conceptcarz.com

1975 Porsche 914 Specifications

These are standard specifications for the 1975 Porsche 914, not necessarily specifications for the vehicle(s) in the photo(s).
Engine Location : Mid
Drive Type : Rear Wheel
Body / Chassis : Steel Monocoque
Production Years for Series : 1969 - 1976
Price : $5,400-$6,050
Weight : 2030 lbs | 920.793 kg
Chassis Range : 4752900001 - 4752911368
0-60 mph : 14 seconds.
Top Speed : 107 mph | 172.163 km/h
Opposed 4
Displacement : 1795 cc | 109.5 cu in. | 1.8 L.
Power : 72 BHP (52.992 KW) @ 4800 RPM
Torque :94 Ft-Lbs (127 NM) @ 3400 RPM
Bore : 3.7 in | 93 mm.
Stroke : 2.6 in | 66 mm.
Compression : 7.3:1
Main Bearings : 4
Bosch electronic port fuel injection
Opposed 4
Displacement : 1971 cc | 120.3 cu in. | 2.0 L.
Power : 91 BHP (66.976 KW) @ 4900 RPM
Torque :105 Ft-Lbs (142 NM) @ 3500 RPM
Bore : 3.7 in | 94 mm.
Stroke : 2.8 in | 71 mm.
Compression : 7.6:1
Main Bearings : 4
Bosch electronic port fuel injection
Transmission:
5 Manual

Total Porsche Production for 1975 : 16,224
914 Production (1969-1976) : 118,978
  : 115646 Type 914/4; 3332 were 914/6; 2 were 914/8
Total 1975 914 production : 11,200
1975 Porsche 914

Targa

Targa
Targa
Targa
Chassis # 4752905155
Engine # EC043209
View info And history
Auction entries : 1
Seating Capacity : 2
Doors : 2
Exterior
Length : 161.2 in | 4095 mm.
Width : 65.0 in | 1651 mm.
Height : 48.4 in | 1229 mm.
Wheelbase : 96.5 in | 2451 mm.
Front Track : 52.9 in | 1344 mm.
Rear Track : 54.4 in | 1382 mm.

Targa

Price : $6,050
Weight : 2030 lbs | 920.793 kg
Seating Capacity : 2
Doors : 2
Exterior
Length : 161.2 in | 4095 mm.
Width : 65.0 in | 1651 mm.
Height : 48.4 in | 1229 mm.
Wheelbase : 96.5 in | 2451 mm.
Front Track : 52.9 in | 1344 mm.
Rear Track : 54.4 in | 1382 mm.

Suspension
Front : MacPherson struts with single lower transverse A-arms adn longitudinal torsion bars

Rear : Semi-trailing arms with coil springs

Tires / Wheels
Tires : 165SR15

Optional Tires
Tires : 165HR15

Component

FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM:FUEL RAIL

Manufacturer

PORSCHE CARS N.A. INC.

NHTSA Campaign ID77V105000
SummaryTHE BATTERY COVERS ON THE INVOLVED VEHICLES MAY BE MISSING, DAMAGED, OR IMPROPERLY INSTALLED. THIS CONDITION COULD ALLOW WATER TO CONTACT THE TOP OF THE BATTERY AND MIX WITH ACID. THIS MIXURE COULD CAUSE THE FUEL HOSES TO DETERIORATE AND LEAD TO FUEL LEAKAGE.
RemedyDEALER WILL INSTALL A NEW BATTERY COVER AND HOLD DOWN CLAMP, AND REPLACE ALL FUEL HOSES IN THE ENGINE COMPARTMENT, WITHOUT CHARGE TO OWNER.
NotesVEHICLE DESCRIPTION: PASSENGER VEHICLES.SYSTEM: ELECTRICAL; BATTERY COVER.CONSEQUENCES OF DEFECT: SHOULD LEAKAGE OCCUR IN THE PRESENCE OF A SOURCE OFIGNITION, A VEHICLE FIRE AND PASSENGER INJURIES COULD RESULT.NOTE: OWNER SHOULD BE ALERT TO ANY STRONG GASOLINE ODOR IN THE PASSENGERCOMPARTMENT OR FUEL STAINS BENEATH THE VEHICLE. IN EITHER CASE, THE VEHICLESHOULD NOT BE DRIVEN AND THE DEALER SHOULD BE NOTIFIED IMMEDIATELY.

Information provided by NHTSA
Data updated January 2023
1975 Averages
Avg. Car Cost : $4,250
Avg. Household Income : $14,100
Avg. Home : $39,300
Avg. Gallon of Gas : $0.44

Popular frequently asked questions include:

What are the dimension and mechanical specifications of the 1975 Porsche 914?
How many 1975 Porsche 914 were produced?
How powerful was the 1975 Porsche 914? Was the 1975 Porsche 914 popular? Was the 1975 Porsche 914 expensive? What was the fuel economy of the 1975 Porsche 914?

Q: How fast is the 1975 Porsche 914? A: The 1975 Porsche 914 has a top speed of 107 mph.

Q: What is the wheelbase size of the 1975 Porsche 914? A: The 1975 Porsche 914 has a wheelbase size of 96.50 inches.

Q: What is the length of the 1975 Porsche 914? A: The 1975 Porsche 914 has a length of 161.20 inches.

Q: What is the width of the 1975 Porsche 914? A: The 1975 Porsche 914 has a width of 65.00 inches.

Q: How much did the 1975 Porsche 914 cost when new?A: The 1975 Porsche 914 cost approximately $5,400 to $6,050 (USD) when new.

Q: What is the bodystyle of the 1975 Porsche 914? A: The 1975 Porsche 914 was a Targa.

Q: What tires did the 1975 Porsche 914 have? A: The 1975 Porsche 914 had 165SR15 tires.

Q: How many vehicles did Porsche produce in 1975? A: Porsche produced 16,224 automobiles in 1975.

Q: How many 914 were produced? A: Porsche produced 118,978 examples of the 914 from 1969 to 1976.

Q: How many 1975 914s were produced? A: Porsche produced 11,200 examples of the 914 in 1975.

Q: What engines did the 1975 Porsche 914 have? A: The 1975 Porsche 914 had the following engine options: Opposed 4 (1795 cc | 109.5 cu in. | 1.8 L.) with 72 BHP (52.992 KW) @ 4800 RPM and 94 Ft-Lbs (127 NM) @ 3400 RPM
  • Opposed 4 (1971 cc | 120.3 cu in. | 2.0 L.) with 91 BHP (66.976 KW) @ 4900 RPM and 105 Ft-Lbs (142 NM) @ 3500 RPM
  • Q: What transmission did the 1975 Porsche 914 have? A: The 1975 Porsche 914 had a 5 speed Manual gearbox.