conceptcarz.com

2007 Ford Crown Victoria Specifications

These are standard specifications for the 2007 Ford Crown Victoria, not necessarily specifications for the vehicle(s) in the photo(s).
Engine Location : Front
Drive Type : Rear Wheel
Body / Chassis : Steel body on fully boxed frame
Production Years for Series : 2004 -
Weight : 4129 lbs | 1872.883 kg
MPG City : 17
MPG Highway : 25
Transmission:
4 Automatic

NHTSA Crash-Test Results
2007 Ford Crown Victoria 4-DR.
Frontal driver : NHTSA Safety data vehicle rating
Frontal passenger : NHTSA Safety data vehicle rating
Side driver : NHTSA Safety data vehicle rating
Side rear passenger : NHTSA Safety data vehicle rating
Rollover 2 Wheel Drive : NHTSA Safety data vehicle rating
2007 Ford Crown Victoria 4-DR. w/SAB
Frontal driver : NHTSA Safety data vehicle rating
Frontal passenger : NHTSA Safety data vehicle rating
Side driver : NHTSA Safety data vehicle rating
Side rear passenger : NHTSA Safety data vehicle rating
Rollover 2 Wheel Drive : NHTSA Safety data vehicle rating

Component

STEERING

Manufacturer

Ford Motor Company

NHTSA Campaign ID13V385000
SummaryFord is recalling certain model year 2005-2011 Ford Crown Victoria (including Crown Victoria Police Interceptors), Mercury Grand Marquis, and Lincoln Town Car vehicles. The affected vehicles are currently registered or were originally sold in Connecticut, Delaware, the District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, and Wisconsin. Severe corrosion can seize the lower intermediate shaft which may cause the upper intermediate shaft to collapse and the steering column lower bearing to separate.
ConsequenceIf the lower bearing separates, the vehicle may experience a loss of steering, increasing the risk of a crash.
RemedyFord will notify owners and dealers will replace the lower intermediate shaft, free of charge. The upper intermediate shaft and steering column lower bearing will be inspected to identify any damage that may have occurred as a result of lower intermediate shaft corrosion, and repaired or replaced as necessary. If the steering column lower bearing has separated, a retainer clip will be installed. The recall began on October 23, 2013. Owners may contact Ford at 1-866-436-7332. Ford's recall number is 13S08.
NotesA separate service campaign applies to vehicles in non-corrosion states not addressed by this safety recall. Owners of these vehicles should contact Ford directly about these vehicles.For the safety recall, owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Component

STEERING:RACK AND PINION:PINION SHAFT

Manufacturer

Ford Motor Company

Mfr Report Date20040323
NHTSA Campaign ID14V704000
SummaryFord Motor Company (Ford) is recalling certain model year 2005-2011 Ford Crown Victoria, 2005-2011 Mercury Grand Marquis vehicles manufactured March 23, 2004, to August 30, 2011, and 2005-2011 Lincoln Town Car vehicles manufactured March 8, 2004, to August 30, 2011, and on which the upper intermediate shaft was serviced during the course of safety recall 13V-385. The prior repairs may not have been correctly performed.
ConsequenceImproper servicing of the upper intermediate shaft could cause the shaft to separate, which can then result in a loss of steering control, and increasing the risk of a crash.
RemedyFord will notify the owners of vehicles whose repair records reflect that the upper intermediate steering shaft was repaired during the course of the prior recall 13V-385. Dealers will inspect and replace the upper immediate shaft if necessary free of charge. The recall began November 17, 2014. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 14S25.
NotesOwners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Component

VISIBILITY:WINDSHIELD

Manufacturer

FORD MOTOR COMPANY

Mfr Report Date20060828
NHTSA Campaign ID06V440000
SummaryCERTAIN PASSENGER VEHICLES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 212, 'WINDSHIELD MOUNTING.' THE WINDSHIELD MAY NOT BE PROPERLY SECURED TO THE VEHICLE BODY.
ConsequenceIF THE WINDSHIELD IS NOT PROPERLY RETAINED TO THE VEHICLE, WIND NOISE, SQUEAK/RATTLES AND/OR WATER LEAKS MAY OCCUR. ALSO, LOSS OF WINDSHIELD RETENTION MAY REDUCE OCCUPANT PROTECTION IN THE EVENT OF A CRASH.
RemedyDEALERS WILL REPLACE THE WINDSHIELD FREE OF CHARGE. THE RECALL BEGAN ON NOVEMBER 22, 2006. OWNERS MAY CONTACT FORD AT 1-800-392-3673.
NotesFORD RECALL NO. 06C15.CUSTOMERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO SAFERCAR.GOV.

Component

SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE

Manufacturer

FORD MOTOR COMPANY

Mfr Report Date20070330
NHTSA Campaign ID07V183000
SummaryCERTAIN PASSENGER VEHICLES EQUIPPED WITH ANTILOCK BRAKE SYSTEMS (ABS) FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 135, 'PASSENGER CAR BRAKE SYSTEMS.' THE FRONT AND REAR RIGHT SIDE BRAKE LINES MAY BE REVERSED AT THE ABS HYDRAULIC CONTROL UNIT.
ConsequenceTHE BRAKES MAY NOT OPERATE AS INTENDED, WHICH COULD RESULT IN A CRASH.
RemedyDEALERS WILL INSPECT THE BRAKE LINE CONNECTIONS AND THE HYDRAULIC CONTROL UNIT AND REPOSITION THEM FREE OF CHARGE. THE RECALLBEGAN ON APRIL 27, 2007. OWNERS MAY CONTACT FORD AT 1-800-392-3673.
NotesFORD RECALL NO. 07C16.CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV.

Information provided by NHTSA
Data updated January 2023
2007 Averages
Avg. Household Income : $50,823
Avg. Home : $313,600
Avg. Gallon of Gas : $3.38

For additional safety information and testing procedures, please visit the NHTSA website.

Popular frequently asked questions include:

What are the dimension and mechanical specifications of the 2007 Ford Crown Victoria?
How many 2007 Ford Crown Victoria were produced?
How powerful was the 2007 Ford Crown Victoria? Was the 2007 Ford Crown Victoria popular? Was the 2007 Ford Crown Victoria expensive? What was the fuel economy of the 2007 Ford Crown Victoria?

Q: What is the wheelbase size of the 2007 Ford Crown Victoria? A: The 2007 Ford Crown Victoria has a wheelbase size of 114.60 inches.

Q: What is the length of the 2007 Ford Crown Victoria? A: The 2007 Ford Crown Victoria has a length of 212.00 inches.

Q: What is the width of the 2007 Ford Crown Victoria? A: The 2007 Ford Crown Victoria has a width of 78.30 inches.

Q: How much headroom does the 2007 Ford Crown Victoria have?A: The 2007 Ford Crown Victoria has 39.50 inches of headroom.

Q: How much legroom does the 2007 Ford Crown Victoria have?A: The 2007 Ford Crown Victoria has legroom of 41.60 inches.

Q: What is the bodystyle of the 2007 Ford Crown Victoria? A: The 2007 Ford Crown Victoria was a .

Q: What transmission did the 2007 Ford Crown Victoria have? A: The 2007 Ford Crown Victoria had a 4 speed Automatic gearbox.