|
|
|
|
|
|
|
|
 | | View more photos Berlinetta Coachwork: Vignale Chassis Num: 0226AT |
It was in 1948 when the newly formed Italian automobile company named Ferrari began selling a promising sports car named the 166. The two seater sports car featured a 12-cylinder engine mounted in the front and supplying over 100 horsepower to the rear wheels. The engine was just under two-liters in size and had a unitary displacement of 166 cc, thus, the evolution of the model name. Production would last until 1953 with only 38 examples being produced. Even though production was low, its accomplishments are large, with wins at LeMans, Mille Miglia, and the Targa Florio.
The 166 was a continuation of the 125, introduced a year earlier. The 125's size of 1497 cc was later enlarged to 1902cc, bringing about the Tipo 159. In 1948, it was enlarged to 1995 cc and became the 166.
Engineer Gioachino Colombo had been tasked with creating the engine to power the first Ferrari automobile. Both Enzo and Colombo had a history with working at Alfa Romeo, and were well versed on the rules and regulations of Grand Prix racing. Rules dictated that displacement size was limited to just 1.5-liters in forced induction engines, and 4.5-liters in naturally aspirated units. Colombo opted for the forced induction route, just as he had done while at Alfa Romeo, and designed for Ferrari their first V12 engine, as well as their first chassis. The engine was very different to the units Colombo had created while at Alfa Romeo, though sharing the same displacement size. Before the engine or chassis were ever created, Colombo left. Aurelio Lampredi was brought in to pick-up where Colombo had left off. Lampredi was a former Fiat employee who was a very talented and gifted engineer. He created the Colombo designed supercharged V12 engine, which would quickly grow in size to three liters.
The engine was potent, but still lacking. Lampredi was tasked with creating a new engine, larger in size, and aimed at propelling Ferrari's next generation of Grand Prix racing machines. Lampredi's goal was to create a powerful, yet fuel efficient engine that could keep with the competition. The Alfa Romeo engines were providing serious competition, and Lampredi questioned if the horsepower output could reach the figures Alfa Romeo was producing. Better fuel-efficiency, along with better tire wear, were two ways Lampredi was hoping to best the Alfa's.
The Lampredi designed 3.3-liter engine was ready by early 1950. Due to its size and configuration, it would eventually become known as the 'long-block' engine. It was constructed from a light-alloy metal, two valves per cylinder, single overhead camshaft and drew design inspiration from the prior Colombo engine.
Touring was tasked with creating the first two vehicles to house the Lampredi engines. They were entered in the 1950 Mille Miglia and carried the designation, 275 S, keeping with the traditional Ferrari naming scheme based on unitary displacement. The cars debut were less than stellar, as both were forced to retire prematurely due to tire and gearbox issues. As the year progressed, the issues were resolved and development continued on the engine, ultimately reaching 4.5-liters.
Other than being a very successful race car builder that enjoyed profound racing success, he was also a great business man and able to capitalize on racing success. Many of the road going cars Ferrari produced were derived from their racing program. Using the Lampredi engine, displacing 4.1 liters and producing 220 horsepower, the engine was mounted in a enlarged versions of the 275 S chassis, and the vehicle was named the 340 America. The 340 America's first public debut was at the Paris Auto Show where it was displayed wearing a Touring Barchetta body. a total of 23 examples would eventually be produced, with bodies supplied by Vignale, Touring and Ghia. As is popular with Ferrari automobiles, many of the 340 America's were used by privateers in racing competition.
Though rule changes at the close of hte 1951 season left the Lampredi engine obsolete, development continued. A total of six examples of the Ferrari 342 America were created. These were very exclusive machines catered to Ferrari's wealthiest clients. The 340 Mexico cars were true Ferrari racing bred machines. Four examples were specifically created to compete in the 1952 running of the Carrera Panamericana race. They were powered by a 280 horsepower version of the Lampredi engine and given a longer wheelbase to better traverse the rough and changing terrain.
In 1953, Ferrari introduced the 340 MM, which was a replacement for the 340 America. Under the bonnet was a 300 horsepower Lampredi engine.
The 166 was a continuation of the 125, introduced a year earlier. The 125's size of 1497 cc was later enlarged to 1902cc, bringing about the Tipo 159. In 1948, it was enlarged to 1995 cc and became the 166.
Engineer Gioachino Colombo had been tasked with creating the engine to power the first Ferrari automobile. Both Enzo and Colombo had a history with working at Alfa Romeo, and were well versed on the rules and regulations of Grand Prix racing. Rules dictated that displacement size was limited to just 1.5-liters in forced induction engines, and 4.5-liters in naturally aspirated units. Colombo opted for the forced induction route, just as he had done while at Alfa Romeo, and designed for Ferrari their first V12 engine, as well as their first chassis. The engine was very different to the units Colombo had created while at Alfa Romeo, though sharing the same displacement size. Before the engine or chassis were ever created, Colombo left. Aurelio Lampredi was brought in to pick-up where Colombo had left off. Lampredi was a former Fiat employee who was a very talented and gifted engineer. He created the Colombo designed supercharged V12 engine, which would quickly grow in size to three liters.
The engine was potent, but still lacking. Lampredi was tasked with creating a new engine, larger in size, and aimed at propelling Ferrari's next generation of Grand Prix racing machines. Lampredi's goal was to create a powerful, yet fuel efficient engine that could keep with the competition. The Alfa Romeo engines were providing serious competition, and Lampredi questioned if the horsepower output could reach the figures Alfa Romeo was producing. Better fuel-efficiency, along with better tire wear, were two ways Lampredi was hoping to best the Alfa's.
The Lampredi designed 3.3-liter engine was ready by early 1950. Due to its size and configuration, it would eventually become known as the 'long-block' engine. It was constructed from a light-alloy metal, two valves per cylinder, single overhead camshaft and drew design inspiration from the prior Colombo engine.
Touring was tasked with creating the first two vehicles to house the Lampredi engines. They were entered in the 1950 Mille Miglia and carried the designation, 275 S, keeping with the traditional Ferrari naming scheme based on unitary displacement. The cars debut were less than stellar, as both were forced to retire prematurely due to tire and gearbox issues. As the year progressed, the issues were resolved and development continued on the engine, ultimately reaching 4.5-liters.
Other than being a very successful race car builder that enjoyed profound racing success, he was also a great business man and able to capitalize on racing success. Many of the road going cars Ferrari produced were derived from their racing program. Using the Lampredi engine, displacing 4.1 liters and producing 220 horsepower, the engine was mounted in a enlarged versions of the 275 S chassis, and the vehicle was named the 340 America. The 340 America's first public debut was at the Paris Auto Show where it was displayed wearing a Touring Barchetta body. a total of 23 examples would eventually be produced, with bodies supplied by Vignale, Touring and Ghia. As is popular with Ferrari automobiles, many of the 340 America's were used by privateers in racing competition.
Though rule changes at the close of hte 1951 season left the Lampredi engine obsolete, development continued. A total of six examples of the Ferrari 342 America were created. These were very exclusive machines catered to Ferrari's wealthiest clients. The 340 Mexico cars were true Ferrari racing bred machines. Four examples were specifically created to compete in the 1952 running of the Carrera Panamericana race. They were powered by a 280 horsepower version of the Lampredi engine and given a longer wheelbase to better traverse the rough and changing terrain.
In 1953, Ferrari introduced the 340 MM, which was a replacement for the 340 America. Under the bonnet was a 300 horsepower Lampredi engine.
| Carrera PanamericanaThe Carrera Panamericana was raced from 1950 through 1954. It was held on open roads in Mexico that ran from a southern Mexican west-coast city towards Texas. The race was formed to celebrate the competition of the Panamerican Highway. It was a multi-staged race across the country that counted towards the World Sportscar Championship. The race saw entrants from factory teams, privateers, and amateurs. On average, only one-third of the entrants were able to finish the race. The race was canceled after the 1955 LeMans fatal disaster, where a car went into the crowd killing over 80 spectators. The fatal accident by Bill Vukovick at Indianapolis secured the decision to no longer run the race. The first cars to run the race had top speeds of around 100 mph. By 1954, the cars were easily running at 170 mph. The vehicles were not adequately designed to protect the drivers at speeds this great. Being run on open roads meant that many areas of the course could not be managed; live stock, people, obstacles, and a number of other scenarios could make their ways into the road and cause disaster. The decision to cancel the race was sad, but necessary. |
1952 Ferrari 340 Mexico Vignale |
|
| Year | 1952 |
| Make | Ferrari |
| Model | 340 Mexico Vignale |
| Body Style | Berlinetta |
| Engine Location | Front |
| Drive Type | Rear Wheel |
| Body / Chassis | Steel body on tubular steel frame |
| Production Years for Series | 1952 |
| Coach Work | Vignale |
| Weight | 900 kg | 1984.5 lbs |
| Combined MPG | 0.00 |
| Chassis Range | 0222 - 0228 |
| Chassis / Engine Numbers Shown | |
| Chassis Number | 0226AT |
| Engine | |
| Engine Configuration | V |
| Cylinders | 12 |
| Aspiration/Induction | Normal |
| Displacement | 4101.00 cc | 250.3 cu in. | 4.1 L. |
| Valvetrain | SOHC |
| Horsepower | 280.00 BHP (206.1 KW) @ 6600.00 RPM |
| HP to Weight Ratio | 7.1 LB / HP (Vehicles with similar ratio) |
| HP / Liter | 68.3 BHP / Liter |
| Compression Ratio | 8.4:1 |
| Vehicles with similar horsepower and weight | |
| Standard Transmission | |
| Gears | 5 |
| Transmission | Manual |
| View more photographs |
| View Specifications |
| Similar Automakers |
| Add Review |
| Other models by Ferrari |
 |
| Related Articles and Event Coverage |
| Pebble Beach Concours d'Elegance |
| 1952 Ferrari models |
| 212 Export Barchetta |
| 212 Inter Ghia |
| 212 Inter Vignale |
| 212 Speciale |
| 212/225 Inter |
| 225 Inter Vignale Coupe |
| 225 Spyder Sport |
| 250 S |
| 340 America |
| 342 America |
| 500 F2 |
| Vehicle Spotlight | ||
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
