|
|
| | Coupe Designer: Bertone Chassis Num: 01196 |
At the 2006 RM Auction in Monterey, CA it was estimated to sell between $50,000 - $75,000. When bidding was over, it had surpassed the estimates and found a new home at a price of $81,400.
In most respects this ASA 1000 GT is a four-cylinder Ferrari. Enzo Ferrari commissioned Giotto Bizzarini in 1961 to construct a chassis and Bertone to construct the body. The chassis was constructed of traditional tubular members similar to a Ferrari. A transverse wishbone suspension was placed in the front, coil springs in the front and rear, and a live rear axle. The body was comprised of steel with an aluminum hood and deck lid. Four wheel disc brakes were placed on all four corners, something that greatly enhanced the vehicles performance and at a time when most of the other companies still used drums. Power was supplied by a twin overhead camshaft 1,032 cc four-cylinder engine that produced just under 100 horsepower. It was based on the Ferrari 12-cylinder engine. Top speed was estimated at around 115 mph.
This vehicle was Enzo Ferrari's assault on the small car market, mainly targeted at Alfa Romeo and Abarth. The public was given their first glimpse of the vehicle at the 1961 Turin Motor Show where it was met with great reviews. Some believed it would be named the 'Ferrari Mille' but in fact it did not grace the Ferrari stand. The following year the designs were sold to ASA (Autocostruzioni Societa per Azioni), a electro chemical Company.
Production versions of the car were ready by 1965 mainly in coupe form. A few cabriolets were produced. It bore the name 'ASA 1000 GT'. After two years enough vehicles had been produced to satisfy the minimum homologation requirements to race in GT racing. Though advanced for 1961, they offered little competition in 1967 and endured only mild success.
Production of the ASA 1000 began in 1964 and soon began arriving in the US with a sticker-price of $6,000 apiece. The one-liter car was quick and attractive, but the price was prohibitively high. A Spyder was soon added but this did little to entice interest. Of the cerca-50 ASA 1000s built, only a few were Spyders.
It is believed that around 33 examples of the ASA 1000s came to the United States through Ferrari importer Luigi Chinetti.
This vehicle was Enzo Ferrari's assault on the small car market, mainly targeted at Alfa Romeo and Abarth. The public was given their first glimpse of the vehicle at the 1961 Turin Motor Show where it was met with great reviews. Some believed it would be named the 'Ferrari Mille' but in fact it did not grace the Ferrari stand. The following year the designs were sold to ASA (Autocostruzioni Societa per Azioni), a electro chemical Company.
Production versions of the car were ready by 1965 mainly in coupe form. A few cabriolets were produced. It bore the name 'ASA 1000 GT'. After two years enough vehicles had been produced to satisfy the minimum homologation requirements to race in GT racing. Though advanced for 1961, they offered little competition in 1967 and endured only mild success.
Production of the ASA 1000 began in 1964 and soon began arriving in the US with a sticker-price of $6,000 apiece. The one-liter car was quick and attractive, but the price was prohibitively high. A Spyder was soon added but this did little to entice interest. Of the cerca-50 ASA 1000s built, only a few were Spyders.
It is believed that around 33 examples of the ASA 1000s came to the United States through Ferrari importer Luigi Chinetti.
1967 ASA 1000 GT |
|
| Year | 1967 |
| Make | ASA |
| Model | 1000 GT |
| Body Style | Coupe |
| Engine Location | Front |
| Drive Type | Rear Wheel |
| Production Years for Series | 1962 - 1967 |
| Body Designer | Bertone |
| Price | $5,920.00 |
| Weight | 780 kg | 1719.9 lbs |
| Combined MPG | 0.00 |
| Introduced At | 1962 Geneva Motor Show |
| Chassis / Engine Numbers Shown | |
| Chassis Number | 01196 |
| Performance | |
| 0-60 mph | 12.5 seconds. |
| Top Speed | 115 mph | 185 km/h Similar top speeds |
| Engine | |
| Engine Configuration | I |
| Cylinders | 4 |
| Aspiration/Induction | Normal |
| Displacement | 1032.00 cc | 63 cu in. | 1 L. |
| Valves | 16 valves. 4 valves per cylinder. |
| Valvetrain | DOHC |
| Horsepower | 97.00 BHP (71.4 KW) @ 7000.00 RPM |
| HP to Weight Ratio | 17.7 LB / HP (Vehicles with similar ratio) |
| HP / Liter | 97.0 BHP / Liter |
| Compression Ratio | 9.1:1 |
| Fuel Type | Gasoline - Petrol |
| Fuel Feed | Carburetor |
| 2 Weber 40 DCOE carburetors | |
| Vehicles with similar horsepower and weight | |
| Standard Transmission | |
| Gears | 4 |
| Transmission | Manual |
| Synchromesh | |
| Similar Automakers |
| Add Review |
| Other models by ASA |
| View Specifications |
 |
| Vehicle Ratings | ||||||||||
| ||||||||||
| Rate the Vehicle | ||||||||||
| Add Review |
| Articles and Event Coverage |
| Monterey Sports & Classic Car Auction |
| Additional Resources and Links |
| Monterey Sports & Classic Car Auction by RM Auctions Official Website |
| Recent Vehicle News | ||
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 | ||
Conceptcarz.com
| Site Map
| Contact
| Terms Of Use | Links | RSS
| Top
Automobile information, history, and statistics from concept to production. | © 1998-2008 Conceptcarz.com
Automobile information, history, and statistics from concept to production. | © 1998-2008 Conceptcarz.com