|
|
|
|
|
| ||
The Triumph TR7 was produced from 1975 through 1981. In comparison to the Triumph TR6, the vehicle it replaced, it grew in length and width. The design was courtesy of Harris Mann who created what has been termed 'wedge shape.' It had been given the codename 'Bullet' while it was being designed, a name that was rather fitting due to its shape and characteristics.
The 1998cc four-cylinder engine gently placed in the front and provided 105 horsepower to the rear wheels. The United States version was slightly detuned to comply with emission and government regulations, resulting in 92 horsepower. The four-speed manual gearbox was standard with a five-speed unit offered as optional equipment. In 1976 a three-speed automatic transmission was made available. The independent suspension was comprised of coil springs, damper struts, anti-roll bar, and lower single link at the front. In the rear was a four-link system with coil springs and anti-roll bars. Stopping power was provided by the front disc brakes and rear drums.
Production continued until 1981 with 112,368 examples created. The TR7 was replaced by the TR8. There were 2,722 examples of the TR7 created the same time the TR8 had been in production.
The two-seater TR7 had continued the TR series of small and economical sports cars.
The 1998cc four-cylinder engine gently placed in the front and provided 105 horsepower to the rear wheels. The United States version was slightly detuned to comply with emission and government regulations, resulting in 92 horsepower. The four-speed manual gearbox was standard with a five-speed unit offered as optional equipment. In 1976 a three-speed automatic transmission was made available. The independent suspension was comprised of coil springs, damper struts, anti-roll bar, and lower single link at the front. In the rear was a four-link system with coil springs and anti-roll bars. Stopping power was provided by the front disc brakes and rear drums.
Production continued until 1981 with 112,368 examples created. The TR7 was replaced by the TR8. There were 2,722 examples of the TR7 created the same time the TR8 had been in production.
The two-seater TR7 had continued the TR series of small and economical sports cars.
| Photos grouped by event | |
|
2006 Pittsburgh Vintage Grand Prix Car Show |
 2005 PVGP Car Show |
1979 Triumph TR7 |
|
| Year | 1979 |
| Make | Triumph |
| Model | TR7 |
| Engine Location | Front |
| Drive Type | Rear Wheel |
| Production Years for Series | 1975 - 1981 |
| Weight | 2469 lbs | 1119.9 kg |
| Performance | |
| 0-60 mph | 11.5 seconds. |
| 1/4 Mile | 18.5 seconds. |
| Top Speed | 109 mph | 175.4 km/h Similar top speeds |
| Engine | |
| Engine Configuration | I |
| Cylinders | 4 |
| Aspiration/Induction | Normal |
| Displacement | 121.00 CU IN. | 1983.2 cc. | 2 L. |
| Horsepower | 88.00 BHP (64.8 KW) @ 5500.00 RPM |
| Torque | 101.00 Ft-Lbs (137 NM) @ 3250.00 RPM |
| HP to Weight Ratio | 28.1 LB / HP (Vehicles with similar ratio) |
| HP / Liter | 44.0 BHP / Liter |
| Vehicles with similar horsepower and weight | |
| Transmission Information | |
| Gears | 4 |
| Transmission | Manual |
| Similar Automakers |
| Add Review |
| View Reviews (15) |
| Other models by Triumph |
| View Specifications |
 |
| Articles and Event Coverage |
| 2006 Pittsburgh Vintage Grand Prix Car Show |
| 2005 PVGP Car Show |
| Additional Resources and Links |
| Pittsburgh Vintage Grand Prix Car Show Official Website |
| Topics |
|
should have been better
Replies: 4 Monday, August 09, 2004 |
|
General Comments
Replies: 11 Monday, January 01, 2001 |
| 1979 Triumph models |
| Spitfire 1500 |
| Other Model Years |
| 1980 TR7 |
| 1978 TR7 |
| 1976 TR7 |
| 1975 TR7 |
| Vehicle Spotlight | ||
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
Conceptcarz.com
| Site Map
| Contact
| Terms Of Use | Links | RSS
| Top
Automobile information, history, and statistics from concept to production. | © 1998-2008 Conceptcarz.com
Automobile information, history, and statistics from concept to production. | © 1998-2008 Conceptcarz.com