conceptcarz.com

1967 Chevrolet Camaro

The Chevrolet Camaro has roots that date back to 1962 when then-Chevy design chief Irv Rybicki suggested a small 'personal car' based on the Chevy II. At this point in history, Chevy had a wide and diverse lineup, and General Manager Semon 'Bunkie' Knudsen was unconvinced, feeling that the Corvair, Chevy II, and the upcoming Chevelle had the bases well covered. Undeterred, Rybicki continued to work on proposals, and his 'Super Nova' was introduced to the 1964 New York Auto Show, a few weeks prior to the Mustang's introduction. After 100,000 Mustangs had been sold, firmly establishing the pony car market, GM management was eager to revisit the Super Nova proposal. The rush was on to develop a pony car in less than two years. Other history states that the Camaro was designed as a replacement for the rear-engine Corvair and not a belated General Motors response to Ford's Mustang. Either way, the Corvair needed a replacement and the Mustang needed a Chevy contender.

The Chevy Camaro had a similar unibody design and mechanical setup as the second-generation Chevy II. There was a stub frame ahead of the cowl (a unibody structure from the windshield and firewall back), an independent front suspension with double A-arms from the Chevelle, and the single-leaf rear springs from the Chevy II. For 1967, the engines and transmissions were from the company catalog, with seven engine options, ranging from a 230 cubic-inch, 140 horsepower six to a 396 cubic-inch, 375 bhp V8. A myriad of transmission and axle ratios were available to suit a wide range of driving needs and conditions. The exterior could be changed, customized, and enhanced with a Style Trim Group consisting of chrome and stripes. Additionally, there was the Rally Sport option with disappearing headlamps and special taillights.

From its debut in late 1966, the Camaro was value-priced from just $2,466 for the basic six-cylinder hardtop coupe and available with a wide range of option packages. The large engine bay could accommodate the thrifty sixes and lightweight small-blocks all the way up to the Mark IV big-blocks.

Introduced on September 12th of 1966, the Chevy Camaro was available as a convertible or a coupe. Nearly 221,000 examples were sold, with about a quarter being soft tops; three quarters were V8s. By now, sales of the Ford Mustang had begun to stall, reflecting the greater variety of competitors in an increasingly diluted and crowded market for sporty personal cars in America. The showroom battle would soon be taken to the track, but first, they needed to homologate their racing contenders for competition. Vince Piggins was instrumental in the development of GM Division's new SCCA Trans-Am racing contender, the RPO (Regular Production Option) Z/28 option package which was quietly introduced for the Camaro in 1967.

The Z/28 option ($458.15) was powered by a high-revving small-block V-8 engine with the same basic dimensions of the 327-cylinder block and 283 crankshafts to produce 302 cubic inches. Race-bred improvements and highly developed underpinnings maximized the Z/28's power output, handling, and performance. Penske Racing successfully campaigned all-out Z/28 racing versions, piloted by Mark Donohue to back-to-back SCCA Trans-Am championships in 1968 and 1969, competing against stiff competition from Bud Moore and Shelby-prepped Mustangs.

Along with a successful Trans-Am campaign, the Camaro did well at the drag strip, being a solid 14-second car in stock trim with low-13s achieved with narrow slicks, lower rear-end gears (3.73:1 standard), open headers, and expert tuning. One of the famously prepared cars of the era was Dave Strickler's Bill Jenkins-prepped 'Old Reliable' Z/28 which ran 11.70s in Super Stock trim, capturing the 1968 NHRA Super Stock World Championship.

In 1962, General Motors had issued a company-wide edict prohibiting the use of engines larger than 400 CID in their production sports cars. A handful of custom builders swapped the small-block 350 CID stock motor for something more powerful. One such tuner was Southern California race car engineer Bill Thomas who installed the 427 CID Chevy L72 crate motor into a Camaro before the model officially went on sale. His sponsored driver, drag racer Dick Harrell, soon teamed with Chicago dealership Nickey Chevrolet to produce a small series of similarly modified cars.

Nickey later backed out of the agreement, so Harrell approached his old friend, Don Yenko, the owner of a Chevrolet dealership in Canonsburg, Pennsylvania. Yenko had participated in road racing and tuning throughout the 1950s and early 1960s, most famously with a dealer-modified Corvair known as the Yenko Stinger. In 1966, Yenko had applied for SCCA approval of the Corsa Corvair for racing. The sanctioning body permitted the cars with the back seat removed and upgrades to the Corsa engine, thereby increasing horsepower and torque. A total of 100 examples of the 1966 Corvair Corsa received certification and were all painted white with blue striping, and were called the Yenko Stinger. When the Corvair was discontinued, Yenko needed a Chevy product that could fill the void. Harrell's proposal for the big-block Camaro perfectly suited his needs.

A handful of Camaros were delivered to Yenko with Chevy's small-block 350 CID motor, which was then swapped out in Yenko's shop for a new 427 CID L72 engine. Other modifications included a lower gauge package under the center stack, a Stewart Warner tachometer, exhaust headers, and '427' numerals installed on the hood or front fenders. Some cars received a custom-created fiberglass stinger-style hood, modeled after the one the 1967 Corvette wore. Each completed car was given a stock number, bearing a YS (for Yenko Sportscars) followed by a 7 (representing the 1967 model year) and then two digits, representing the car's sequence number. Other Chevrolet dealerships as far away as Utah and Oklahoma to Ontario, Canada, could take and place orders for these special Camaros. The 396 CID Turbo-Jet V-8 that GM made available in Camaros later in the model year was more compatible with the L72 motor, so Yenko soon began ordering the big-block Super Sports, salvaging their cylinder heads and carburetors, and re-mounting them on the L72's short block. Roughly 54 examples of the modified Yenko Camaro's were produced for the 1967 model year.

In 1969, Yenko utilized Chevrolet's Central Office Production Order COPO system to have L72 engines installed into Chevrolet Camaros, Chevelles, and Novas on the factory assembly lines.

Chevrolet offered various combinations and performance packages on the Camaro, but due to their late arrivals, the Super Sport and Rally Sport packages were not well advertised in 1967, and very few were produced. The Rally Sport had hideaway headlights, and the SS came with Camaro's new 325 horsepower. They could be ordered separately or together. As one-period advertisement proclaimed, 'Take a Camaro sport coupe or convertible. Make it a Rally Sport with hideaway headlights. Make it an SS with Camaro's new 325-horsepower engine. Or both: SS with Rally Sport equipment.'


by Daniel Vaughan | Feb 2020

Related Reading : Chevrolet Camaro History

The Chevrolet Camaro was introduced in 1967 as a compact car specifically built to provide competition for the highly popular Ford Mustang. This pony car was built atop of the same F-Body platform as the Pontiac Firebird, which had a similar production lifespan of 1967 through 2002. During the preproduction stages of the Chevrolet Camaro, General Motors codenamed the vehicle Panther. The name....
Continue Reading >>

1967 Chevrolet Camaro Vehicle Profiles

Recent Vehicle Additions

Performance and Specification Comparison

Price Comparison

1967 Camaro
$3,310-$25,580
1967 Chevrolet Camaro Price Range: $2,500 - $3,310

Compare: Lower | Higher | Similar

Other 1967 Chevrolet Models

Camaro Generation 1

Specification Comparison by Year

Year
Production
Wheelbase
Engine
Prices
220,906
108.10 in.
8 cyl., 263.00 CID., 195.00hp
8 cyl., 327.00 CID., 210.00hp
8 cyl., 302.00 CID., 290.00hp
8 cyl., 350.00 CID., 295.00hp
8 cyl., 396.00 CID., 350.00hp
8 cyl., 396.00 CID., 375.00hp
$2,500 - $3,310
7,199
108.10 in.
8 cyl., 302.00 CID., 350.00hp
$3,527 - $3,527
235,147
106.00 in.
6 cyl., 230.00 CID., 140.00hp
6 cyl., 250.00 CID., 155.00hp
8 cyl., 327.00 CID., 210.00hp
8 cyl., 327.00 CID., 250.00hp
8 cyl., 327.00 CID., 275.00hp
8 cyl., 302.00 CID., 290.00hp
8 cyl., 350.00 CID., 295.00hp
8 cyl., 396.00 CID., 325.00hp
8 cyl., 327.00 CID., 350.00hp
8 cyl., 395.31 CID., 375.00hp
$2,600 - $3,797
243,085
108.00 in.
6 cyl., 230.00 CID., 140.00hp
6 cyl., 250.00 CID., 155.00hp
8 cyl., 307.00 CID., 200.00hp
8 cyl., 327.00 CID., 210.00hp
8 cyl., 350.00 CID., 255.00hp
8 cyl., 302.00 CID., 290.00hp
8 cyl., 350.00 CID., 300.00hp
8 cyl., 396.00 CID., 325.00hp
8 cyl., 396.00 CID., 350.00hp
8 cyl., 396.00 CID., 375.00hp
8 cyl., 427.00 CID., 430.00hp
$2,635 - $2,850
108.10 in.
8 cyl., 454.00 CID., 641.00hp
108.00 in.
8 cyl., 481.00 CID.
$2,850 - $2,850

Related Automotive News

IT'S OFFICIAL: CHEVROLET CAMARO TURNS 50!

IT'S OFFICIAL: CHEVROLET CAMARO TURNS 50!

Historic birthday highlights a legacy of achievement for Camaro to build upon for years to come DETROIT — Fifty years ago today, on Sept. 29, 1966, an American icon was born when the very first 1967 Camaro was sold. To commemorate this...
POWER PLAY: CAMARO ENGINES THROUGH THE YEARS

POWER PLAY: CAMARO ENGINES THROUGH THE YEARS

Five generations represent evolution of American performance DETROIT – Chevrolet Camaro has tracked the rise, fall and resurgence of American performance for nearly 50 years, making it a bellwether of horsepower. Since its 1967 introdu...
Radnor Hunt Concours 2017

Radnor Hunt Concours 2017

The Philadelphia Vintage Grand Prix was failing. The parks department and city put up enough bureaucratic roadblocks to make survival difficult. An event organizer and Radnor Hunt member Mike Tillson redirected his energies. He recalls approaching...

American Honda Supports RRDC Evening with George Follmer in Long Beach

HILLIARD, Ohio (March 29, 2016) - American Honda Motor Co., Inc., will support the RRDC Evening with George Follmer presented by Firestone by hosting the cocktail reception on April 14 for the seventh consecutive year at the Road Racing Drivers...

George Follmer to be honored by RRDC in Long Beach

HILLIARD, Ohio (March 2, 2016) - George Follmer, the only driver to have won both the Trans-Am and Can-Am championships in one year (1972), will be honored by the Road Racing Drivers Club at the RRDC Evening with George Follmer presented by Firestone...
Rare and Highly Sought After AMC Javelin at Russo and Steele Newport Beach!

Rare and Highly Sought After AMC Javelin at Russo and Steele Newport Beach!

Scottsdale, Arizona (April 2nd, 2015) – For Enthusiasts – By Enthusiasts.™ Much more than a tagline, its our lifestyle and its one that infuses all aspects of our auction events. Fresh off a thrilling, action packed and highly memorable Scottsdale...

RRDC VOTES IN 37 NEW MEMBERS FOR 2013

HILLIARD, Ohio (Nov. 7, 2013) - Thirty-seven race-car drivers and motorsports professionals have been voted into the Road Racing Drivers Club in 2013. The group includes 13 Regular Members from the open-wheel and sports-car racing ranks, 20 Associate...