1962 Monaco  |
 |  |  |  |  |
 |  |  |  |  |
1961 Cooper Monaco Type 61 news, pictures, and information | ||
| Tweet | ||
 |  |  | Sports Racer Chassis Num: CM/3/62 |
| Sold for $232,000 at 2007 Bonhams. | |||
Peter Bloore Raceparts of the UK owned the car from 1990-1998. John Harper purchased it in 1998 and began a two-year restoration which brought it back to the original Alan Connell specification. It is now fitted with a 2.5-liter Climax engine and five-speed transaxle. It is painted in dark blue livery with white number roundels.
The engine has only been put through its paces on one occasion - the 2006 Goodwood Revival Meeting, where it placed third overall. Needless to say, it is a very capable car that is in pristine condition.
The Cooper Monaco series were introduced for the 1959 racing season. The Cooper-Climax 'Bobtail' Sports Cars were shown in 1955, featuring a seat positioned in the center of the cockpit, and most were fitted with all-enveloping bodywork. They did well during the 1955 and 1956 seasons. They were followed by an open-wheeled, single-seat Formula 2 car. Power was from a 1500cc Climax engine. Further improvements lead to a Formula 1 car, with Jack Brabham driving the works car during the 1957 season. The small, 1.96-liter car held its own against the larger 2.5-liter F1 cars during the Monaco Grand Prix. For 1958, a Cooper-Climax monoposto with an enlarged engine, driven by Maurice Trintignant, won the Monaco Grand Prix. To celebrate this accomplishment, the new sports-racing Cooper-Climax was dubbed the 'Monaco.' Jack Brabham would skillfully pilot the marque's car to a second consecutive victory at Monaco and capture the Formula 1 World Championship in 1959.
The first version of the Monaco featured a short chassis. The 1960-1961 version had changes to the bodywork and to the dimensions. It was given a longer-wheelbase and a multi-tubular frame. The suspension was re-worked with coil-springs and telescopic shock absorbers. The Owen Maddock designed body became sleeker.
Many of the Monaco's were fitted with four-cylinder Climax FPF engines. Sizes included 2.0, 2.5, and 2.7-liters. Many of the cars sent to the United States, in true Detroit fashion, were given V8 engines from Ford and GM. Even Carroll Shelby got in on the action, equipping his factory team with Ford V8-engined 'King Cobras.'
The original owner of this car was Alan Connell of Fort Worth, Texas. It sold for £1,650 and was equipped with a Climax FPF engine. While in his care, the car was campaigned in both 2.9 and 2.5-liter Climax form.
It was brought to Sebring in 1963 but its 2.5-liter Climax engine failed. Mechanic Adrian Flores fitted a small-block Chevrolet V8 engine in its place and apparently powered the rear wheels through the Cooper C5S gearbox. Wider wheels were added which required the wheel arches to become flared. The nose was enlarged to accommodate the intake for the radiator.
In 2007 it was brought to Carmel, California where it was offered for sale at Bonhams auction, An Important Sale of Collectors' Motorcars and Automobilia, and sold for $232,000 plus premiums and taxes.
By Daniel Vaughan | Apr 2008
 |  | Sports Racer |
The car retains its original chassis, which may have been one of the very last Monacos of its type ever to leave the Cooper factory. The car originally had a 'pointed fin' 1961-type Monaco Mark III bodyshell but may not have been completed in 1961 as a running car. It may have been retained as an uncompleted chassis/body unit and put into storage. A later owner completed the car to running order fitted the Mark II bodywork which it wears today.
In 2009, this Mark III Monaco was offered for sale by Bonhams Auction at the Quail Lodge Resort and Golf Club in Carmel, CA. It was estimated to sell for $170,000 - $210,000. The lot was leave the auction unsold.
By Daniel Vaughan | Nov 2009
Sports car racing had been slowly growing in popularity since the conclusion of the Second World War. As the 1950s were coming to a close, the interest in the sport began to peak. Competition had grown and designs had became perfected. Cooper began work on their racer in 1958, with the intention of competing during the 1959 season. The resulting vehicle was named the Monaco, in honor of Trintignant's accomplishments at that race in 1958. A Cooper Monaco prototype was displayed at Hollyfield in November of 1958.
Sports car racing requirements at the time stated one working door, and two seats, along with a host of other requirements. They had to comply with FIA regulations used in Europe and built solely for racing. Superchargers were not allowed; the use of superchargers bumped the car into another class. The vehicles engine size determined its racing class.
The Cooper Monaco chassis was much up of four large tubes resting on a wide wheelbase. The engine bay was designed to accept a variety of engines, such as the Bristol engines which had been used in Cooper's open-wheeled Formula racing cars. As competition increased from other marques such as Lotus, Cooper continued to refine their Monaco by giving them more rigid frames, improved suspension, engine modifications, and continued to perfect the design. The Monaco and the Cooper Formula cars shared many similarities and mechanical components in an effort to minimize problems during development and to streamline the building process.
The spaceframe chassis was designed for a mid-engine layout with seating for two. The rear-mounted engine meant no central transmission tunnel was needed which helped in weight reduction and allowing for more power to reach the rear wheels. A Citroen-ERSA four-speed transaxle with was mated to the 1.5- or 2.0-liter FPF engines. The engines were mounted at an 18-degree angle and attached via four points on rubber bushings. The 12-gallon aluminum fuel tank was mounted outboard on the left side of the chassis rails. The driver and outboard battery were located on the right-hand side. This configuration was chosen to keep the driver as far away from the fuel source as possible, and to distribute the weight more evenly.
The rack-and-pinon steering was centrally located. The front suspension as comprised of double wishbones and coil springs and damper units. In the rear was the tried-and-true transverse leaf-spring setup with a single lower wishbone. Girling disc brakes were at all four corners and measured 10.25 inches in diameter.
The entire package had a wheelbase of 91 inches with a length of 141-inches. As expected, the weight of the vehicle was pretty well distributed, with 44% in the front and 56% in the rear.
The Cooper Monaco's immediately dominated the racing circuit and eventually became one of the most successful mid-engined sports racing cars ever constructed. When introduced, Cooper did not plan on running any works cars. The first few examples sold were tax-free kit cars. In total, eight examples were registered in 1959, each with unique specifications and purposes.
The Cooper Monaco MKII Type 57 was raced during the 1960 season and was nearly identical to the MKI, except for a longer nose. The MKII was produced in smaller quantities and most were sold in Britain where they provided many podium finishes for their drivers.
In 1961, Cooper introduced their third iteration of the Monaco, the Monaco MKIII Type 61. BY now, the Monaco was basically a Formula 1 car in two-seater configuration. These versions had straights tubes in the frame, replacing the curves and angles, and similar to the Lowline Formula 1 cars. There was a wide radiator intake. The suspension was improved with the use of coil springs and wishbones at the rear; this was the first time a production Cooper car would contain this setup. To improve aerodynamics and to appeal to the American market, the cars were given tail fins and a slightly revised body.
There were three Monaco Mark III's registered, including the prototype machines. One went to Roger Penske, another went to Texan Hap Sharp, and the third was sold to British privateer Peter Berry.
In 1963, Carroll Shelby's Cobras were doing very well in SCCA Competition. They won the A/Sports Racing National Championship and US Road Racing Championship. Though these street-derived Mustang Cobra vehicles were fast, they could not compete with the USAC-sanctioned 'Fall Series' held on the West Coast. This series would eventually evolve into the Canadian American Challenge Series (CAN-AM), which had little rules and restrictions resulting in high horsepower cars with lightweight, aerodynamic bodies, large wings and tires.
Carroll Shelby had all of the ingredients to compete in the Fall Series, except the car. He used his connections in England to resolve that problem. He approached John Cooper in search of finding a car that could house a 289 cubic-inch Ford V8 engine. Cooper had enjoyed great success with his mid-engined Coventry Climax-powered sports cars, and their successor, the Monaco. Charles Cooper and his son John, had created a series of non-production car based sports racing cars using a multi-tubular chassis designed to hold Bristol engines. From this, other series cars were constructed. There was potential in the 1100cc Coventry Climax FWA engines, due to their lightweight construction, power, and durability. In 1955, a lightweight and aerodynamic body was constructed to house these engines. These sports-racers were known as 'Bobtails'. The Monaco cars were further evolutions of the Bobtails.
Shelby purchased two cars, CM/1/63 and CM/3/63 and powered them with an American cast-iron V8 engine. The engines featured four dual chock downdraft Weber carburetors and matted to a BMC/Hufaker four-speed transaxle. The gearbox proved to be problematic, so it was replaced by a Colotti four-speed unit, which, too, was not without its problems. The body was constructed of aluminum and clothed the 1.5-inch 18 gauge tubing and full independent suspension with coil springs and shock absorbers. They were delivered early in the season but they were not completed until the close of the USRRC season.
Carroll Shelby nicknamed these cars, the 'Cooper Ford', which persisted until it was replaced by Steve Smith of Car & Driver who thought up the name 'King Cobra'. This was the perfect name for these newly created sports-racers.
By Daniel Vaughan | Jun 2007
For more information and related vehicles, click hereSports car racing requirements at the time stated one working door, and two seats, along with a host of other requirements. They had to comply with FIA regulations used in Europe and built solely for racing. Superchargers were not allowed; the use of superchargers bumped the car into another class. The vehicles engine size determined its racing class.
The Cooper Monaco chassis was much up of four large tubes resting on a wide wheelbase. The engine bay was designed to accept a variety of engines, such as the Bristol engines which had been used in Cooper's open-wheeled Formula racing cars. As competition increased from other marques such as Lotus, Cooper continued to refine their Monaco by giving them more rigid frames, improved suspension, engine modifications, and continued to perfect the design. The Monaco and the Cooper Formula cars shared many similarities and mechanical components in an effort to minimize problems during development and to streamline the building process.
The spaceframe chassis was designed for a mid-engine layout with seating for two. The rear-mounted engine meant no central transmission tunnel was needed which helped in weight reduction and allowing for more power to reach the rear wheels. A Citroen-ERSA four-speed transaxle with was mated to the 1.5- or 2.0-liter FPF engines. The engines were mounted at an 18-degree angle and attached via four points on rubber bushings. The 12-gallon aluminum fuel tank was mounted outboard on the left side of the chassis rails. The driver and outboard battery were located on the right-hand side. This configuration was chosen to keep the driver as far away from the fuel source as possible, and to distribute the weight more evenly.
The rack-and-pinon steering was centrally located. The front suspension as comprised of double wishbones and coil springs and damper units. In the rear was the tried-and-true transverse leaf-spring setup with a single lower wishbone. Girling disc brakes were at all four corners and measured 10.25 inches in diameter.
The entire package had a wheelbase of 91 inches with a length of 141-inches. As expected, the weight of the vehicle was pretty well distributed, with 44% in the front and 56% in the rear.
The Cooper Monaco's immediately dominated the racing circuit and eventually became one of the most successful mid-engined sports racing cars ever constructed. When introduced, Cooper did not plan on running any works cars. The first few examples sold were tax-free kit cars. In total, eight examples were registered in 1959, each with unique specifications and purposes.
The Cooper Monaco MKII Type 57 was raced during the 1960 season and was nearly identical to the MKI, except for a longer nose. The MKII was produced in smaller quantities and most were sold in Britain where they provided many podium finishes for their drivers.
In 1961, Cooper introduced their third iteration of the Monaco, the Monaco MKIII Type 61. BY now, the Monaco was basically a Formula 1 car in two-seater configuration. These versions had straights tubes in the frame, replacing the curves and angles, and similar to the Lowline Formula 1 cars. There was a wide radiator intake. The suspension was improved with the use of coil springs and wishbones at the rear; this was the first time a production Cooper car would contain this setup. To improve aerodynamics and to appeal to the American market, the cars were given tail fins and a slightly revised body.
There were three Monaco Mark III's registered, including the prototype machines. One went to Roger Penske, another went to Texan Hap Sharp, and the third was sold to British privateer Peter Berry.
In 1963, Carroll Shelby's Cobras were doing very well in SCCA Competition. They won the A/Sports Racing National Championship and US Road Racing Championship. Though these street-derived Mustang Cobra vehicles were fast, they could not compete with the USAC-sanctioned 'Fall Series' held on the West Coast. This series would eventually evolve into the Canadian American Challenge Series (CAN-AM), which had little rules and restrictions resulting in high horsepower cars with lightweight, aerodynamic bodies, large wings and tires.
Carroll Shelby had all of the ingredients to compete in the Fall Series, except the car. He used his connections in England to resolve that problem. He approached John Cooper in search of finding a car that could house a 289 cubic-inch Ford V8 engine. Cooper had enjoyed great success with his mid-engined Coventry Climax-powered sports cars, and their successor, the Monaco. Charles Cooper and his son John, had created a series of non-production car based sports racing cars using a multi-tubular chassis designed to hold Bristol engines. From this, other series cars were constructed. There was potential in the 1100cc Coventry Climax FWA engines, due to their lightweight construction, power, and durability. In 1955, a lightweight and aerodynamic body was constructed to house these engines. These sports-racers were known as 'Bobtails'. The Monaco cars were further evolutions of the Bobtails.
Shelby purchased two cars, CM/1/63 and CM/3/63 and powered them with an American cast-iron V8 engine. The engines featured four dual chock downdraft Weber carburetors and matted to a BMC/Hufaker four-speed transaxle. The gearbox proved to be problematic, so it was replaced by a Colotti four-speed unit, which, too, was not without its problems. The body was constructed of aluminum and clothed the 1.5-inch 18 gauge tubing and full independent suspension with coil springs and shock absorbers. They were delivered early in the season but they were not completed until the close of the USRRC season.
Carroll Shelby nicknamed these cars, the 'Cooper Ford', which persisted until it was replaced by Steve Smith of Car & Driver who thought up the name 'King Cobra'. This was the perfect name for these newly created sports-racers.
By Daniel Vaughan | Jun 2007
| Grand Prix Circuits: Pau Circuit | |
 | Some grand prix circuits just have a mythical status about them. Besides the drivers and great races, a lot of the equation comes down to how memorable the circuit truly is. In the case of the Pau Circuit, its sheer place in motorsport history and lore makes this tight, twisting circuit a true legend. From its very beginnings, Pau would be at the heart of travel and transportation. Situated in a rather deep valley with the Pyrenees mountains lending an imposing back-drop, the area that would ...[Read more...] |
| 1970 Monaco Grand Prix: A Reversal of Fortunes | |
 | In gambling and sports there is one word that seems to be absolutely foundational to both—luck. Heading into the 1970 season Jack Brabham had had his share of luck. Jochen Rindt, on the other hand, seemed to have none of it. This would all change on the 10th of May, 1970. Jochen Rindt had come into Formula One during the mid-1960s and was certainly fast straight-away. Often one of the quickest drivers on the circuit, Rindt would find his choice of teams to be his biggest letdown as the reliab...[Read more...] |
| 1962 Monaco Grand Prix: McLaren Carries the Cooper Flag back to the Top | |
 | By the beginning of the 1962 Formula One season Jack Brabham had left Cooper to form his own racing team. It seemed the glories days of the double World Championship were well and truly behind them. However, left in Brabham's stead would be a man very akin to the Australian in so many ways. And in Bruce McLaren, Cooper had a driver and competitor more than apt to help carry the team forward into the future. The first race of the 1962 season, the Grand Prix of the Netherlands, certainly didn't...[Read more...] |
| Peter Brock and Bob Bondurant to Swap Shelby Stories at Rolex Monterey Motorsports Reunion | |
 | Two stalwart names in the colorful history of Shelby American, Peter Brock and Bob Bondurant, will share some of their stories of those early years at the Picnic with Shelby Cobra Saturday, August 18 at the Rolex Monterey Motorsports Reunion. The 30-minute picnic begins at 12:15 p.m. in the Ford Motor Company display, located at Mazda Raceway Laguna Seca's Yamaha Marketplace. Peter Brock was instrumental in Shelby American beginning in 1962. As a young designer, he dove into the entire design...[Read more...] |
| Shelby Heritage Display Features Rarest of the Rare at Rolex Monterey Motorsports Reunion | |
 | Complementing the impressive number of authentic competition Shelby Cobras thundering around the circuit in their dedicated race group (3A) at this year's Rolex Monterey Motorsports Reunion, August 17-19, will be a collection of unequalled magnitude at Ford Motor Company's onsite Shelby Cobra Heritage Display. The Rolex Monterey Motorsports Reunion at Mazda Raceway Laguna Seca is a cornerstone, along with the famed Pebble Beach Concours d'Elegance, of Monterey Classic Car Week. The event is ...[Read more...] |
| View more Sports Racer vehicles |
 1961
Cooper
models |
| Cooper Kimberly T54 |
| Cooper T-56 FJ |
| Cooper T53 |
| Cooper T55 |
| Cooper: 1961-1970 |
| Similar Automakers |
| Other models by Cooper |
| Related Articles and Event Coverage |
| Bonhams - Quail Lodge Resort and Golf Club |
| Bonhams, An Important Sale of Collectors' Motorcars and Automobilia |
| Monaco T-56 T24 T51 T53 |
| 1962 Monaco |
