1972 Stratos HF  |
 |  |  |  |  |
 |  |  |  |  |
 |  |  |  |
1971 Lancia Stratos HF Prototype news, pictures, and information | ||
| Tweet | ||
 |  |  | Coupe Designer: Bertone Chassis Num: 1240 |
The Lancia Stratos HF Prototype was a clandestine project done by the legendary design-studio, Bertone, and constructed from parts off a used Lancia Fulvia. The front-engined car was converted to an exotic mid-engine layout with power produced from the engine sent to the rear wheels. The wedge-shaped exterior bodyshell was penned by Marcello Gandini with an overall height of just-over 42-inches.
This project was done independent of Lancia. When the car was shown at the Turin Motorshow, it was easily a highlight. Cesare Fiorio, the competition manager for Lancia, apparently walked passed the vehicle on several occasions. Obviously, the Lancia personnel were impressed, but did not offer any contracts to Bertone, nor did they initiate conversation. After the show, Bertone tried to set-up meetings but Lancia was not interested. Undeterred, Bertone drove the concept to the Lancia factory. It was short enough to pass under the security gate and enter the premises. Bertone finally had the attention he wanted and his persistence was rewarded with a contract from Lancia.
Bertone, along with help from Fiorio, was commissioned to further develop the car into a Group 4 rally car. Gandini created a new design that drew heavily upon the concept car. It was given a monocoque chassis and fitted by Lancia with a four-cylinder engine from a Fulvia. The engine was later scrapped and development began on a proper powerplant.
The second prototype, the Stratos Zero, was completed in just four months and painted in an eye-catching DayGlo florescent red. It was shown at the 1971 Turin Show and later Geneva in non-functional form as its engine had not been completed. The engine would take very long to complete resulting in Lancia scrapping it in favor of a Ferrari unit.
The car was put through rigorous testing which, after several revisions, was a well-tuned machine. The double wishbone suspension was swapped in favor of a McPherson strut setup on the production cars. Also, instead of aluminum, the body was formed from fiberglass.
Design and development took three years, meaning the assembly of the production version did not start until 1973. The cars were assembled quickly in order to comply with the necessary 400 examples to qualify for Group 4 homologation. The racing version of the Stratos were given a heavily-modified engine which raised the base 190 horsepower to 280 bhp. The body was modified to distinguish it from its road-going sibling.
The Stratos, which had been racing in the Group 5 class, was cleared for racing in Group 4 competition midway through 1974. The cars were very successful for both privateers and the works team. The cars would win seventeen World Rally Championship victories during their career, with the first victory earned by Sandro Munari.
Production of the Stratos lasted from 1973 through 1978 with nearly 500 examples built. 50 examples were competition cars.
By Daniel Vaughan | Oct 2008
This project was done independent of Lancia. When the car was shown at the Turin Motorshow, it was easily a highlight. Cesare Fiorio, the competition manager for Lancia, apparently walked passed the vehicle on several occasions. Obviously, the Lancia personnel were impressed, but did not offer any contracts to Bertone, nor did they initiate conversation. After the show, Bertone tried to set-up meetings but Lancia was not interested. Undeterred, Bertone drove the concept to the Lancia factory. It was short enough to pass under the security gate and enter the premises. Bertone finally had the attention he wanted and his persistence was rewarded with a contract from Lancia.
Bertone, along with help from Fiorio, was commissioned to further develop the car into a Group 4 rally car. Gandini created a new design that drew heavily upon the concept car. It was given a monocoque chassis and fitted by Lancia with a four-cylinder engine from a Fulvia. The engine was later scrapped and development began on a proper powerplant.
The second prototype, the Stratos Zero, was completed in just four months and painted in an eye-catching DayGlo florescent red. It was shown at the 1971 Turin Show and later Geneva in non-functional form as its engine had not been completed. The engine would take very long to complete resulting in Lancia scrapping it in favor of a Ferrari unit.
The car was put through rigorous testing which, after several revisions, was a well-tuned machine. The double wishbone suspension was swapped in favor of a McPherson strut setup on the production cars. Also, instead of aluminum, the body was formed from fiberglass.
Design and development took three years, meaning the assembly of the production version did not start until 1973. The cars were assembled quickly in order to comply with the necessary 400 examples to qualify for Group 4 homologation. The racing version of the Stratos were given a heavily-modified engine which raised the base 190 horsepower to 280 bhp. The body was modified to distinguish it from its road-going sibling.
The Stratos, which had been racing in the Group 5 class, was cleared for racing in Group 4 competition midway through 1974. The cars were very successful for both privateers and the works team. The cars would win seventeen World Rally Championship victories during their career, with the first victory earned by Sandro Munari.
Production of the Stratos lasted from 1973 through 1978 with nearly 500 examples built. 50 examples were competition cars.
By Daniel Vaughan | Oct 2008
The Betone designed Stratos was built for one purpose, to win the World Rally Championship. Two prototype versions of the Stratos were shown, one during the 1970 Turin Motor Show and another a year later. The road going versions of this car was built only to satisfy the homologation rules. As a result, the road version had noisy cockpits, was uncomfortable, and did not have good cabin air circulation. The front part of the car housed cooling fans and a spare tire. So it was not very practical when it came to luggage.
In 1973, the Stratos won its first rally it participated in. In 1974 through 1976 it dominated the rally scene by capturing the World Championship.
Since Lancia was owned by Fiat, who also owned Ferrari, there was a wealth of resources to draw from. And such, a Ferrari Dino V6 quad cam engine was used and placed in the rear of the car. The engine was capable of producing almost 200 horsepower which could propel the car from zero to sixty mph in just 7 seconds. A five speed manual gear box and 9.9 inch vented disc brakes were also used.
The body was built by Bertone and light-weight fiberglass was used whenever possible.
The rear spoiler provided down force and channeled air into the engine ducts. If the vehicle rolled-over the spoiler was actually strong enough to take the impact of the tumble.
In 1973, the Stratos won its first rally it participated in. In 1974 through 1976 it dominated the rally scene by capturing the World Championship.
Since Lancia was owned by Fiat, who also owned Ferrari, there was a wealth of resources to draw from. And such, a Ferrari Dino V6 quad cam engine was used and placed in the rear of the car. The engine was capable of producing almost 200 horsepower which could propel the car from zero to sixty mph in just 7 seconds. A five speed manual gear box and 9.9 inch vented disc brakes were also used.
The body was built by Bertone and light-weight fiberglass was used whenever possible.
The rear spoiler provided down force and channeled air into the engine ducts. If the vehicle rolled-over the spoiler was actually strong enough to take the impact of the tumble.
A big success by any standard both in and out of competition, the Lancia Stratos was developed as a homologation Special for European rallying. After production ceased it became a cult car and is now highly priced as the ‘modern classis' it is. Conceived strictly for rallying, the Lancia Stratos however makes an exciting road car, though it is very far from GT standards in both luxury and refinement.
The concept vehicle responsible for providing the inspiration for the Lancia Stratos Rally car is the Lancia (Bertone) Stratos. The Stratos featured a 1584 cc V4 DOHC with 115 bhp horsepower at 200 rpm. Designed by Marcello Gandini, the same designer responsible for the Lamborghini Countach and Lamborghini Miura, the Stratos concept was a development of the Bertone designed Alfa Romeo Carabo concept from 1968. The Carabo concept was also a Gandini creation.
First revealed at the Turin Motor Show in October of 1970, the Lancia Stratos HF prototype was a styling exercise for Bertone. A futuristic design, the Stratos featured a wedge shaped profile that stood just 33 inches from the ground. Since the vehicle was so low, conventional doors could not be used and instead one accessed the interior of the Stratos by a hinged windscreen. Drivers had to flip up the windscreen and walk into the vehicle. Once inside, visibility was quite restricted since the front windscreen was narrow. The cockpit of the Lancia Stratos was designed specifically for fast forest flying.
The body design was predictably minimal to hold down weight and bulk with its most distinctive features being semi-concealed A-pillars and a door beltline that sharply upswept to the top of the daylight opening. The shape of the resulting unbroken expanse of glass gave the tunnelback roof the appearance of a futuristic crash helmet.
The main body structure was steel, like the chassis, and weight-saving fiberglass was used for tilt-up nose and tail sections. A small box above and behind the powertrain was where cargo space was held. Bins were also molded into the interior door panels for storing helmets.
The same engine utilized on the Lancia 1600 HF Fulvia was used on the Bertone designed Lancia Stratos Zero prototype. A triangular shaped panel hinged upwards to allow access to the mid-mounted engine. Developed for rallying purposes, the legendary Lancia Stratos was unveiled in 1974. The production vehicle Stratos was powered by a 2.4 liter mid-mounted V6 from the Ferrari Dino.
Like no other Lancia before or after, the Lancia Stratos was a shock that left enthusiasts and rally fans breathless. For almost a decade the Stratos streaked across the rally landscape much like a brilliant comet, while discarding past principles, it also fearlessly represented something undeniably new. A phenomenal rally car, the Lancia Stratos set an example to every other car manufacturer in the world. The first viable purpose-built rally car ever built, the Stratos was probably the last purpose-built rally car.
Created by the Bertone coachbuilding company, the Stratos was both radical, yet fully functional. Fiorio realized that for Lancia to continue to compete in the World Rally Championship, the Fulvia HF would need a much more powerful replacement. A the time, four-wheel drive was not an option, so a mid-engined configuration seemed ideal. To reinforce Fiori's convictions, the Bertone show car was featured soon after with a mid-engine Fulvia V4.
The introduction of the Ford mid-engine purpose-built GT70 rally car at the 1971Brussels Motor Show was what truly inspired the impetus behind the Stratos proect. It was after this appearance that Lancia's general manager, Pierugo Gobbato contacted Nuccio Bertone. Though the GT70 was actually never put in production by Ford, it was this that sparked the inspiration of the Lancia Stratos.
As always, there was a minimum production requirement, 500 units for the Lancia Stratos. This was an awkward figure that would necessitate funds for at least semi-permanent tooling as well as design and development. This was a job well suited to the Italian industry. Fiorio masterminded the project, and he envisioned a short, wide coupe with transverse midships drivetrain. Bertone was immediately contracted to style the vehicle and built its unit body/chassis structure.
43 months passed in between the time of conception to the actual birth of the Lancia Stratos. The vehicle was developed to take over and make Lancia the outright world rally champ. The Stratos was both short and wide, with a wheelbase of only 7 feet 1.8 inches, the width of the vehicle was only 5 feet 8.9 inches. Weighing only 1958 lbs, the Stratos was only 3 feet 7.9 inches high. Able to easily exceed 140 mph, the Stratos featured 190 horsepower in roadgoing trim.
Having studied every possible powerteam in the Fiat/Lancia group, Fiorio secured 2.4 liter V-6s and 5-speed transaxles from Ferrari, which was an ideal chouse as they'd be installed exactly as the Dino 246. All-independent suspension, rack-and-pinion steering and four-wheel disc brakes were all specifically designed for the Lancia Stratos.
After 1978 the Stratos was officially retired and no longer was officially entered by the Lancia factory, the vehicle was still going strong. The Lancia team was headed by by Sandro Munari who won its first event as a homologated entry in October of 1974. Mun ari entered alone 40 events with the Lancia Stratos and won 14. The Stratos also won the World Rally Championship in 1974, 1975, and 1976 and remained competitive for another four years. The final major win came in 1979 when a Lancia Stratos entered by the Monaco importer won the famed Monte Carlo Rally. Finally the factory retired the Stratos.By Jessica Donaldson
For more information and related vehicles, click hereThe concept vehicle responsible for providing the inspiration for the Lancia Stratos Rally car is the Lancia (Bertone) Stratos. The Stratos featured a 1584 cc V4 DOHC with 115 bhp horsepower at 200 rpm. Designed by Marcello Gandini, the same designer responsible for the Lamborghini Countach and Lamborghini Miura, the Stratos concept was a development of the Bertone designed Alfa Romeo Carabo concept from 1968. The Carabo concept was also a Gandini creation.
First revealed at the Turin Motor Show in October of 1970, the Lancia Stratos HF prototype was a styling exercise for Bertone. A futuristic design, the Stratos featured a wedge shaped profile that stood just 33 inches from the ground. Since the vehicle was so low, conventional doors could not be used and instead one accessed the interior of the Stratos by a hinged windscreen. Drivers had to flip up the windscreen and walk into the vehicle. Once inside, visibility was quite restricted since the front windscreen was narrow. The cockpit of the Lancia Stratos was designed specifically for fast forest flying.
The body design was predictably minimal to hold down weight and bulk with its most distinctive features being semi-concealed A-pillars and a door beltline that sharply upswept to the top of the daylight opening. The shape of the resulting unbroken expanse of glass gave the tunnelback roof the appearance of a futuristic crash helmet.
The main body structure was steel, like the chassis, and weight-saving fiberglass was used for tilt-up nose and tail sections. A small box above and behind the powertrain was where cargo space was held. Bins were also molded into the interior door panels for storing helmets.
The same engine utilized on the Lancia 1600 HF Fulvia was used on the Bertone designed Lancia Stratos Zero prototype. A triangular shaped panel hinged upwards to allow access to the mid-mounted engine. Developed for rallying purposes, the legendary Lancia Stratos was unveiled in 1974. The production vehicle Stratos was powered by a 2.4 liter mid-mounted V6 from the Ferrari Dino.
Like no other Lancia before or after, the Lancia Stratos was a shock that left enthusiasts and rally fans breathless. For almost a decade the Stratos streaked across the rally landscape much like a brilliant comet, while discarding past principles, it also fearlessly represented something undeniably new. A phenomenal rally car, the Lancia Stratos set an example to every other car manufacturer in the world. The first viable purpose-built rally car ever built, the Stratos was probably the last purpose-built rally car.
Created by the Bertone coachbuilding company, the Stratos was both radical, yet fully functional. Fiorio realized that for Lancia to continue to compete in the World Rally Championship, the Fulvia HF would need a much more powerful replacement. A the time, four-wheel drive was not an option, so a mid-engined configuration seemed ideal. To reinforce Fiori's convictions, the Bertone show car was featured soon after with a mid-engine Fulvia V4.
The introduction of the Ford mid-engine purpose-built GT70 rally car at the 1971Brussels Motor Show was what truly inspired the impetus behind the Stratos proect. It was after this appearance that Lancia's general manager, Pierugo Gobbato contacted Nuccio Bertone. Though the GT70 was actually never put in production by Ford, it was this that sparked the inspiration of the Lancia Stratos.
As always, there was a minimum production requirement, 500 units for the Lancia Stratos. This was an awkward figure that would necessitate funds for at least semi-permanent tooling as well as design and development. This was a job well suited to the Italian industry. Fiorio masterminded the project, and he envisioned a short, wide coupe with transverse midships drivetrain. Bertone was immediately contracted to style the vehicle and built its unit body/chassis structure.
43 months passed in between the time of conception to the actual birth of the Lancia Stratos. The vehicle was developed to take over and make Lancia the outright world rally champ. The Stratos was both short and wide, with a wheelbase of only 7 feet 1.8 inches, the width of the vehicle was only 5 feet 8.9 inches. Weighing only 1958 lbs, the Stratos was only 3 feet 7.9 inches high. Able to easily exceed 140 mph, the Stratos featured 190 horsepower in roadgoing trim.
Having studied every possible powerteam in the Fiat/Lancia group, Fiorio secured 2.4 liter V-6s and 5-speed transaxles from Ferrari, which was an ideal chouse as they'd be installed exactly as the Dino 246. All-independent suspension, rack-and-pinion steering and four-wheel disc brakes were all specifically designed for the Lancia Stratos.
After 1978 the Stratos was officially retired and no longer was officially entered by the Lancia factory, the vehicle was still going strong. The Lancia team was headed by by Sandro Munari who won its first event as a homologated entry in October of 1974. Mun ari entered alone 40 events with the Lancia Stratos and won 14. The Stratos also won the World Rally Championship in 1974, 1975, and 1976 and remained competitive for another four years. The final major win came in 1979 when a Lancia Stratos entered by the Monaco importer won the famed Monte Carlo Rally. Finally the factory retired the Stratos.By Jessica Donaldson
| GRAVEL, ALTITUDE, HEAT: VOLKSWAGEN POLO R WRC MAKES MEXICAN DEBUT | |
 | ¡Viva México! The Volkswagen Polo R WRC is just a matter of days away from its much-anticipated competitive debut on gravel in the FIA World Rally Championship. The 315 hp four-wheel drive powerhouse from Wolfsburg will take on very specific conditions when it rolls down the starting ramp at the third round of the season, the Rally Mexico, from 7th to 10th March. Reaching altitudes of up to 2,700 metres above sea level, the special stages are the highest the teams will face all season – a true c...[Read more...] |
| 12C SPIDER TO MAKE ITALIAN PREMIERE AT THE 37TH BOLOGNA MOTOR SHOW | |
 | •Italian debut of the 12C Spider – new Spider version of highly acclaimed 12C •Developed alongside 12C as a 'pure McLaren' – including revised 625PS 3.8-litre V8 twin-turbo engine •Carbon fibre MonoCell ensures class-leading rigidity, handling and safety •Fully automatic two-piece Retractable Hard Top (RHT) can be raised or lowered in less than 17 seconds and on the move up to 30 km/h •Official retail location represented by Gruppo Fassina at McLaren Milan The innovative new McLaren ...[Read more...] |
| The 2012 Rally America Championship Ends In A Cloud of Dust At Olympus Rally | |
 | With the 2012 Rally America Driver's Championship mathematically in his favor for a second year in a row, Subaru Rally Team USA (SRT USA) driver David Higgins entered the Olympus Rally season finale with an aim to put on a show for the fans and go for the win. Unfortunately, neither goal would materialize due to extreme drought conditions in the area, placing the rally's forest stages off-limits to fans due to fire danger and creating blinding dust for Higgins and the bulk of the field. Higgin...[Read more...] |
| 1967 Can-Am Road America: The Beginning of the 'Bruce and Denny Show' | |
 | While Formula One will be forever considered the pinnacle of motorsport, from a period between 1966 and 1986 there existed a series that would likely be the closest to 'anything goes' as any motor racing series could truly get. Based upon the FIA Group 7 cars but allowed to showcase unlimited engine sizes and unfettered aerodynamics, the Can-Am cars would have to be considered the pinnacle of motorsport technology and power of their era. And for more than a couple of years there would be one tea...[Read more...] |
| The Champion in Touring Car Racing : The BMW M3 | |
 | In August 1985, a rumour surfaced in motor magazine Auto-Deutschland which emanated from a new sports car. An A Group Car from BMW that was a thoroughbred racing car according to the rules but was also to be produced in a version licensed to drive on open roads for everyday use. Speculation about this dream car that could take to normal roads and was intended for the 'Most dynamic among BMW 3 Series drivers' was right on target. But the pundits missed the mark about the motor-sport car by a mile...[Read more...] |
 1971
Lancia
models |
| Lancia Fulvia | 1971 Lancia Concepts |
| Lancia Stratos |
| Similar Automakers | |
| Alfa Romeo | Citroen |
| Fiat | Morgan |
| Opel | Peugeot |
| Renault | Seat |
| Skoda | Vauxhall |
| Similarly Sized Vehicles from 1971 |
| Aston Martin DB6 |
| BMW 1800 |
| Chevrolet Vega Series |
| Ferrari Dino 246 |
| Fiat 850 |
| Lancia Stratos |
| Toyota Crown |
| TVR Tuscan |
| Volvo 1800E |
| Lancia: 1971-1980 |
| Similar Automakers |
| Other models by Lancia |
| Related Articles and Event Coverage |
| 58th Annual Pebble Beach Concours d'Elegance |
| Appia Aprilia Artena | Astura Augusta Aurelia | Beta D50 Dedra | Dilambda Flaminia Flavia | Fulvia Hyena Lambda | Scorpion Stratos Thema | Theta |
| 1972 Stratos HF |
