conceptcarz.com

1985 BMW 325 Specifications

These are standard specifications for the 1985 BMW 325, not necessarily specifications for the vehicle(s) in the photo(s).
Engine Location : Front
Drive Type : Rear Wheel
Body / Chassis : Steel unibody
Production Years for Series : 1983 - 1991
Price : $20,975
Weight : 2715 lbs | 1231.503 kg
Inline 6
Displacement : 2687 cc | 164.0 cu in. | 2.7 L.
Power : 121 BHP (89.056 KW) @ 4250 RPM
Torque :170 Ft-Lbs (230 NM) @ 3250 RPM
Bore : 3.3 in | 84 mm.
Stroke : 3.2 in | 81 mm.
Compression : 9.0:1
Main Bearings : 7
Cylinder Block : Cast-iron
Cylinder Head : Light Alloy
Bosch electronic port fuel injection
Transmission:
5 Manual , 4 Automatic

Total BMW Production for 1985 : 87,832
1985 BMW 325
Component

VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM:HEATER CORE

Manufacturer

BAYERISCHE MOTOREN WERKE

Mfr Report Date19830101
NHTSA Campaign ID93V015000
SummaryTHE MALFUNCTION OR FAILURE OF A COOLANT SYSTEM COMPONENT RESULTS IN SIGNIFICANTLY INCREASED COOLANT TEMPERATURE AND A RESULTING INCREASE IN SYSTEM PRESSURE.
ConsequenceVEHICLES OPERATED UNDER THIS INCREASED COOLING SYSTEMPRESSURE CONDITION CAN SUFFER DAMAGE OR FAILURE OF PARTS OF THE COOLING SYSTEMSUCH AS (1) LEAKAGE FROM A COOLANT HOSE, (2) LEAKAGE OF THE RADIATOR OREXPANSION TANK, (3) DISCONNECTION OF A HOSE FROM A PIPE OR A FITTING, AND (4)CRACKS IN THE HEATER CORE END PIECE RESULTING IN COOLANT LEAKAGE. IN SOME CASES,BOILING COOLANT CAN CONTACT THE LOWER RIGHT LEG OF THE DRIVER RESULTING INBURNS. ALSO, ESCAPING COOLANT IN THE PASSENGER COMPARTMENT CAN CAUSE VAPORFOGGING OF THE INTERIOR SURFACE OF THE WINDOWS, REDUCING DRIVER VISIBILITY.
RemedyDEALERS WILL INSTALL A THERMOSTATIC BYPASS VALVE IN THE ENGINE COMPARTMENT TO CONTROL COOLANT TEMPERATURE IN THE HEATER CORE. ALSO, A NEW DESIGN RADIATOR CAP WILL BE INSTALLED, TO CONTROL PRESSURE AND PROVIDE GREATER COOLANT OVERFLOW IN THE EVENT OF OVERHEATING.
NotesSYSTEM: COOLANT SYSTEM.VEHICLE DESCRIPTION: PASSENGER CARS.

Component

STEERING: STEERING WHEEL/HANDLE BAR

Manufacturer

BAYERISCHE MOTOREN WERKE

Mfr Report Date19840901
NHTSA Campaign ID86V138000
SummaryTHE TWO PARTS OF THE STEERING COLUMN DISENGAGEMENT ELEMENT COULD COMPLETELY DISCONNECT IF THE CAR CONTACTS AN OBJECT IN THE ROADWAY OR ELSEWHERE OF SUFFICIENT MASS TO APPLY A SIGNIFICANT FORCE DIRECTLY TO THE STEERING GEARBOX. CONSEQUENCE OF DEFECT: STEERING CONTROL WOULD BE LOST.
RemedyBOLT TWO SPECIALLY FORMED PLATES TO THE DISENGAGEMENT ELEMENT SO THAT STEERING CAPABILITY WILL BE RETAINED.
NotesSYSTEM: STEERING COLUMN.VEHICLE DESCRIPTION: PASSENGER CARS.

Information provided by NHTSA
Data updated January 2023
1985 Averages
Avg. Car Cost : $9,005
Avg. Household Income : $22,100
Avg. Home : $89,330
Avg. Gallon of Gas : $1.09
Avg. Stamp : $0

Popular frequently asked questions include:

What are the dimension and mechanical specifications of the 1985 BMW 325?
How many 1985 BMW 325 were produced?
How powerful was the 1985 BMW 325? Was the 1985 BMW 325 popular? Was the 1985 BMW 325 expensive? What was the fuel economy of the 1985 BMW 325?

Q: What is the wheelbase size of the 1985 BMW 325? A: The 1985 BMW 325 has a wheelbase size of 101.20 inches.

Q: What is the length of the 1985 BMW 325? A: The 1985 BMW 325 has a length of 176.80 inches.

Q: What is the width of the 1985 BMW 325? A: The 1985 BMW 325 has a width of 64.80 inches.

Q: How much did the 1985 BMW 325 cost when new?A: The 1985 BMW 325 had a base price of approximately $20,975 (USD).

Q: What is the bodystyle of the 1985 BMW 325? A: The 1985 BMW 325 was a Sedan.

Q: How many vehicles did BMW produce in 1985? A: BMW produced 87,832 automobiles in 1985.

Q: What engine did the 1985 BMW 325 have? A: The engine powering the 1985 BMW 325 was a Inline 6 (2687 cc | 164.0 cu in. | 2.7 L.) with 121 BHP (89.056 KW) @ 4250 RPM and 170 Ft-Lbs (230 NM) @ 3250 RPM.

Q: What transmissions did the 1985 BMW 325 have? A: The 1985 BMW 325 had the following gearbox options: 5 speed Manual, 4 speed Automatic.