conceptcarz.com

Aston Martin DB2

Aston Martin MKIII
Aston Martin Mark III
Aston Martin DB2/4 MK III
Aston Martin DB 2/4 MKIII

Total Production: 550
The DB name came from the name David Brown (later Sir David Brown), an individual who had purchased the Aston Martin Company.
The DB series was built from 1950 through 1953 with only 411 examples being produced. Power was supplied by a W.O. Bentely-designed Lagonda six-cylinder engine that was capable of producing 116 bhp and could propel the car to a top speed of 117 mph. The zero-to-sixty time was around 11.2 seconds. The Vantage series received 125 bhp.

The two-seater DB2's were available in two body styles, the coupe and drophead.

In 1953, the DB2/4 MK1 became available. This series featured a four seater, 2+2, saloon or drophead body style. The design went through minor changes with the most notable changes appearing in the front of the vehicle. The early versions of the vehicle featured a hatchback rear window.

The DB2/4 MK1's were originally powered by a 2.6-liter Vantage engine but were later replaced with a 3-liter, 140 bhp engine that was not only more powerful, it was heavier.

The MK1 series ended in 1955 with 565 examples being produced, 73 being dropheads.

The DB2/4 MK2 series began in 1995 and would continue until 1957. During this time frame, 199 examples were produced. There were two body styles available; a coupe and a convertible. Both had two doors and four seats. A hardtop style saloon was also available although less than 35 were produced.

Most MK2's were mechanically similar to the MK1's, however, later versions received engine modifications that included larger valves and different camshafts. The horsepower output was increased to 165.

In 1957, Aston Martin introduced the final derivation of the DB2 series, the DB MK III. It would continue production until 1959 and amass a production total of 551 units. It was offered in Saloon or Convertible body styles and consisted of 4 seats. The base engine produced 162 horsepower, propelling the vehicle to a top speed of 120 mph.
By Daniel Vaughan | Mar 2006

Aston Martin DB 2/4

Aston Martin DB2-4 MKII
Aston Martin DB2-4 MKI
Aston Martin DB2/4
Aston Martin DB2/4

Aston Martin DB2
Aston Martin DB2
Aston Martin DB2
Aston Martin DB2

Total Production: 411


Total Production: 3

Model Production *

* Please note, dates are approximate

Related Articles and History

The Aston Martin DB2 was introduced to the public at the New York Motor Show. This was not the vehicle's first appearance as it had been raced at the grueling 24 Hours of LeMans where one of the drivers, Pierre Marechal, had been involved in a fatal accident. The DB2 was designed by Frank Freeley and configured as a two-seater touring vehicle. It was Aston Martin's first real production vehicle. The name was derived from the initials of the company's founder, David Brown. The production designs were very similar to the vehicles raced at LeMans, offering LeMans performance and touring comfort. Power was supplied by a twin-cam, W.O. Bentley-designed Lagonda six-cylinder engine capable of producing 115 horsepower. With the 'Vantage' option that became available in 1951, the output increased to 125 horsepower, thanks in part to SU HV6 carburetors and high-compression pistons.

During the DB2's lifespan lasting from 1950 through 1953, 411 examples were produced.

In 1953 Aston Martin introduced the DB2/4 MK1. This version was available in 2+2 Saloon Coupe configuration or as a Drophead Coupe. The Saloon version featured a hatchback rear window, an uncommon design at the time. There were only 73 Dropheads created.

The DB2/4 had been modified both mechanically and aesthetically from its predecessor. The front received updates that gave it a 'cleaner' design. The 2.6 Liter Vantage engine was placed under the hood and provided power for the rear wheels. Due to the extra weight of the DB2/4 MK1, a more powerful 3.0-liter engine capable of producing 140 horsepower was used in 1954.

During the DB2/4 MK1 lifespan lasting from 1953 through 1955, 565 examples were produced.

In 1955 Aston Martin introduced the successor to the MK1, the MK2. There was little to distinguish the MK2. It had the same mechanics as its predecessor and only minor exterior modifications. The main differences were a square rear wing and the addition of the notchback-hardtop that was added to the body-style configurations. There were only thirty of these created. Nearing the end of the MK2, the power was increased to 165 horsepower from the six-cylinder engine.

During the DB2/4 MK2 lifespan lasting from 1955 through 1957, 199 examples were created.

In 1957 Aston Martin introduced the MK III. It was available as a coupe or convertible, both were two-door and capable of seating four individuals. This was the final installment of the DB2 family. It received several mechanical updates including Girling disc brakes, hydraulic clutch, automatic, and overdrive transmission options. This marked the first time that Aston Martin offered disc brakes as standard equipment on a vehicle. Al-Fin drum brakes were used in the rear. Aesthetically, it was similar to its predecessors but had received modifications to the front, including the DB3S grille. The modifications were enough to make the MKIII the most beautiful of all the DB2 models.

The zero-to-sixty time was now rated at 9.3 seconds with the top speed at 120 miles per hour. In standard form with the optional dual exhausts, horsepower was raised to 178 horsepower. By adding Webers, high-compression pistons, and an oil cooler, the horsepower rating skyrocketed to an astonishing 220. These improvements were courtesy of the knowledge Aston Martin had ascertained on the racing track.

During the DB MK III lifespan lasting from 1957 through 1959, 551 examples were produced.


By Daniel Vaughan | Mar 2006

The first Aston Martin was built in 1913 by London Singer dealers Robert Bamford and Lionel Martin. It was comprised of a Coventry Simplex engine and an Isotta Fraschini chassis. They were later joined by Count Louis Zborowski, who provided finical backing and was an avid racer. Under the patronage of Augustus Bertelli, the legacy of Aston Martin continued to grow in motorsports throughout the years. Motorsports were expensive, and by 1925 the company had entered into receivership, a trend common to the company throughout its lifetime.

In 1926 the Aston Martin Motors Ltd. was incorporated with A.C. (Bert) Bertelli as one of the new directors. With the help of Bertelli, the company weathered the run years and the various financial backers. To many, Bertelli is the father of Aston Martin and some of the greatest pre-War era cars were created under his guidance. Their Ulster and 1.5-liter cars enjoyed much success including at the 24 Hours of LeMans.

A.C. Bertelli left Aston Martin in 1937, soon after the arrival of the new 2-liter car. This car was a shift in the way the company did business, as it was less sporty and marketed more towards civilized driving. In 1939 the company introduced a prototype designed by Claude Hill dubbed the Atom. It was comprised of a steel spaceframe chassis and given a four-door sedan body. When gearbox manufacturer David Brown was given the opportunity to drive the Atom in 1947, he decided to buy the company.

The Atom was a slightly odd-looking vehicle but possessed many modern features which would become the starting point for many new models in the years to come. Aston Martins's push-rod engines, however, were deemed inadequate by Mr. Brown. Rather than creating a new engine design he simply purchased Lagonda and the rights to produce the W.O. Bentley-designed twin-cam six-cylinder engine. This engine would become the basis for Aston Martin engines in the years to come and would give the company many podium finishes.

While negotiations were still in process with Lagonda, a small number of two-liter Aston Martins were created based on the Atom design. At the time, they were called 2-Liter Sports; in modern times they are commonly referred to as the DB1.

A six-cylinder Aston Martin racer made its racing debut at the first 24 Hours of LeMans in the post-War era. The production version was shown in April of 1950 at the New York Auto Show. It was called the DB2 and powered by a 2.6-liter Lagonda six clothed in a two-door coupe body designed by Frank Freely. The design was well received by the public and it appeared as though financial stability would soon become part of the company's lineage. The small factory struggled to keep pace with the demand for the new coupe as more interest was created by the Works DB2s as they scored several important victories including first and second in class at LeMans in 1950.

The first fifty cars created had large grilles that were later removed. In 1951, the Vantage model was introduced which was an upgraded version of the DB2. The DB3 became the company's racing entrant while the DB2 was their road-going model.

The two-seater DB2's first major update came in 1953 when it was given two rear seats and a name change to DB2/4. This, as was the DB2, was available in either fixed or drop-head configuration. Several chassis were delivered to custom coachbuilders to be fitted with unique creations orchestrated by customer's desires and demands. Among them were the 'Wacky' Arnolt commissioned Bertone Spiders which were very attractive and equally as popular.

Though meant for the road, the DB2/4 models were used by privateers in many various sporting events with much success. This inspired the Works to prepare three examples for the Rallye Monte Carlo in 1955. Their efforts were rewarded with a first in class and a Team Prize.

Another major revision occurred in 1956 with the introduction of the DB2/4 MKII featuring a three-liter version of the six-cylinder engine producing 140 horsepower. An even more powerful version was available, featuring a high-lift camshaft, larger valves, and 165 horsepower. Coachbuilders were still given the opportunity to create their versions of the car. The most memorable was a Touring created Spyder shown at the 1956 Earls Court show in London. Three additional orders were placed but never materialized. Nevertheless, this would be the start of a relationship between the British-based Aston Martin Company and the Touring Coachbuilding firm, resulting in spectacular creations throughout the years.

The fourth and final update to the DB2/4 was the MKIII, also known as the DB MK III, introduced in 1957. The basic design of the prior DB cars was retained, as it had proven to be very popular and versatile. The most noticeable change was to the front which received a revised frontal region. The big changes occurred elsewhere, with the vehicle's mechanical components, including the standard 162 horsepower engine and front disc brakes. Both of these changes greatly improved the vehicle's performance and handling capabilities.

In 1958 the DB2 Series was replaced by the DB4 which was powered by a 3.7-liter version of the six-cylinder engine.


By Daniel Vaughan | Oct 2007