| |
|
|
The Nash Metropolitan was produced from 1954 through 1962. In 1954 the Nash-Kelvinator Corporation merged with Hudson Motor Car Company to form the American Motors Corporation (AMC). It was the largest corporate merger in the United States history up to that point.
When most other automobile manufacturers of the time were creating large automobiles, the Nash Motor Company set out to produce a small, economical, fuel-efficient vehicle. A concept car was created to gauge public reaction. This concept was the NXI, known as the Nash Experimental International, builit by William J. Flajole. After a number of positive reviews and interest in the vehicle, the decision was made to produce the vehicle. Additional research revealed that it would be more cost-effective to produce the vehicle overseas using existing mechanical components rather than to invest in tooling costs in the United States. After searching and negotiation, the production was handed over to Austin of England. In October of 1953 production began at Austin's Longbridge factory. Bodywork was handled by Fisher & Ludlow. Final assembly was by the Austin Motor Company.
The Nash Metropolitan was available in two body-styles, a hardtop or convertible. They rested on an 85-inch wheelbase and weighed just 1800 lbs. Power was from the Austin four-cylinder A-series engine which sent the power through a three-speed manual gearbox to the rear wheels. A change was made to the B-series engine after 10,000 examples had been produced.
In 1956 the Metropolitan was redesigned and the engine capacity was enlarged from 1200cc to 1500cc. Two-tone paint schemes and chrome trim could now be found on the exterior. The non-functional hood scoop was removed.
Power was again improved in 1959, now reaching 55 horsepower. This was also the year that had its greatest number of sales for any given year.
Production continued until 1961 though there were still enough product to continue sales until March of 1962. In total, 95,000 examples of the Metropolitan had been sold to US Customers. About 9,400 examples were sold to United Kingdom customers.
When most other automobile manufacturers of the time were creating large automobiles, the Nash Motor Company set out to produce a small, economical, fuel-efficient vehicle. A concept car was created to gauge public reaction. This concept was the NXI, known as the Nash Experimental International, builit by William J. Flajole. After a number of positive reviews and interest in the vehicle, the decision was made to produce the vehicle. Additional research revealed that it would be more cost-effective to produce the vehicle overseas using existing mechanical components rather than to invest in tooling costs in the United States. After searching and negotiation, the production was handed over to Austin of England. In October of 1953 production began at Austin's Longbridge factory. Bodywork was handled by Fisher & Ludlow. Final assembly was by the Austin Motor Company.
The Nash Metropolitan was available in two body-styles, a hardtop or convertible. They rested on an 85-inch wheelbase and weighed just 1800 lbs. Power was from the Austin four-cylinder A-series engine which sent the power through a three-speed manual gearbox to the rear wheels. A change was made to the B-series engine after 10,000 examples had been produced.
In 1956 the Metropolitan was redesigned and the engine capacity was enlarged from 1200cc to 1500cc. Two-tone paint schemes and chrome trim could now be found on the exterior. The non-functional hood scoop was removed.
Power was again improved in 1959, now reaching 55 horsepower. This was also the year that had its greatest number of sales for any given year.
Production continued until 1961 though there were still enough product to continue sales until March of 1962. In total, 95,000 examples of the Metropolitan had been sold to US Customers. About 9,400 examples were sold to United Kingdom customers.
1960 Nash Metropolitan |
|
| Year | 1960 |
| Make | Nash |
| Model | Metropolitan |
| Engine Location | Front |
| Drive Type | Rear Wheel |
| Production Years for Series | 1954 - 1962 |
| Weight | 1850 lbs | 839.2 kg |
| Combined MPG | 0.00 |
| Chassis / Engine Numbers Shown | |
| Chassis Number | 82940 |
| Engine | |
| Engine Configuration | I |
| Cylinders | 4 |
| Aspiration/Induction | Normal |
| Displacement | 90.90 CU IN. | 1489.9 cc. | 1.5 L. |
| Valves | 8 valves. 2 valves per cylinder. |
| Valvetrain | OHV |
| Horsepower | 50.00 BHP (36.8 KW) @ 4250.00 RPM |
| HP to Weight Ratio | 37.0 LB / HP (Vehicles with similar ratio) |
| HP / Liter | 33.3 BHP / Liter |
| Compression Ratio | 8.30:1 |
| Fuel Type | Gasoline - Petrol |
| Fuel Feed | Carburetor |
| 1 Zenith carburetor | |
| Vehicles with similar horsepower and weight | |
| Standard Transmission | |
| Gears | 3 |
| Transmission | Manual |
| Final Drive | 4.22:1 |
| Similar Automakers |
| Add Review |
| Nash History |
| Other models by Nash |
| View Specifications |
 |
| Vehicle Ratings |
| Rate the Vehicle |
| Add Review |
| Articles and Event Coverage |
| PVGP Car Show |
| Additional Resources and Links |
| Pittsburgh Vintage Grand Prix Car Show Official Website |
| Other Model Years |
| 1959 Metropolitan |
| 1957 Metropolitan |
| 1954 Metropolitan |
| Recent Vehicle News | ||
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
Conceptcarz.com
| Site Map
| Contact
| Terms Of Use | Links | RSS
| Top
Automobile information, history, and statistics from concept to production. | © 1998-2008 Conceptcarz.com
Automobile information, history, and statistics from concept to production. | © 1998-2008 Conceptcarz.com