1976 AMC Pacer Bi-Centennial 1976 AMC Pacer Bi-Centennial 1976 AMC Pacer Bi-Centennial 1976 AMC Pacer Bi-Centennial
1976 AMC Pacer Bi-Centennial 1976 AMC Pacer Bi-Centennial 1976 AMC Pacer Bi-Centennial 1976 AMC Pacer Bi-Centennial
More Photographs    

View more photos
 
The AMC Pacer Bi-Centennial was from the legendary creator Richard A. Teaque, it was far out of the mainstream design of the 70's that AMC hoped it would create a nitch of its own. Unfortunately AMC pulled the plug on the rotary Wankle Motor. Production of 280,000 units was completed from 1975 to 1980.

In 1977, a V-8 engine was introduced which gave the 'glass bubble' great acceleration. Note that the driver's door is four-inches shorter than the passenger door, making for an easy entry from the curbside.

The Pacer was previously a one owner car. A little old lady in Pennsylvania owned the car since new, but could not drive it anymore. The car was never driven during the winter months. With about 75,000 miles on the car her son talked her into letting her grandson drive the car. For three months the car took quite a bit of abuse, so the dad sold the car to the current owner.

The car is completely original except the paint. The current owner says the car is a pure joy to drive.
The AMC Pacer was produced from 1975 through 1980. The design is one of the most recognizable of all times. Its large windows and fishbowl appearance was designed by Dick Teague with the purpose of appearing futuristic. Richard A. Teague, AMC's chief stylist, had begun working on the design in 1971. He designed the vehicle with the purpose of satisfying future safety regulations, fuel economy concerns, and small-car desires. The original Pacer design called for a roof bump that fell between the front and rear which would act as a roll bar. This never made it into production. Another design that never made it into production was the use of a Wankel rotary engine. Part of the demise of this feature was the rising fuel crisis and concerns about emission legislation in the United States. The Wankel engine did not comply with emission levels so in 1974 GM canceled its development.

The vehicle rested on a 100 inch wheelbase and had a length of 171.8 inches. The large window was designed to break into small round beads in case of an accident. The glass was also designed to help retain passengers inside the vehicle even upon an accident or roll-over. The extensive use of glass made the car rather heavy, which ultimately hurt its fuel economy. In the city, the Pacer average 16 mpg and 26 MPG on the highway.

The Pacer design was very aerodynamic, achieving a drag coefficient of .32.

The design of the AMC Pacer had been intended for the lightweight and compact Wankel engine. When the idea was abandoned, it left AMC struggling to find an alternative. The design was reconfigured to house the AMC inline six-cylinder engine.

During the first year of the AMC Pacer's introduction, there were 145,528 examples produced. Part of its success was its compact design and little competition from other manufacturers. Sales throughout the next few years fell sharply and by 1980, AMC was no longer producing the vehicle. In an effort to stimulate sales and to improve performance, AMC outfitted the Pacer with a High Output 258 cubic-inch six-cylinder engine in 1976. This did, however, decrease the fuel economy. In 1978 a 304 cubic-inch V8 could be added to the Pacer.

In total, 280,000 examples of the AMC Pacer were built. The design is still considered controversial. Its wide body and short design was uncommon. Also, a small car being powered by large engines did little for its fuel economy or its appeal.

The foresight by Teague and AMC was correct with the evolving emission controls, US regulations, and fuel crisis. Sadly, the compact design of the Pacer was controversial; had it been met with greater appeal, the AMC Pacer made have had stronger sales.

1976 AMC Pacer Bi-Centennial

Year1976
MakeAMC
ModelPacer Bi-Centennial
Engine LocationFront
Production Years for Series1975 - 1980
Weight2990 lbs | 1356.3 kg
Combined MPG0.00

Engine  
Engine ConfigurationV
Cylinders8
Hydraulic valve lifters
Aspiration/InductionNormal
Displacement304.00 CU IN. | 4982.6 cc. | 5 L.
ValvetrainOHV
Horsepower120.00 BHP (88.3 KW) @ 3200.00 RPM
HP to Weight Ratio24.9 LB / HP (Vehicles with similar ratio)
HP / Liter24.0 BHP / Liter
Compression Ratio8.0:1
Main Bearings5
Fuel TypeGasoline - Petrol
Fuel FeedCarburetor
2-barrel carburetor
BlockCast-iron
Vehicles with similar horsepower and weight

Standard Transmission
Gears3
TransmissionManual


 
View more photographs
Similar Automakers
Add Review
Other models by AMC
View Specifications
AddThis Social Bookmark Button

Vehicle Ratings
StylingVehicle Styling Rating: 100%
PerformanceVehicle Performance Rating: 100%
InteriorVehicle Interior Rating: 100%
QualityVehicle Quality Rating: 100%
OverallVehicle Overall Rating: 100%
No. of Votes: 1
Rate the Vehicle
Add Review

Articles and Event Coverage
Hilton Head Concours d'Elegance & Motoring Festival

Additional Resources and Links
Hilton Head Island Concours d'Elegance Official Website

1976 AMC models
Pacer

Recent Vehicle News
Alfa Romeo GT Veloce 2000Ferrari F355 BerlinettaLamborghini 350 GT
Cisitalia 202 Spider NuvolariBentley Speed Six SurbicoAudi Metroproject Quattro
Cadillac SixteenChrysler Imperial ConceptBMW Mille Miglia Concept
Volkswagen EOSRolls-Royce Pininfarina HyperionHamann 911 Turbo Stallion
Lamborghini Murcielago LP640 VersaceEdo Competition Gallardo SuperleggeraToyota Aygo Crazy Concept
2008 Lamborghini ReventonAudi R10 TDiLotus Elise SC Clark Type 25
BMW GINA Light VisionaryBreckland BeiraSpada Codatronca TS Concept
Maserati A8 GCS Touring CoupeBugatti Veyron Sang NoirBMW M1 Homage Concept
Maserati Quattroporte Bellagio Fastback