|
|
|
|
|
|
| |
|
|
|
|
The Pininfarina designed Ferrari 308 was debut in 1975 and was immediately a success. The vehicles performance, handling, and styling were phenomenal.
For the initial 18 months of the 308 GTB's production, fiberglass was predominately used for the bodies, but later switched to all-metal. The fiberglass bodies were around 125 kg lighter.
The 308 was capable of producing 255 bhp from its 3 liter, V8, carburetor engine. In 1980, a Bosch K-Jetronic fuel injection system was installed due to new emission regulations. This caused the horsepower to drop to around 215 hp, thus making the 308 GTBi the slowest of the 308 series.
In 1981, Ferrari introduced 4 valve heads for the 3 liter V8's. This 308's now became known as 308 GTB/GTS Quattrovalvole. The engine now produced 240 BHP, and with the extra weight that was imposed due to using all-metal rather than fiberglass, the performance and handling was back to where it was when it began production.
In 1985, Ferrari introduced the 328 GTB/GTS. A vehicle that came equipped with a 3185 cc engine that produced 270 BHP.
For the initial 18 months of the 308 GTB's production, fiberglass was predominately used for the bodies, but later switched to all-metal. The fiberglass bodies were around 125 kg lighter.
The 308 was capable of producing 255 bhp from its 3 liter, V8, carburetor engine. In 1980, a Bosch K-Jetronic fuel injection system was installed due to new emission regulations. This caused the horsepower to drop to around 215 hp, thus making the 308 GTBi the slowest of the 308 series.
In 1981, Ferrari introduced 4 valve heads for the 3 liter V8's. This 308's now became known as 308 GTB/GTS Quattrovalvole. The engine now produced 240 BHP, and with the extra weight that was imposed due to using all-metal rather than fiberglass, the performance and handling was back to where it was when it began production.
In 1985, Ferrari introduced the 328 GTB/GTS. A vehicle that came equipped with a 3185 cc engine that produced 270 BHP.
| Photos grouped by event | |
![]() 2006 Palm Beach Cavallino Classic |
![]() 2006 Palm Beach Cavallino Classic XV Concours |
1976 Ferrari 308 GTB Competizione |
|
| Year | 1976 |
| Make | Ferrari |
| Model | 308 GTB Competizione |
| Engine Location | Mid |
| Drive Type | Rear Wheel |
| Body Designer | Pininfarina |
| Weight | 3160 lbs | 1433.4 kg |
| Combined MPG | 0.00 |
| Chassis / Engine Numbers Shown | |
| Chassis Number | 19595 |
| Performance | |
| 0-60 mph | 8.2 seconds. |
| 1/4 Mile | 14.6 seconds. |
| Top Speed | 147 mph | 236.5 km/h Similar top speeds |
| Engine | |
| Engine Configuration | V |
| 90-degree | |
| Vee-Type | |
| Cylinders | 8 |
| Aspiration/Induction | Normal |
| Displacement | 2927.00 cc | 178.6 cu in. | 2.9 L. |
| Valves | 16 valves. 2 valves per cylinder. |
| Valvetrain | DOHC |
| Horsepower | 240.00 BHP (176.6 KW) @ 6600.00 RPM |
| Torque | 195.00 Ft-Lbs (264.4 NM) @ 5000.00 RPM |
| HP to Weight Ratio | 13.2 LB / HP (Vehicles with similar ratio) |
| HP / Liter | 82.8 BHP / Liter |
| Compression Ratio | 8.8:1 |
| Main Bearings | 5 |
| Block | Light Alloy |
| Head | Light Alloy |
| Vehicles with similar horsepower and weight | |
| Standard Transmission | |
| Gears | 5 |
| Transmission | Manual |
| In rear transaxle | |
| Final Drive | 3.70:1 |
| View more photographs |
| Similar Automakers |
| Add Review |
| Other models by Ferrari |
| View Specifications |
| Articles and Event Coverage |
| 2006 Palm Beach Cavallino Classic |
| 2006 Palm Beach Cavallino Classic XV Concours |
| Additional Resources and Links |
| Palm Beach Cavallino Classic Concours Official Website |
| Palm Beach Cavallino Classic Official Website |
| 1976 Ferrari models |
| 308 GTB |
| 312 T2 |
| 400 |
| Vehicle Spotlight | ||
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |






























