 1967 400 GT | 1969 400 GT  |
 |  |  |  |  |
 |  |
1968 Lamborghini 400 GT 2+2 news, pictures, and information | ||
| Tweet | ||
 | Coupe Chassis Num: 01252 Engine Num: 1418 | |
| Sold for $280,500 at 2013 RM Auctions. | ||
The prototype of the 350GTV was shown at Turin in November of 1963. Although it was not ready for production when unveiled, it was given a lukewarm reception by the press. The chassis was by Neri & Bonacini and its Scaglione-style body was by Sargiotto. The styling was later passed on to Carrozzeria Touring of Milian for refinement. With its new aluminum-alloy superleggera coachwork, the new Lamborghini was given a warm reception at Geneva in March of 1964. Production was contracted out to Marazzi. The V-12 performance and excellent handling were courtesy of Bizzarrini, with top speed in excess of 150 mph.
Two years later, the car evolved into the 400GT 2+2. This new car had vestigial rear seating and subtle styling alterations while residing on the same 100.4-inch wheelbase. It was given four headlights to help differentiate it from its predecessor. The floor pan was lowered, and the roof was raised 2.6-inches. Additional interior room was found by revising the upper and lower rear control arms in the front to the rear arrangement. An additional windshield wiper was added, and the body was produced in steel. It had a single 23 gallon fuel tank which replaced the dual 10.5-gallon tanks on the previous model.
Under the bonnet, the 3.5-liter engine was enlarged to 4 liters. Horsepower increased from 280 to 320. Suspension was double wishbones with four-wheel disc brakes, along with a Lamborghini-built five-speed gearbox designed by Chief Engineer Gian Paolo Dallara, replacing the ZF-derived gearbox.
This Car
This Lamborghini, chassis number 1252, was the 216 example produced. It wears Touring production number of 23966. An important collection acquired this car in 2009. Prior to that, it was owned by a business owner in Carmel, California since the late-1970s.
In 2012, the car was offered for sale at RM Auction's Scottsdale Auction. It was estimated to sell for $275,000-$375,000.
By Daniel Vaughan | Jan 2013
Ferruccio Lamborghini had built a significant amount of wealth as a tractor builder. When he bought a Ferrari he expected a vehicle with superior performance and few problems. What he got was a car that did have superior performance but was plagued with mechanical difficulties. Upon returning the vehicle to the Ferrari shop and complaining about the lack of build quality, Enzo Ferrari replied 'You should stick with building tractors and let me concern about the cars.' Ferruccio was so enraged, that he began a new quest - to build proper supercars that had performance and quality.
Bizzarini, a brilliant engineer, had just left Ferrari and was a suitable candidate to build Lamborghini a twelve-cylinder engine. Franco Scaglione, an employee of Sargiotto located in Turin, was tasked with designing a new vehicle for the newly formed Automobili Ferruccio Lamborghini S.p.A. Scaglione's resume included work such as the Alfa Romeo BATs and the ATS 2500 GT. Sargiotto Bodyworks were responsible for the metal work while Neri & Bonacini were given the task of building the square tube steel chassis. The result was a prototype labeled the Lamborghini 350 GTV and first displayed at the 1963 Turin Auto Show. The interior was leather while the finish was a bright metallic blue color. The engine was not installed in the car because it would not fit. The vertical carburetors were too large and did not fit under the hood. Only recently has the vehicle been restored and the chassis was altered to allow room for the engine.
After the Turin Show, Carlo Anderloni of Touring was brought in to redesign the 350 and prepare it for production. The design was smoothed out and the pop-up headlights were replaced with units that were gracefully incorporated into the hood of the vehicle. The 3.5-liter V12 with twin overhead camshafts and six twin-choke Weber carburetors was placed horizontally between the camshafts in order to fit under the hood. Along with the redesign, the engine was detuned because Ferruccio Lamborghini desired a smooth running, refined engine rather than a highly-tuned racing power-plant. Horsepower dropped from 350 to 270. A 320 horsepower version was available as optional equipment.
In 1964 Ferruccio Lamborghini debuted the production version, the 350 GT, the V had been dropped, to the public at the Geneva Auto Show. The car was powered by a Giotto Bizzarini designed 12-cylinder engine, sat atop a tubular steel chassis, and featured independent suspension and a ZF gearbox. Disc brakes were placed on all four tires. This was Lamborghini's first serial-production GT vehicle. Producing 280 horsepower, the 350 GT was a formidable contender with the other super-cars of the day.
Two shortened chassis's were sent to Zagato, renowned for their lightweight construction, to create alternative creations to the Touring design. Ercole Spada of Zagato was given the task of designing the body. The result was a very elegant coupe that drew inspiration from previous work such as Lancia and Alfa Romeo racers. It was shown at the 1965 London Motor Show under the name Lamborghini 3500 GTZ. Only two examples were ever created. One was retained by the factory while the other was sold to a customer after the show.
Another coachbuilding factory was commissioned in the mid-1960s to create a mid-engined supercar. It was known as the Miura and was powered by a four-liter V12. In 1966 the four-liter engine was available in the front-engined Lamborghini as optional equipment. This version became known as the 400 GT. A few examples were built before it was replaced by the 400 GT 2+2. The two-plus-two configuration made the supercar a little more practical, allowing room for additional occupants in the rear seats. The design of the 2+2 varied slightly from the 400 GT. The 2+2 was constructed of steel while the 400 GT used aluminum. The most distinguishable difference was the double-oval headlights in the front of the 2+2.
In 1966 a Lamborghini 400 GT Monza prototype was created that carried the mechanical components of Lamborghini with styling reminiscent of Ferrari's legendary 250 GTO series. The design was handled by Neri & Bonacini and was shown to the public at the 1966 Barcelona Motor Show. It was sold to a wealthy Spanish individual who used the vehicle as a daily driver. It was put into storage in the early 1970's with the odometer reading just 7,000 km's. It remained in possession of the family until the owner's death in the mid-2000's. Bonham's Auction had the pleasure of offering the vehicle up for auction at the 2005 London Olympia sale where it was sold for $315,000.
During its introductory year, only thirteen examples of the 350 GT version were created. Around 120 examples were created in total and all were mostly hand-built. Since these were mostly hand-built, specifications and designs may vary. For example, most of the 400 GTs intended for the US market were given four round headlights, however, a few had larger oval units that were common on the 350 GT.
There were about 224 examples of the 400 GT 2+2 constructed. Five examples being right-hand drive.
The 350/400 GT Series represent Lamborghini's intention to construct the finest Grand Touring autombiles ever assembled. Many automotive journalists at the time hailed the cars as being better than equivalent exotic machinery.
By Daniel Vaughan | Dec 2006
For more information and related vehicles, click hereBizzarini, a brilliant engineer, had just left Ferrari and was a suitable candidate to build Lamborghini a twelve-cylinder engine. Franco Scaglione, an employee of Sargiotto located in Turin, was tasked with designing a new vehicle for the newly formed Automobili Ferruccio Lamborghini S.p.A. Scaglione's resume included work such as the Alfa Romeo BATs and the ATS 2500 GT. Sargiotto Bodyworks were responsible for the metal work while Neri & Bonacini were given the task of building the square tube steel chassis. The result was a prototype labeled the Lamborghini 350 GTV and first displayed at the 1963 Turin Auto Show. The interior was leather while the finish was a bright metallic blue color. The engine was not installed in the car because it would not fit. The vertical carburetors were too large and did not fit under the hood. Only recently has the vehicle been restored and the chassis was altered to allow room for the engine.
After the Turin Show, Carlo Anderloni of Touring was brought in to redesign the 350 and prepare it for production. The design was smoothed out and the pop-up headlights were replaced with units that were gracefully incorporated into the hood of the vehicle. The 3.5-liter V12 with twin overhead camshafts and six twin-choke Weber carburetors was placed horizontally between the camshafts in order to fit under the hood. Along with the redesign, the engine was detuned because Ferruccio Lamborghini desired a smooth running, refined engine rather than a highly-tuned racing power-plant. Horsepower dropped from 350 to 270. A 320 horsepower version was available as optional equipment.
In 1964 Ferruccio Lamborghini debuted the production version, the 350 GT, the V had been dropped, to the public at the Geneva Auto Show. The car was powered by a Giotto Bizzarini designed 12-cylinder engine, sat atop a tubular steel chassis, and featured independent suspension and a ZF gearbox. Disc brakes were placed on all four tires. This was Lamborghini's first serial-production GT vehicle. Producing 280 horsepower, the 350 GT was a formidable contender with the other super-cars of the day.
Two shortened chassis's were sent to Zagato, renowned for their lightweight construction, to create alternative creations to the Touring design. Ercole Spada of Zagato was given the task of designing the body. The result was a very elegant coupe that drew inspiration from previous work such as Lancia and Alfa Romeo racers. It was shown at the 1965 London Motor Show under the name Lamborghini 3500 GTZ. Only two examples were ever created. One was retained by the factory while the other was sold to a customer after the show.
Another coachbuilding factory was commissioned in the mid-1960s to create a mid-engined supercar. It was known as the Miura and was powered by a four-liter V12. In 1966 the four-liter engine was available in the front-engined Lamborghini as optional equipment. This version became known as the 400 GT. A few examples were built before it was replaced by the 400 GT 2+2. The two-plus-two configuration made the supercar a little more practical, allowing room for additional occupants in the rear seats. The design of the 2+2 varied slightly from the 400 GT. The 2+2 was constructed of steel while the 400 GT used aluminum. The most distinguishable difference was the double-oval headlights in the front of the 2+2.
In 1966 a Lamborghini 400 GT Monza prototype was created that carried the mechanical components of Lamborghini with styling reminiscent of Ferrari's legendary 250 GTO series. The design was handled by Neri & Bonacini and was shown to the public at the 1966 Barcelona Motor Show. It was sold to a wealthy Spanish individual who used the vehicle as a daily driver. It was put into storage in the early 1970's with the odometer reading just 7,000 km's. It remained in possession of the family until the owner's death in the mid-2000's. Bonham's Auction had the pleasure of offering the vehicle up for auction at the 2005 London Olympia sale where it was sold for $315,000.
During its introductory year, only thirteen examples of the 350 GT version were created. Around 120 examples were created in total and all were mostly hand-built. Since these were mostly hand-built, specifications and designs may vary. For example, most of the 400 GTs intended for the US market were given four round headlights, however, a few had larger oval units that were common on the 350 GT.
There were about 224 examples of the 400 GT 2+2 constructed. Five examples being right-hand drive.
The 350/400 GT Series represent Lamborghini's intention to construct the finest Grand Touring autombiles ever assembled. Many automotive journalists at the time hailed the cars as being better than equivalent exotic machinery.
By Daniel Vaughan | Dec 2006
| Ford Adding 2,000-Plus Jobs at Kansas City Assembly to Support Surging F-150 Demand, Ford Transit Launch | |
 | •Ford's Kansas City Assembly Plant will add more than 2,000 jobs to support high demand for Ford F-150 plus the planned production of the all-new Transit family of commercial vehicles starting next summer; more than 1,000 will be new hires •Ford F-Series sales up 24 percent in April and 19 percent year to date; full-size truck segment growing three times faster than industry average and is fastest-growing segment this year •Ford has reached 75 percent of its goal to create 12,000 hourly jobs ...[Read more...] |
| Ford Adding 2,000-Plus Jobs At Kansas City Assembly To Support Surging F-150 Demand, Ford Transit Launch | |
| - Ford's Kansas City Assembly Plant will add more than 2,000 jobs to support high demand for Ford F-150 plus the planned production of the all-new Transit family of commercial vehicles starting next summer; more than 1,000 will be new hires - Ford F-Series sales up 24 percent in April and 19 percent year to date; full-size truck segment growing three times faster than industry average and is fastest-growing segment this year - Ford has reached 75 percent of its goal to create 12,000 hourly jo...[Read more...] | |
| Lexus Celebrates The International Design Community With 'Design Matters' Event In New York City | |
| Akio Toyoda hosts event showcasing commitment to design NEW YORK (April 19, 2013)—In its ongoing pursuit of innovation, Lexus is pushing the boundaries of technology, craftsmanship and design. This dedication to design was celebrated at an event hosted by global President Akio Toyoda in New York City. The event, called 'Design Matters,' showcased Lexus' commitment to design, both in its new products and in its global brand activities to an audience of established and aspiring me...[Read more...] | |
| Auctions America Reunites Original Mustang Owner With His Car | |
 | Nearly five decades after Leon Fake bought a new 1965 Ford Mustang GT, the Silver Blue convertible is back in his garage thanks to the Auctions America by RM Spring Carlisle auction in Carlisle, Pennsylvania. Fake was one of several bidders chasing a dream car during the April 26-27 event in which 267 collector vehicles were offered with a 53% sell-through rate for more than $2.5 million* in total sales. 'I put 85,000 miles on this Mustang and sold it,' said Fake. 'I tried to buy it back a fe...[Read more...] |
| Size Matters: EcoBoost Gives Ford the Industry Lead in Reducing Engine Size Without Giving Up Performance | |
 | •Ford offers seven vehicles with the smallest engines in their segments – more than any other competitor •Powered by EcoBoost®CO2 emissions while delivering the performance customers demand technology, Ford's smaller engines help reduce vehicle weight for better fuel economy and lower •Ford's smallest engine yet, the EcoBoost 1.0-liter three-cylinder, debuts in North America about a year from now For decades, size meant everything when it came to engines – bigger was better and there was no...[Read more...] |
 1968
Lamborghini
models |
| Lamborghini Espada 400 GT S1 |
| Lamborghini Islero |
| Lamborghini Miura |
| Similar Automakers | |
| Aston Martin | Bentley |
| Bugatti | Devon |
| Ferrari | GTA |
| Koenigsegg | Lotus |
| Maserati | Maybach |
| McLaren | Porsche |
| Rolls-Royce | Spyker |
| Tesla | |
| Lamborghini: 1961-1970 |
| Similar Automakers |
| Lamborghini History |
| Other models by Lamborghini |
| Related Articles and Event Coverage |
| RM Auctions - Arizona |
| 32nd Annual Ault Park Concours d'Elegance |
| 2005 Meadow Brook Concours d'Elegance |
| |||||||||||||||||||||||||||||||||||
| 350/400 Aventador Countach | Diablo Espada F1 | Gallardo Islero Jalpa | Jarama LM 002 Miura | Murcielago Murciélago LP 670-4 SuperVeloce Silhouette | Urraco |
| 1967 400 GT | 1969 400 GT |
