1967 Shelby AC Cobra 289 MKIII pictures and wallpaper 1967 Shelby AC Cobra 289 MKIII pictures and wallpaper 1967 Shelby AC Cobra 289 MKIII pictures and wallpaper 1967 Shelby AC Cobra 289 MKIII pictures and wallpaper

View more photos
Chassis Num: COB 6124
 
AC constructed what some believe to be the ultimate Cobra. The 427 cubic-inch engine proved to be powerful and too thirsty for the European market. A special run of twenty six examples were constructed using the much admired coil springs and Ford's lightweight 289 engines.

The 1967 AC Cobra MK III with chassis number COB 6124 was offered for sale at the 2006 RM Auction in Monterey, Ca where it was offered without reserve and estimated to sell between $350,000-$450,000. All of the series MK III were right hand drive and were powered by Ford's 289. There were only twenty six examples built and this was the third from the last one created. It was constructed in 1967 and delivered in 1968. It is finished in Guardsman Blue with a black interior. Victoria Motor Works of Godalming, Surrey, UK sold this vehicle to Robert Hewitt. It passed through a few other owners before being sent to an American collector residing in Illinois. It then passed through a few more owners before finding its way to the RM Auction in Monterey, CA. It found a new owner at the price of $275,000.
The formula for the success of the Cobra came through a man named Carroll Shelby adapting a powerful Ford engine into a nimble, British sports car.
A.C. Cars of Thames Ditton in Surrey, England had been producing the Ace since 1954. It was designed by John Tojeiro and featured an independent suspension by transverse leaf springs. The tubular frame body of the vehicle took its styling cues from Ferrari. The original engine used in the Ace was a 1991 cc, over-head-cam engine designed by John Weller, the founder of AC, in the 1920s. In 1956, an optional Bristol engine became available. This was a BMW derived, 1971 cc six-cylinder engine that was capable of producing 125 horsepower. With the Bristol engine, the Ace captured many victories on the race tracks around the world. It even won the SCCA Class E championship three years in a row.

In 1959, Bristol ceased its six-cylinder engine production. When Bristol stopped supplying A.C. with the engine, the production of the Ace ceased. Carroll Shelby quickly negotiated a deal where A.C. would supply him with the chassis. Now all Shelby needed was an appropriate engine. In 1961, Ford introduced the 221 cubic-inch small block engine. This was a new lightweight, thin wall-cast, V8 engine that produced 164 horsepower. Shelby approached Ford about the use of the engine for the 2-seat sports car. Ford agrees.

In February of 1962, a 260 HiPo engine and Borg-Warner four-speed manual gearbox was fitted into the aluminum-bodied Cobras. The AC Shelby Ford Cobra was complete.

In April of 1962, the first Cobra with chassis CSX 2000 was painted yellow and shipped to the New York Auto Show where it appeared on the Ford display. The vehicle was an instant success and attracted much attention. Orders came faster than Shelby could build. The prototype CSX 2000 was continuously being repainted for magazine reviews. The purpose was to create an illusion that more Cobras existed.

In 1963 the engine size increased to 289 cubic-inches. Rack-and-pinion steering was added to the vehicle.

Two Cobras were entered into the grueling 24-Hours of Le Mans endurance race. Carroll Shelby himself drove one of the vehicles. Ford had refused to provide an engine so Shelby, with the help of A.C. cars and Ed Hugus, prepare the cars. One of the Cobras managed to capture a seventh place finish, a major accomplishment.

Dan Gurney became the first American driver to win an FIA race in an American car when he won the Bridgehampton 500KM race in September of 1963 while driving a Cobra.

In 1964, the Cobra returned to LeMans where it finished fourth overall and first in the GT class.

Near the end of 1964, the Cobra 427 was unveiled to the press. If featured a new tubular, aluminum body, coil spring chassis, and a 427 cubic-inch, 425 horsepower engine. The car was able to go from zero to 100 mph and back to zero in less than 14 seconds. This combination captured the FIA World Championship for Ford in 1965.

In 1965, Ford discontinued its support of Shelby's racing program and the Cobra 427 production ceased after only 160 vehicles had been produced. AC continued to produce the AC 289 until 1968.

In 1967, the last 427 Cobra was built and in 1968, the last 427 Cobra was sold by Carroll Shelby.

Ford had shifted their resources to the new GT40 and modified Mustang programs. In 1966, three GT-40 Mark II's crossed the finish line at Le Mans capturing first, second, and third.

1967 Shelby AC Cobra 289 MKIII

Year1967
MakeShelby
ModelAC Cobra 289 MKIII
Engine LocationFront
Drive TypeRear Wheel
Production Years for Series1965 - 1968
Combined MPG0.00

Chassis / Engine Numbers Shown
Chassis NumberCOB 6124

Engine  
Engine ConfigurationV
Cylinders8
Aspiration/InductionNormal
Displacement289.00 CU IN. | 4736.7 cc. | 4.7 L.
ValvetrainOHV
Horsepower325.00 HP (239.2 KW)
HP / Liter69.1 BHP / Liter
Fuel TypeGasoline - Petrol
Fuel FeedCarburetor
4 Weber dual-throat 481DA carburetor

Standard Transmission
Gears4
TransmissionManual


 
View Specifications
Similar Automakers
Add Review
Other models by Shelby
AddThis Social Bookmark Button

Related Articles and Event Coverage
Monterey Sports & Classic Car Auction

1967 Shelby models
Cobra 427

Vehicle Spotlight
Ford Ka TattooFord Ka Digital ArtFord Ka Grand Prix
Pininfarina B0 ConceptFord Kuga Show CarVenturi Volage Concept
Nissan Nuvu EV ConceptAudi A1 Sportback ConceptRenault Megane Trophy
Renault Z.E. ConceptRenault Mégane CoupéBMW X1 Concept
2009 Lotus Exige Cup 260Lamborghini Estoque ConceptLancia Ypsilon VERSUS Concept
Volkswagen Pickup ConceptPeugeot Prologue ConceptSpyker C8 Laviolette LM85
Peugeot 908 HYCitroen Hypnos Hybrid ConceptRenault Ondelios Concept
Chevrolet Orlando ConceptMazda Kiyora ConceptMazda Kazamai Concept