATION LAMPS NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT. |
| Consequence | LACK OF AMBER SIDE REFLECTORS IN THE LAMPS WILL DECREASE LIGHTING VISIBILITY TO OTHER DRIVERS AND MAY POSSIBLY RESULT IN A VEHICLE CRASH. |
| Remedy | TRADESONIC WILL NOTIFY OWNERS AND REPLACE THE LAMPS FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN DURING JULY 2006. OWNERS MAY CONTACT TRADESONIC AT 626-934-8884. |
| Notes | THIS RECALL ONLY PERTAINS TO TRADESONIC AFTERMARKET LAMPS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON THE LISTED PASSENGER VEHICLES.FOR MORE INFORMATION ON THE LAMP MODEL NUMBERS, CLICK ON DOCUMENT SEARCH AND VIEW DOCUMENT TITLED 'LAMP MODEL NUMBERS.'CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV. |
| Component | AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE |
|---|---|
| Manufacturer | FORD MOTOR COMPANY |
| NHTSA Campaign ID | 01V318000 |
| Summary | EQUIPMENT DESCRIPTION: PASSENGER VEHICLES THAT HAVE HAD THE DRIVER'S AIR BAG MODULE REPLACED AFTER APRIL 5, 2000. THE REPLACEMENT DRIVER'S AIR BAG MODULE INFLATOR MAY HAVE INSUFFICIENT WELDS THAT COULD PREVENT PROPER INFLATION OF THE AIR BAG. |
| Consequence | IN THE EVENT OF A CRASH, THE DRIVER'S AIR BAG MAY NOT PROPERLY DEPLOY WHICH COULD POTENTIALLY RESULT IN LESS THAN THE INTENDED LEVEL OF OCCUPANT PROTECTION. |
| Remedy | DEALERS WILL INSPECT AND, IF NECESSARY, REPLACE THE DRIVER'S AIR BAG MODULE. OWNER NOTIFICATION BEGAN OCTOBER 5, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT FORD AT 1-866-436-7332. |
| Notes | ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236). |
| Component | STRUCTURE:BODY:HOOD |
|---|---|
| Manufacturer | FORD MOTOR COMPANY |
| Mfr Report Date | 19931004 |
| NHTSA Campaign ID | 97V180000 |
| Summary | VEHICLE DESCRIPTION: PASSENGER VEHICLES AND MINI VANS. TEARING OF THE BOND BETWEEN THE INNER AND OUTER HOOD PANELS DURING MINOR FRONT END COLLISIONS CAN RESULT IN A GAP AT THE LEADING EDGE OF THE HOOD. AIR FORCED BETWEEN THE INNER AND OUTER PANELS CAN PRODUCE ENOUGH PRESSURE TO FORCE THE OUTER PANEL UPWARD. |
| Consequence | THIS CONDITION CAN RESULT IN TOTAL SEPARATION OF THE OUTER HOOD PANEL. |
| Remedy | DEALERS WILL INSPECT THE HOOD AREA FOR ANY DAMAGE ALONG THE LEADING EDGE OF THE HOOD. IF THERE IS ANY EVIDENCE OF BOND SEPARATION, THE HOOD WILL BE REPLACED. IF THERE IS NO EVIDENCE OF BOND SEPARATION, ADDITIONAL ADHESIVE WILL BE APPLIED BETWEEN THE INNER AND OUTER HOOD PANELS. |
| Notes | OWNER NOTIFICATION BEGAN NOVEMBER 10, 1997. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT FORD AT 1-800-392-3673.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393. |
| Component | PARKING BRAKE:CONVENTIONAL |
|---|---|
| Manufacturer | FORD MOTOR COMPANY |
| Mfr Report Date | 19931004 |
| NHTSA Campaign ID | 00V349000 |
| Summary | VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH MANUAL TRANSMISSIONS. IF A VEHICLE IS PARKED WITH THE PARKING BRAKE NOT FULLY APPLIED AND NOT IN FIRST GEAR, AS DIRECTED IN THE OWNER GUIDE, AND THE SELF ADJUSTMENT PAWL SUBSEQUENTLY SKIPS ONE OR TWO TEETH, THE VEHICLE COULD MOVE ON SOME GRADES. |
| Consequence | THIS COULD RESULT IN UNINTENDED VEHICLE MOVEMENT AND A VEHICLE CRASH WITHOUT PRIOR WARNING. |
| Remedy | DEALERS WILL MODIFY THE PARKING BRAKE CONTROL AND INSTALL A PLATE OR OVER-BRACKET TO THE CONTROL TO LOCK THE SELF ADJUST MECHANISM IN POSITION FOLLOWING ADJUSTMENT. |
| Notes | OWNER NOTIFICATION BEGAN NOVEMBER 28, 2000.OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT FORD AT 1-800-392-3673.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236). |
| Component | ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN |
|---|---|
| Manufacturer | FORD MOTOR COMPANY |
| Mfr Report Date | 19940413 |
| NHTSA Campaign ID | 01V390000 |
| Summary | VEHICLE DESCRIPTION: TAURUS/SABLE VEHICLES EQUIPPED WITH 3.0L AND 3.8L ENGINES AND MUSTANG VEHICLES WITH 3.8L AND 5.0L ENGINES. IT IS POSSIBLE FOR THE ENGINE COOLING FAN BEARING TO SEIZE. |
| Consequence | SHOULD THIS OCCUR, EXCESSIVE HEAT COULD BE GENERATED WHICH COULD MELT THE FAN MOTOR ELECTRICAL CONNECTOR. COMPONENTS INSIDE THE COOLING FAN MOTOR COULD IGNITE POTENTIALLY RESULTING IN AN UNDERHOOD FIRE. |
| Remedy | DEALERS WILL INSPECT THE ENGINE COOLING FAN ASSEMBLY AND INSTALL A CIRCUIT BREAKER. IF THE COOLING FAN IS INOPERATIVE, THE FAN AND MOTOR ASSEMBLY WILL BE REPLACED. OWNER NOTIFICATION BEGAN DECEMBER 28, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT FORD AT 1-866-436-7332. |
| Notes | ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236). |
| Component | ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN |
|---|---|
| Manufacturer | FORD MOTOR COMPANY |
| Mfr Report Date | 19940413 |
| NHTSA Campaign ID | 01I011000 |
| Summary | THIS IS NOT A SAFETY RECALL IN ACCORDANCE WITH THE SAFETY ACT. HOWEVER, IT IS DEEMED A SAFETY IMPROVEMENT CAMPAIGN BY THE AGENCY. VEHICLE DESCRIPTION: 1995 TAURUS/SABLE PASSENGER VEHICLES EQUIPPED WITH 3.0L AND 3.8L ENGINES AND 1995 FORD MUSTANG VEHICLES WITH 3.8L AND 5.0L ENGINES. IT IS POSSIBLE FOR THE ENGINE COOLING FAN BEARING TO SEIZE. |
| Consequence | SHOULD THIS OCCUR, EXCESSIVE HEAT COULD BE GENERATED WHICH COULD MELT THE FAN MOTOR ELECTRICAL CONNECTOR. COMPONENTS INSIDE THE COOLING FAN MOTOR COULD IGNITE POTENTIALLY RESULTING IN AN UNDERHOOD FIRE. |
| Remedy | DEALERS WILL REPLACE THE ENGINE COOLING FAN MOTOR ASSEMBLY AT NO CHARGE TO CONSUMERS. FORD IS EXTENDING THE LIMITED WARRANTY ON THE ENGINE COOLING FAN MOTOR TO A TOTAL OF 8 YEARS OR 100,000 MILES FROM THE WARRANTY START DATE, WHICHEVER OCCURS FIRST. THIS COVERAGE IS AUTOMATICALLY TRANSFERRED TO SUBSEQUENT OWNERS AT NO CHARGE. IF THE VEHICLE ALREADY HAS MORE THAN 100,000 MILES, THIS COVERAGE WILL LAST UNTIL JUNE 30, 2002. IF THE CONSUMER HAS PAID TO HAVE THIS SERVICE DONE BEFORE DECEMBER 2001, FORD IS OFFERING A REFUND. OWNERS CAN CONTACT FORD AT 1-866-436-7332, CONCERNING THIS PROGRAM. |
| Notes | FORD HAS DECIDED TO CONDUCT A SERVICE CAMPAIGN TO REPLACE THE ENGINE COOLING FAN MOTOR ASSEMBLY. OWNERS CAN CONTACT FORD AT1-866-436-7332, CONCERNING THIS PROGRAM. |
| Component | AIR BAGS:FRONTAL |
|---|---|
| Manufacturer | FORD MOTOR COMPANY |
| Mfr Report Date | 19950101 |
| NHTSA Campaign ID | 95E006002 |
| Summary | THE PASSENGER SIDE AIR BAG HAS AN INFLATOR BODY THAT CRACKED DURING FORMING OF THE CURL THAT RETAINS THE IGNITER PLUG IN THE END OF THE INFLATOR. ALSO THE IGNITER END CAP CAN SEPARATE FROM THE INFLATOR. |
| Consequence | THE PASSENGER SIDE AIR BAG MAY NOT INFLATE PROPERLY RESULTING IN REDUCED OCCUPANT PROTECTION IN A VEHICLE ACCIDENT. IF THE IGNITER END CAP SEPARATES IN A FRONTAL COLLISION, HOT GASES CAN BE RELEASED AND IGNITE FLAMMABLE MATERIAL OR CAUSE BURN INJURIES. |
| Remedy | DEALERS WILL REMOVE AND REPLACE THE PASSENGER SIDE AIR BAG MODULE. |
| Notes | SYSTEM: INTERIOR; PASSIVE RESTRAINTS; AIR BAG; PASSENGER. VEHICLE DESCRIPTION: PASSENGER SIDE AIR BAG IN PASSENGER CARS, VANS ANDMULTI-PURPOSE VEHICLES. NOTE: IF YOUR VEHICLE IS PRESENTED TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND THE REMEDY IS NOT PROVIDED FREE OF CHARGE WITHIN A REASONABLE TIME, CONTACT FORD AT 1-800-392-3673. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393. |
| Component | STEERING:LINKAGES:TIE ROD ASSEMBLY |
|---|---|
| Manufacturer | FORD MOTOR COMPANY |
| Mfr Report Date | 19950201 |
| NHTSA Campaign ID | 95V134000 |
| Summary | THE AFFECTED VEHICLES WERE BUILT WITH OUTER TIE ROD ENDS WITH INCORRECT TAPER BALL STUDS. THE INCORRECT TAPERED BALL STUDS CAN FRACTURE WITHIN 50,000 MILES. |
| Consequence | A FRACTURED BALL STUD CAN RESULT IN A NOTICEABLE SHAKE OR SHIMMY AND COULD CAUSE THE AFFECTED WHEEL TO TUCK INWARD OR OUTWARD, INCREASING THE POTENTIAL FOR A VEHICLE ACCIDENT. |
| Remedy | DEALERS WILL INSPECT THE OUTER TIE ROD ENDS AND REPLACE THE INCORRECTLY TAPERED BALL STUDS. |
| Notes | SYSTEM: STEERING; LINKAGES; TIE ROD; END.VEHICLE DESCRIPTION: PASSENGER VEHICLES.NOTE: OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME, SHOULD CONTACT FORD AT 1-800-392-3673. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393. |
Data updated January 2023
1995 Averages
| Avg. Car Cost : | $15,500 |
| Avg. Household Income : | $35,900 |
| Avg. Home : | $113,150 |
| Avg. Gallon of Gas : | $1.10 |
| Avg. Stamp : | $0 |
| Total Car Production : | 11,985,457 |
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1995 Ford Mustang?
Q: How fast is the 1995 Ford Mustang? A: The 1995 Ford Mustang has a top speed of 131 mph. Q: What is the wheelbase size of the 1995 Ford Mustang? A: The 1995 Ford Mustang has a wheelbase size of 101.30 inches.Q: What is the length of the 1995 Ford Mustang? A: The 1995 Ford Mustang has a length of 181.50 inches.Q: What is the width of the 1995 Ford Mustang? A: The 1995 Ford Mustang has a width of 71.80 inches.Q: How much did the 1995 Ford Mustang cost when new?A: The 1995 Ford Mustang cost approximately $14,331 to $24,072 (USD) when new.Q: What were the bodystyles of the 1995 Ford Mustang? A: The 1995 Ford Mustang was offered as a Cobra Convertible, Cobra Coupe, Convertible, Coupe, GT Convertible, GT Coupe, GTS Coupe.Q: What tires did the 1995 Ford Mustang have? A: The 1995 Ford Mustang had P205/65R15 tires.Q: How many vehicles did Ford produce in 1995? A: Ford produced 1,012,818 automobiles in 1995.Q: How many 1995 Mustangs were produced? A: Ford produced 170,033 examples of the Mustang in 1995.Q: What engines did the 1995 Ford Mustang have? A: The 1995 Ford Mustang had the following engine options: V 6 (3802 cc | 232.0 cu in. | 3.8 L.) with 145 BHP (106.72 KW) @ 4000 RPM and 215 Ft-Lbs (292 NM) @ 2500 RPM V 8 (4949 cc | 302.0 cu in. | 5.0 L.) with 215 HP (158.24 KW) @ 4100 RPM and 285 Ft-Lbs (386 NM) @ 3400 RPM V 8 (4949 cc | 302.0 cu in. | 5.0 L.) with 240 BHP (176.64 KW) @ 4800 RPM and 285 Ft-Lbs (386 NM) @ 4000 RPM Q: What transmissions did the 1995 Ford Mustang have? A: The 1995 Ford Mustang had the following gearbox options: 5 speed Manual Floor shift, 4 speed Automatic with Overdrive.