 |  |  |  |  |
 |  |  |  |  |
 |  |  |  |  |
 |  |  |  |  |
 |  |  |  |  |
1932 Marmon HCM V12 news, pictures, and information | ||
| Tweet | ||
 |  |  | Sedan Designer: Teague Chassis Num: DD609 |
| Sold for $891,000 at 2007 RM Auctions. High bid of $475,000 at 2011 RM Auctions. (did not sell) Sold for $407,000 at 2013 RM Auctions. | |||
The engine was an engineering marvel and the automobile was a work of art. The problem was the timing; introduced near the onset of the stock market crash and the crippling Great Depression. The most competitive market segment at this time was the upper, high priced vehicles. Packard, Auburn, Cadillac, to name a few, were produced exquisite automobiles and catering to the wealthy. The short list of buyers meant production was low and the profit margin was tight. To stay competitive the manufacturers needed to continue to introduce new products, designs, and innovative vehicles.
Cadillac and Marmon introduced their V-16 automobiles around the same time. The Great Depression meant there were few who could afford this five-thousand luxury automobile. The competition and the Depression resulted in fewer than four-hundred examples would ever be produced.
Howard Carpenter Marmon's father had worked as an Indianapolis based manufacturer of milling machinery. When Howard was old enough, he earned his degree in engineering from the University of California and later joined the family firm, eventually becoming vice president and chief engineer within three years. By 1902 he had designed his own vehicle and made it into a reality. It featured full pressure lubrication, air-colled power train with no universal joints, and had the running gear mounted on a separate subframe. In 1904 he had constructed six cars with most given unique features such as aluminum castings in their bodies. Within five years he was in full production of water-cooled cars, which he dubbed the Model 32, and would continue to produce this model for seven years. One of the Model 32's, called the 'Wasp', was entered in the inaugural Indianapolis 500 race in 1911. The car traveled the entire 500 miles in fine fashion; in modern times the race takes about 3 or 4 hours but back in 1911 it took all day and tested all elements of the car, driver, and team. At the end of the 500 mile race, it was the 'Wasp' that crossed the finish line first and outpacing the entire field.
During the 1920s, the Marmon vehicles became more conventional, though keeping to their high standards of design and construction. The problem with the Marmon's during this era were that they were bland and blended in with most other vehicles on the road; there was little to distinguish them from many of the other cars. Since Marmon catered towards the elite in society offering the highest degree of luxury, this was a problem, and sales reflected by being mediocre.
Howard Marmon began work on his V16 masterpiece in 1926. The engine would have a displacement size of 491 cubic-inches and use overhead v valves operated by pushrods. The block was made from aluminum and used wet cylinder liners. Total horsepower output from this monster was an impressive 200, which was more than adequate to carry the large and stately bodies that were to be mounted on the 145-inch wheelbase.
When Cadillac introduced their V16 engine, and with the onset of The Great Depression, Marmon felt he needed a new plan of attach in order to survive. After meeting with his former vice president and general manager, Fred Moscovics, who had moved on to Stutz, Howard created a sketch of a new vehicle. This new design would have a tubular backbone chassis similar to a Tatra, with its body and suspension mounted to the chassis. The suspension was to be independent on all four wheels, using transverse leaf springs in the front and in the rear. The setup allowed for the body to mounted low to the ground with very low unsprung weight. After some initial testing, it was decided to change the front springs to coils due to the ride being a little too uncomfortable.
The three-speed manual gearbox was mounted rigidly to the tubular backbone. Behind the transmission was an epicyclic overdrive, and was bolted rigidly to the differential housing. This setup was later abandoned due to difficulties with the lubrication system and the shifting linkage. In its place was a standard Marmon Sixteen transmission placed directly behind the engine.
He selected a V12 engine to power the car. The V12 offered more power than the eight-cylinder engine and better economy over the V16. The V12 was created by taking four cylinders from the center of the V16. The rear section was moved forward and welded to the front. The broke and stroke of the V16 was retained and there was a 45-degree angle between the banks. Traditionally, 45-degree angles do not bowed well for twelve cylinder engines in Vee configuration, but in this situation it did.
The engine was capable of producing 150 horsepower at 3700 RPM. Testing was done at the Indianapolis Motor Speedway in July of 1932 where the car was able to accelerate from 10 to 50 mph in an impressive 12.77 seconds. Top speed was achieved by race car driver Wilbur Shaw at 113 mph.
Howard Marmon used his initials, HCM, for the name of the car.
The design of the Marmon Sixteen was from a college student. The work had been contracted out to Walter Dorwin Teague Associates in New York. Oddly enough, Mr. Teague did not enjoy automobiles so he assigned the project to his son, Walter Dorwin Teague, Jr., who was a car enthusiasts and a student at M.I.T. The design was elegant and it brought about the slogan 'The World's Most Advanced Motor Car.'
After Dorwin's initial experience with successfully designing an automobile, he began creating what he called, 'what a car really should look like.' He created a 1/10-scale model that had influences from a Stutz Blackhawk and from French cars such as the Renault. The model was in the Teague design office when Howard Marmon visited the firm to discuss the new project. When he saw the design, he was impressed. He sent a set of chassis drawings to Teague to get the project underway. Many of Dorwin Teague's initial designs were retained but there were several improvements along the way. The cabin was moved slightly forward and the trunk was reworked, to some degree. The design retained the four-passenger coupe layout. New drawings of the car by Teague featured headlamps set into the fenders which was in the style of Pierce-Arrow. This, and the addition of the hood ornament, was not to Howard Marmon's liking.
The total production costs of the car were taken care of by Howard Marmon himself. It is estimated that those expenses were in the neighborhood of $160,000. The project was completed in 1933, the same time the Company had entered receivership. The car was taken on a national tour in attempts to stimulate interest in its production by any major automobile manufacturer. No one seemed interested.
The car passed through ownership throughout the years, coming into the care of its last owner in 1999. A restoration was commissioned on the car, bringing it back to its original condition. Dorwin Teague, the designer of the car, gave input during the restoration. Teague had never seen the car, but an opportunity presented itself when the restoration was completed and the car was shown at the 2001 Pebble Beach Concours d'Elegance. At the concours, it was given a perfect score and was awarded Best in Class.
This rare prototype car is a very historically significant automobile and demonstrates the direction the Marmon Company may have gone, had they stayed in business. It is a modest car with several unique design features. It is elegant, refined, and an engineering masterpiece.
This car was offered for sale at the 2007 RM Auctions held at Meadow Brook. This was only the second time in the cars history that it was offered for sale. During its history it has passed through several ownerships, but during those times it was a gift or a trade. The 368 cubic-inch overhead valve engine is constructed from aluminum and capable of producing 151 horsepower. There is a three speed- manual gearbox and four-wheel mechanical drum brakes. The wheelbase measures 134-inches with its body suspended in place by an independent suspension. The car was the highlight of the show and estimated to bring in the highest dollar figure of the day, which it did. The estimates had been set at between $1,000,000 - $1,250,000. It is a car that has a very recent restoration with no flaws or shortcomings. Its history is complete and known, and it can rival for Best in Show at nearly any concours where it is entered.
At auction, there was interest in the car but not to the degree as anticipated. Since it has not been sold in 75 years, trying to figure out its value is difficult. Bidding slowed around the $800,000 mark. It took a little persuasion, possibly coaching, by Rob Myers for the final bid to be placed. The high bid, after buyers premium, was $891,000.
By Daniel Vaughan | Jun 2008
| Auctions America's 2013 Auburn Spring Event Offers Ultimate Collector Car Weekend | |
 | • Auctions America presents the first of two annual Auburn sales, May 9 – 11 at historic Auburn Auction Park in Auburn, Indiana • Multi-day sale lifts gavel on 600 quality collector cars and an assortment of memorabilia • Notable early highlights include selection of Hudsons from the respected John Soneff Collection • Weekend also features inaugural Antique Automobile Club of America Central Division National Spring Meet, and an extensive car corral and swap meet presented by Carlisle Events...[Read more...] |
| Magnificent Series of Coachbuilt Classics To Grace RM's Amelia Island Concours D'Elegance Sale | |
 | • RM Auctions returns as the official auction house of the Amelia Island Concours d'Elegance, March 9, 2013 • Single-day sale features breathtaking roster of more than 80 investment-quality collector cars • Notable highlights include an outstanding series of coachbuilt classics headlined by a multi-million-dollar 1935 Duesenberg Model SJ Walker-LaGrande Convertible Coupe and a trio of Cords from the personal collection of Jim Fasnacht • Frequently updated list of entries available online at r...[Read more...] |
| Mercedes-Benz Classic at the 2012 Grossglockner Grand Prix | |
 | • Revival of the mountain race from the 1930s • Mercedes-Benz SSK and W 125 at the start • 92 bends, 14 hairpins, 15 kilometres and a 1300-metre altitude difference The Grossglockner mountain race was one of the most prestigious motor sports events of the 1930s. This year it will be revived with the 2012 Grossglockner Grand Prix to be held from 20 to 22 September 2012 and Mercedes-Benz will be there with some famous cars. In 1938, the brand took part for the first time. As a classic c...[Read more...] |
| The Champion in Touring Car Racing : The BMW M3 | |
 | In August 1985, a rumour surfaced in motor magazine Auto-Deutschland which emanated from a new sports car. An A Group Car from BMW that was a thoroughbred racing car according to the rules but was also to be produced in a version licensed to drive on open roads for everyday use. Speculation about this dream car that could take to normal roads and was intended for the 'Most dynamic among BMW 3 Series drivers' was right on target. But the pundits missed the mark about the motor-sport car by a mile...[Read more...] |
| Auctions America By RM's 2012 Auburn Spring Auction | |
 | 'Variety' is the buzzword for this year's Auctions America by RM June 1-3 Auburn Spring auction, which will offer a huge range of collector vehicles and an enormous private collection of automotive memorabilia. More than 600 American muscle cars, Classics, foreign sports cars and hot rods will cross the block at the historic Auburn Auction Park, the company's national headquarters in Auburn, Indiana. 'Last year was our first spring event at the park,' said Auctions America by RM's President ...[Read more...] |
1932| Model 34 Model 74 Model E-75 Sixteen |
© 1998-2012. All rights reserved. The material may not be published, broadcast, rewritten, or redistributed.
