|
|
|
|
| |||
 |  | View more photos Chassis Num: CSX 2558 |
Team USRRC car was driven by Tom Payne to several 1st place finishes. The car is alleged to be the most original 'cutback door' Cobra in existence.
| | Chassis Num: CSX2290 |
The formula for the success of the Cobra came through a man named Carroll Shelby adapting a powerful Ford engine into a nimble, British sports car.
A.C. Cars of Thames Ditton in Surrey, England had been producing the Ace since 1954. It was designed by John Tojeiro and featured an independent suspension by transverse leaf springs. The tubular frame body of the vehicle took its styling cues from Ferrari. The original engine used in the Ace was a 1991 cc, over-head-cam engine designed by John Weller, the founder of AC, in the 1920s. In 1956, an optional Bristol engine became available. This was a BMW derived, 1971 cc six-cylinder engine that was capable of producing 125 horsepower. With the Bristol engine, the Ace captured many victories on the race tracks around the world. It even won the SCCA Class E championship three years in a row.
In 1959, Bristol ceased its six-cylinder engine production. When Bristol stopped supplying A.C. with the engine, the production of the Ace ceased. Carroll Shelby quickly negotiated a deal where A.C. would supply him with the chassis. Now all Shelby needed was an appropriate engine. In 1961, Ford introduced the 221 cubic-inch small block engine. This was a new lightweight, thin wall-cast, V8 engine that produced 164 horsepower. Shelby approached Ford about the use of the engine for the 2-seat sports car. Ford agrees.
In February of 1962, a 260 HiPo engine and Borg-Warner four-speed manual gearbox was fitted into the aluminum-bodied Cobras. The AC Shelby Ford Cobra was complete.
In April of 1962, the first Cobra with chassis CSX 2000 was painted yellow and shipped to the New York Auto Show where it appeared on the Ford display. The vehicle was an instant success and attracted much attention. Orders came faster than Shelby could build. The prototype CSX 2000 was continuously being repainted for magazine reviews. The purpose was to create an illusion that more Cobras existed.
In 1963 the engine size increased to 289 cubic-inches. Rack-and-pinion steering was added to the vehicle.
Two Cobras were entered into the grueling 24-Hours of Le Mans endurance race. Carroll Shelby himself drove one of the vehicles. Ford had refused to provide an engine so Shelby, with the help of A.C. cars and Ed Hugus, prepare the cars. One of the Cobras managed to capture a seventh place finish, a major accomplishment.
Dan Gurney became the first American driver to win an FIA race in an American car when he won the Bridgehampton 500KM race in September of 1963 while driving a Cobra.
In 1964, the Cobra returned to LeMans where it finished fourth overall and first in the GT class.
Near the end of 1964, the Cobra 427 was unveiled to the press. If featured a new tubular, aluminum body, coil spring chassis, and a 427 cubic-inch, 425 horsepower engine. The car was able to go from zero to 100 mph and back to zero in less than 14 seconds. This combination captured the FIA World Championship for Ford in 1965.
In 1965, Ford discontinued its support of Shelby's racing program and the Cobra 427 production ceased after only 160 vehicles had been produced. AC continued to produce the AC 289 until 1968.
In 1967, the last 427 Cobra was built and in 1968, the last 427 Cobra was sold by Carroll Shelby.
Ford had shifted their resources to the new GT40 and modified Mustang programs. In 1966, three GT-40 Mark II's crossed the finish line at Le Mans capturing first, second, and third.
A.C. Cars of Thames Ditton in Surrey, England had been producing the Ace since 1954. It was designed by John Tojeiro and featured an independent suspension by transverse leaf springs. The tubular frame body of the vehicle took its styling cues from Ferrari. The original engine used in the Ace was a 1991 cc, over-head-cam engine designed by John Weller, the founder of AC, in the 1920s. In 1956, an optional Bristol engine became available. This was a BMW derived, 1971 cc six-cylinder engine that was capable of producing 125 horsepower. With the Bristol engine, the Ace captured many victories on the race tracks around the world. It even won the SCCA Class E championship three years in a row.
In 1959, Bristol ceased its six-cylinder engine production. When Bristol stopped supplying A.C. with the engine, the production of the Ace ceased. Carroll Shelby quickly negotiated a deal where A.C. would supply him with the chassis. Now all Shelby needed was an appropriate engine. In 1961, Ford introduced the 221 cubic-inch small block engine. This was a new lightweight, thin wall-cast, V8 engine that produced 164 horsepower. Shelby approached Ford about the use of the engine for the 2-seat sports car. Ford agrees.
In February of 1962, a 260 HiPo engine and Borg-Warner four-speed manual gearbox was fitted into the aluminum-bodied Cobras. The AC Shelby Ford Cobra was complete.
In April of 1962, the first Cobra with chassis CSX 2000 was painted yellow and shipped to the New York Auto Show where it appeared on the Ford display. The vehicle was an instant success and attracted much attention. Orders came faster than Shelby could build. The prototype CSX 2000 was continuously being repainted for magazine reviews. The purpose was to create an illusion that more Cobras existed.
In 1963 the engine size increased to 289 cubic-inches. Rack-and-pinion steering was added to the vehicle.
Two Cobras were entered into the grueling 24-Hours of Le Mans endurance race. Carroll Shelby himself drove one of the vehicles. Ford had refused to provide an engine so Shelby, with the help of A.C. cars and Ed Hugus, prepare the cars. One of the Cobras managed to capture a seventh place finish, a major accomplishment.
Dan Gurney became the first American driver to win an FIA race in an American car when he won the Bridgehampton 500KM race in September of 1963 while driving a Cobra.
In 1964, the Cobra returned to LeMans where it finished fourth overall and first in the GT class.
Near the end of 1964, the Cobra 427 was unveiled to the press. If featured a new tubular, aluminum body, coil spring chassis, and a 427 cubic-inch, 425 horsepower engine. The car was able to go from zero to 100 mph and back to zero in less than 14 seconds. This combination captured the FIA World Championship for Ford in 1965.
In 1965, Ford discontinued its support of Shelby's racing program and the Cobra 427 production ceased after only 160 vehicles had been produced. AC continued to produce the AC 289 until 1968.
In 1967, the last 427 Cobra was built and in 1968, the last 427 Cobra was sold by Carroll Shelby.
Ford had shifted their resources to the new GT40 and modified Mustang programs. In 1966, three GT-40 Mark II's crossed the finish line at Le Mans capturing first, second, and third.
| Photos grouped by event | |
|
Amelia Island Concours d'Elegance |
Hilton Head Concours d'Elegance & Motoring Festival |
1964 Shelby Cobra 289 USRRC |
|
| Year | 1964 |
| Make | Shelby |
| Model | Cobra 289 USRRC |
| Engine Location | Front |
| Drive Type | Rear Wheel |
| Production Years for Series | 1963 - 1965 |
| Weight | 2350 lbs | 1066 kg |
| Combined MPG | 0.00 |
| Chassis / Engine Numbers Shown | |
| Chassis Number | CSX 2558 |
| Chassis Number | CSX2290 |
| Engine | |
| Engine Configuration | V |
| Cylinders | 8 |
| Aspiration/Induction | Normal |
| Displacement | 289.00 CU IN. | 4736.7 cc. | 4.7 L. |
| Valvetrain | OHV |
| Horsepower | 400.00 BHP (294.4 KW) |
| HP to Weight Ratio | 5.9 LB / HP (Vehicles with similar ratio) |
| HP / Liter | 85.1 BHP / Liter |
| Fuel Type | Gasoline - Petrol |
| Fuel Feed | Carburetor |
| 4 Weber carburetors | |
| Vehicles with similar horsepower and weight | |
| Standard Transmission | |
| Gears | 4 |
| Transmission | Manual |
| View Specifications |
| Similar Automakers |
| Add Review |
| Other models by Shelby |
 |
| Related Articles and Event Coverage |
| Amelia Island Concours d'Elegance |
| Hilton Head Concours d'Elegance & Motoring Festival |
| 1964 Shelby models |
| Cobra 289 |
| Cobra 289 B Production Racer |
| Cobra Daytona Coupe |
| Cobra Dragonsnake 289 |
| Vehicle Spotlight | ||
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
