These are standard specifications for the 1976 Dodge Monaco, not necessarily specifications for the vehicle(s) in the photo(s).
Transmission:
3 Automatic
Information provided by NHTSA
Data updated January 2023
Features
Engine Location : | Front |
Drive Type : | Rear Wheel |
Body / Chassis : | Unibody |
Production Years for Series : | 1965 - 1978 |
Price : | $4,380-$5,870 |
Weight : | 4160 lbs | 1886.944 kg |
Engine & Transmission
V 8 90-degree | |
---|---|
Displacement : | 5211 cc | 318.0 cu in. | 5.2 L. |
Power : | 150 BHP (110.4 KW) @ 4000 RPM |
Torque : | 255 Ft-Lbs (346 NM) @ 1600 RPM |
Bore : | 3.9 in | 99 mm. |
Stroke : | 3.3 in | 84 mm. |
Compression : | 8.5:1 |
Main Bearings : | 5 |
Valvetrain : | 16 OHV (2 valves per cylinder) |
Construction : | Cast-iron block and head |
V 8 90-degree | |
---|---|
Displacement : | 5899 cc | 360.0 cu in. | 5.9 L. |
Power : | 170 HP (125.12 KW) @ 4000 RPM |
Torque : | 280 Ft-Lbs (380 NM) @ 2400 RPM |
Bore : | 4.0 in | 102 mm. |
Stroke : | 3.6 in | 91 mm. |
Compression : | 8.4:1 |
Main Bearings : | 5 |
Valvetrain : | 16 OHV (2 valves per cylinder) |
Construction : | Cast-iron block and head |
Holley 2-barrel carburetor |
V 8 90-degree | |
---|---|
Displacement : | 5899 cc | 360.0 cu in. | 5.9 L. |
Power : | 175 HP (128.8 KW) @ 4000 RPM |
Torque : | 280 Ft-Lbs (380 NM) @ 2400 RPM |
Bore : | 4.0 in | 102 mm. |
Stroke : | 3.6 in | 91 mm. |
Compression : | 8.4:1 |
Main Bearings : | 5 |
Valvetrain : | 16 OHV (2 valves per cylinder) |
Construction : | Cast-iron block and head |
1 4-barrel carburetor |
V 8 90-degree | |
---|---|
Displacement : | 6555 cc | 400.0 cu in. | 6.6 L. |
Power : | 175 HP (128.8 KW) @ 4000 RPM |
Torque : | 300 Ft-Lbs (407 NM) @ 2400 RPM |
Bore : | 4.4 in | 111 mm. |
Stroke : | 3.4 in | 86 mm. |
Compression : | 8.2:1 |
Main Bearings : | 5 |
Construction : | Cast-iron block and head |
V 8 90-degree | |
---|---|
Displacement : | 6555 cc | 400.0 cu in. | 6.6 L. |
Power : | 185 HP (136.16 KW) @ 3600 RPM |
Torque : | 285 Ft-Lbs (386 NM) @ 3200 RPM |
Bore : | 4.4 in | 111 mm. |
Stroke : | 3.4 in | 86 mm. |
Compression : | 8.2:1 |
Main Bearings : | 5 |
Construction : | Cast-iron block and head |
Carter 4-barrel carburetor |
V 8 | |
---|---|
Displacement : | 7210 cc | 440.0 cu in. | 7.2 L. |
Power : | 205 HP (150.88 KW) @ 3600 RPM |
Torque : | 320 Ft-Lbs (434 NM) @ 2000 RPM |
Bore : | 4.3 in | 110 mm. |
Stroke : | 3.8 in | 95 mm. |
Compression : | 8.2:1 |
Main Bearings : | 5 |
Construction : | Cast-iron block and head |
Carter 4-barrel carburetor |
V 8 90-degree | |
---|---|
Displacement : | 6555 cc | 400.0 cu in. | 6.6 L. |
Power : | 210 HP (154.56 KW) @ 4400 RPM |
Torque : | 305 Ft-Lbs (414 NM) @ 3200 RPM |
Bore : | 4.4 in | 111 mm. |
Stroke : | 3.4 in | 86 mm. |
Compression : | 8.2:1 |
Main Bearings : | 5 |
Construction : | Cast-iron block and head |
Carter 4-barrel carburetor |
V 8 90-degree | |
---|---|
Displacement : | 6555 cc | 400.0 cu in. | 6.6 L. |
Power : | 240 HP (176.64 KW) @ 4400 RPM |
Torque : | 325 Ft-Lbs (441 NM) @ 3200 RPM |
Bore : | 4.4 in | 111 mm. |
Stroke : | 3.4 in | 86 mm. |
Compression : | 8.2:1 |
Main Bearings : | 5 |
Construction : | Cast-iron block and head |
Carter 4-barrel carburetor |
3 Automatic
Gear Ratios
1st Gear : | 2.45:1 |
2nd Gear : | 1.45:1 |
3rd Gear : | 1.00:1 |
Production Figures
Total Dodge Production for 1976 : | 430,641 |
1976 Dodge Monaco | |
Royal Brougham Formal Hardtop 2 dr. 6 P : | 2,742 |
Royal Brougham Sedan 4 dr. 6 P : | 3,890 |
Royal Brougham Three-Seater Wagon 4 dr. 9 P : | 1,873 |
Royal Hardtop Coupe 2 dr. 6 P : | 1,591 |
Royal Sedan 4 dr. 6 P : | 9,049 |
Royal Station wagon 4 dr. 6 P : | 547 |
Royal Three Seater Station Wagon 4 dr. 9 P : | 1,006 |
Sedan 4 dr. 6 P : | 3,686 |
Station Wagon 4 dr. 6 P : | 597 |
Handling
Recall
Component | FUEL SYSTEM, GASOLINE:CARBURETOR SYSTEM |
---|---|
Manufacturer | CHRYSLER CORPORATION |
Mfr Report Date | 19740801 |
NHTSA Campaign ID | 78V020000 |
Summary | WHEN THE ACCELERATOR PEDAL ON THE INVOLVED VEHICLES IS DEPRESSED AND THE ACCELERATOR PUMP IS ACTIVATED, A DISTORTED ACCELERATOR PUMP SEAL IN THE CARBURETOR MAY PREVENT THE PUMP FROM DELIVERING THE PROPER AMOUNT OF FUEL. |
Remedy | DEALER WILL REPLACE THE CARBURETOR ACCELERATOR PUMP SEAL WITH A SEAL OF IMPROVED DISTORTION RESISTANCE. THE CARBURETOR WILL ALSO BE CHECKED FOR THE PROPER FLOAT LEVEL. |
Notes | VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH 225 OR 318 CID ENGINES.SYSTEM: FUEL; CARBURETOR ACCELERATOR PUMP SEAL.CONSEQUENCES OF DEFECT: THIS MAY RESULT IN HESITATION OR LACK OF RESPONSE WHENDRIVER ATTEMPTS TO ACCELERATE. ENGINE STALLING MAY OCCUR IN SOME CASES; THISCOULD LEAD TO A VEHICLE ACCIDENT IN CERTAIN TRAFFIC SITUATIONS. |
Data updated January 2023
1976 Averages
Avg. Car Cost : | $1 |
Avg. Household Income : | $16,000 |
Avg. Home : | $43,400 |
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1976 Dodge Monaco?
Q: What is the wheelbase size of the 1976 Dodge Monaco? A: The 1976 Dodge Monaco has wheelbase sizes of 121.50 and 124.00 inches.Q: What is the length of the 1976 Dodge Monaco? A: The 1976 Dodge Monaco has lengths of 225.70 and 229.50 inches.Q: What is the width of the 1976 Dodge Monaco? A: The 1976 Dodge Monaco has a width of 79.40 inches.Q: How much did the 1976 Dodge Monaco cost when new?A: The 1976 Dodge Monaco cost approximately $4,380 to $5,870 (USD) when new.Q: What were the bodystyles of the 1976 Dodge Monaco? A: The 1976 Dodge Monaco was offered as a Royal Brougham Formal Hardtop, Royal Brougham Sedan, Royal Brougham Three-Seater Wagon, Royal Hardtop Coupe, Royal Sedan, Royal Station wagon, Royal Three Seater Station Wagon, Sedan, Station Wagon.Q: How many vehicles did Dodge produce in 1976? A: Dodge produced 430,641 automobiles in 1976.Q: What engines did the 1976 Dodge Monaco have? A: The 1976 Dodge Monaco had the following engine options: V 8 (5211 cc | 318.0 cu in. | 5.2 L.) with 150 BHP (110.4 KW) @ 4000 RPM and 255 Ft-Lbs (346 NM) @ 1600 RPM V 8 (5899 cc | 360.0 cu in. | 5.9 L.) with 170 HP (125.12 KW) @ 4000 RPM and 280 Ft-Lbs (380 NM) @ 2400 RPM V 8 (5899 cc | 360.0 cu in. | 5.9 L.) with 175 HP (128.8 KW) @ 4000 RPM and 280 Ft-Lbs (380 NM) @ 2400 RPM V 8 (6555 cc | 400.0 cu in. | 6.6 L.) with 175 HP (128.8 KW) @ 4000 RPM and 300 Ft-Lbs (407 NM) @ 2400 RPM V 8 (6555 cc | 400.0 cu in. | 6.6 L.) with 185 HP (136.16 KW) @ 3600 RPM and 285 Ft-Lbs (386 NM) @ 3200 RPM V 8 (7210 cc | 440.0 cu in. | 7.2 L.) with 205 HP (150.88 KW) @ 3600 RPM and 320 Ft-Lbs (434 NM) @ 2000 RPM V 8 (6555 cc | 400.0 cu in. | 6.6 L.) with 210 HP (154.56 KW) @ 4400 RPM and 305 Ft-Lbs (414 NM) @ 3200 RPM V 8 (6555 cc | 400.0 cu in. | 6.6 L.) with 240 HP (176.64 KW) @ 4400 RPM and 325 Ft-Lbs (441 NM) @ 3200 RPM Q: What transmission did the 1976 Dodge Monaco have? A: The 1976 Dodge Monaco had a 3 speed Automatic gearbox.