|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1940 Cadillac Series 90 Sixteen news, pictures, and information
 | | View more photos Convertible Coachwork: Fleetwood |
 |  | View more photos Convertible Coupe Coachwork: Fleetwood |
The basic five-passenger Cadillac sedan of 1940 sold for $1,745 with a V-8 but $5,140 with a V-16 - a premium no longer really justified, as Cadillac's V-8 was one of the smoothest engines anywhere. It was the last year for the V16 engine.
Some of Cadillac's most important engineering developments, and some of its most beautiful cars, appeared in the 1940's.
A little over 50 V-16 Cadillacs were produced in 1940. The V-16 had a displacement of 431 cubic-inches and developed 185 horsepower. This Convertible Coupe is quite rare with only a few produced.
Cadillac produced the V-16 from 1930 through 1940. The hood of the V-16 was intimidating - larger and longer than any other vehicle produced. Twelve cylinder engines were rare enough, but only a few manufacturers dared to build a sixteen.
Interestingly, only about 4,000 16's were made during the 11 year run. They were clearly for the wealthy and those with a desire to drive big and drive fast.
This Convertible Coupe is considered one of the rarest and most desirable V16's ever made.
 |  | View more photos Formal Sedan Coachwork: Fleetwood Chassis Num: 5320019 Build Num: 2 of Five Formal Sedans |
The original owner of this car was Ruth Metcalf Roebling, widow of the president of John Roebling's Sons, best known for their work on the Brooklyn Bridge. Ownership passed to Holt Apgar Murray in 1962. It was inherited by her grandson in August of 2005 and sold at auction a short time later where it was acquired by the present owner. At auction, ownership changed again for the sum of $82,500 including buyer's premium.
The car has traveled 65,000 miles since new. It is a well-preserved car that has its original interior, division glass, auxiliary jump seats and padded leather top.
| | View more photos Derham Town Car Coachwork: Derham |
From 1930 through 1940 Cadillac produced a monsterous sixteen-cylinder engine. It was first displayed to the automotive community at the Detroit Opera House prior to the Detroit Auto Show. This was the largest number of cylinders to power an automobile of all time. The hood that housed the engine was intimidating, larger and longer than any other vehicle. Up to this point, there were only a few manufacturers that produced a twelve-cylinder engine, mechanical achievements in their own right. The introduction of the sixteen-cylinder engine was historical and seen as revolutionary at the time.
Up to the 1990's there have only been three manufacturers of a sixteen cylinder engine. The Bugatti Type 47 never made series production while the Marmon Corporation offering was short lived. In comparison, the Marmon built V-16 was more powerful. By using aluminum, the 491 cubic-inch engine with its overhead values weighed just over 900 pounds. The engine was formed by merging twin-eight cylinder engines in a 45-degree angle, giving the engine an impressive look and an astonishing 200 horsepower. The use of steel cylinder sleeves added to the longevity and durability of the engine. The V-16 engine earned Howard Marmon the Society of Automotive Engineers annual design award.
The Cadillac V-16 was the first and remained in production for eleven years.
A new sixteen-cylinder engine was introduced by Cadillac in 1938. This was not their first V16 enigne; their first had been designed by engineer, Owen Nacker of Marmon fame. It had an overhead valve design and mounted at a 45-degree to one another. Each back of the sixteen cylinders had their own exhaust and fuel system. The engine featured hydraulic valve adjusters that helped with the silent valve train operation. The exterior of the engine was equally as impressive, with all the wiring and hoses concealed under cover and finished in chrome, polished aluminum, porcelain and baked enamel. The result was a 452 cubic-inch engine that was nearly unmatched in the industry at the time.
A V12 version followed shortly after the introduction of the V16; it displaced 368 cubic-inches and was basically three-quarters of a V16. Both of these engines remained in production through 1937. The V12 did not resume production for 1938. A new engine was introduced in 1938 and that very different than its predecessors. It was an L-head design, cast in a 135-degree vee, and featured a monobloc design. The was easier and more economical to manfacutre and it weighed 250 pounds less, had 21 fewer cubic-inches, but developed the same power.
The V12 engine was used to power the Series 85 for 1937. The Series 75 and Series 85 were the same vehicle, with the exception of the powerplant. The Series 75 used a V8 engine. In 1938 the V12 was discontinued, and the V16 took its place. The sixteen-cylinder cars were shortened to a length similar to the Series 75, and the chassis and bodies were interchangeable.
There were twelve bodystyles available, including coupes, convertible coupes, and sedans, as well as the larger seven-passenger sedans and limousines. These larger vehicles were called Formal Sedans or Imperial sedans depending on whether they had a division partition.
The Series 90 experienced its best year in 1938 with 315 examples built. The five-passenger Touring Sedan was the most popular, with 41 sold.
In 1939, the front of the V8 Cadillacs were midly updated. The grille was raked back and the headlights were now mounted to the nose and flush with the top of the grille. Chrome moldings were added to the running boards and the fender ornamentaion was now fully chromed. The rear license plate was moved from the left fender to the trunk lid.
There were a total of 138 V16 cars produced in 1939. Few changes or modifications to the car followed for 1940. A total of 61 V16 cars were built this would be the final year for their production. A total of 4,400 examples were built over an eleven year period.
© 1998-2009. All rights reserved. This material may not be published, broadcast, rewritten, or redistributed.
Up to the 1990's there have only been three manufacturers of a sixteen cylinder engine. The Bugatti Type 47 never made series production while the Marmon Corporation offering was short lived. In comparison, the Marmon built V-16 was more powerful. By using aluminum, the 491 cubic-inch engine with its overhead values weighed just over 900 pounds. The engine was formed by merging twin-eight cylinder engines in a 45-degree angle, giving the engine an impressive look and an astonishing 200 horsepower. The use of steel cylinder sleeves added to the longevity and durability of the engine. The V-16 engine earned Howard Marmon the Society of Automotive Engineers annual design award.
The Cadillac V-16 was the first and remained in production for eleven years.
A new sixteen-cylinder engine was introduced by Cadillac in 1938. This was not their first V16 enigne; their first had been designed by engineer, Owen Nacker of Marmon fame. It had an overhead valve design and mounted at a 45-degree to one another. Each back of the sixteen cylinders had their own exhaust and fuel system. The engine featured hydraulic valve adjusters that helped with the silent valve train operation. The exterior of the engine was equally as impressive, with all the wiring and hoses concealed under cover and finished in chrome, polished aluminum, porcelain and baked enamel. The result was a 452 cubic-inch engine that was nearly unmatched in the industry at the time.
A V12 version followed shortly after the introduction of the V16; it displaced 368 cubic-inches and was basically three-quarters of a V16. Both of these engines remained in production through 1937. The V12 did not resume production for 1938. A new engine was introduced in 1938 and that very different than its predecessors. It was an L-head design, cast in a 135-degree vee, and featured a monobloc design. The was easier and more economical to manfacutre and it weighed 250 pounds less, had 21 fewer cubic-inches, but developed the same power.
The V12 engine was used to power the Series 85 for 1937. The Series 75 and Series 85 were the same vehicle, with the exception of the powerplant. The Series 75 used a V8 engine. In 1938 the V12 was discontinued, and the V16 took its place. The sixteen-cylinder cars were shortened to a length similar to the Series 75, and the chassis and bodies were interchangeable.
There were twelve bodystyles available, including coupes, convertible coupes, and sedans, as well as the larger seven-passenger sedans and limousines. These larger vehicles were called Formal Sedans or Imperial sedans depending on whether they had a division partition.
The Series 90 experienced its best year in 1938 with 315 examples built. The five-passenger Touring Sedan was the most popular, with 41 sold.
In 1939, the front of the V8 Cadillacs were midly updated. The grille was raked back and the headlights were now mounted to the nose and flush with the top of the grille. Chrome moldings were added to the running boards and the fender ornamentaion was now fully chromed. The rear license plate was moved from the left fender to the trunk lid.
There were a total of 138 V16 cars produced in 1939. Few changes or modifications to the car followed for 1940. A total of 61 V16 cars were built this would be the final year for their production. A total of 4,400 examples were built over an eleven year period.
| Vehicle Spotlight |
 |  |  |  |  |  |
 |  |  |  |  |  |
 |  |  |  |  |  |
| 1940 Cadillac models |
| Cadillac Series 75 |
| Cadillac Series Sixty |
| Cadillac: 1930-1940 |
| Similar Automakers |
| Cadillac History |
| Manufacturer Website |
| Other models by Cadillac |
 |
Site Map
| Contact
| About Us
| Terms Of Use / Privacy Policy | Links | 
subscribe - RSS
Automobile information, history, and specifications from concept to production. | © 1998-2009 Conceptcarz.com
subscribe - RSSAutomobile information, history, and specifications from concept to production. | © 1998-2009 Conceptcarz.com