 1971 TR6 | 1973 TR6  |
 |  |  |  |  |
 |  |  |  |  |
 |  |  |  |  |
 |
1972 Triumph TR6 news, pictures, and information | ||
| Tweet | ||
The Triumph TR6 was introduced in 1969 as a replacement for the TR5/TR250. The TR6 featured similar running gear components and chassis as its predecessor but incorporated new external styling. The updated styling, courtesy of Karmann of Germany, allowed for more cargo capacity in the rear of the vehicle when compared with previous models. The doors and the center section remained unchanged from the TR4 and TR5 models. The interior comfort and drivability of the TR6 made it a highly successful British sports car. It was similar to the TR4 and TR5 with quality trim and a walnut dash.
The TR6 was fitted with a 2498 cc, six-cylinder, inline engine. The European fuel-injected version of the engine was capable of producing around 150 horsepower, while the US carbureted variant produced 104 horsepower. In 1972, the engine was de-tuned to 125 horsepower for the purpose of creating a smoother ride for city driving.
The TR6 used a synchromesh, four-speed gearbox and was fitted with overdrive that worked on third and fourth gear.
Throughout its lifespan, many alterations were performed on the car including interior and exterior styling and mechanical changes. In 1973, for example, the European engine was de-tuned to produce 125 horsepower; the purpose was to make the ride smoother through the use of camshaft alterations. During that same year, an air dam was placed below the bumper.
A detachable hardtop was optional equipment on the TR6. This allowed for driving in all weather conditions. An overdrive transmission was also available as options equipment.
In mid-1976, production of the TR6 ceased. During its production run, over 94,500 examples were produced of which, more than 86,200 units made their way to the US.
By Daniel Vaughan | Jun 2005
The TR6 was fitted with a 2498 cc, six-cylinder, inline engine. The European fuel-injected version of the engine was capable of producing around 150 horsepower, while the US carbureted variant produced 104 horsepower. In 1972, the engine was de-tuned to 125 horsepower for the purpose of creating a smoother ride for city driving.
The TR6 used a synchromesh, four-speed gearbox and was fitted with overdrive that worked on third and fourth gear.
Throughout its lifespan, many alterations were performed on the car including interior and exterior styling and mechanical changes. In 1973, for example, the European engine was de-tuned to produce 125 horsepower; the purpose was to make the ride smoother through the use of camshaft alterations. During that same year, an air dam was placed below the bumper.
A detachable hardtop was optional equipment on the TR6. This allowed for driving in all weather conditions. An overdrive transmission was also available as options equipment.
In mid-1976, production of the TR6 ceased. During its production run, over 94,500 examples were produced of which, more than 86,200 units made their way to the US.
By Daniel Vaughan | Jun 2005
 | Convertible Coupe Chassis Num: CC 79482 U | |
The TR6 was the final iteration of a long line of open two-seater cars that were sold at a very reasonable price. The TR6 has a redesigned Kamm-type tail, flatter hood, additional front overhang, and a center badge.
This example has been restored to its original specification. Most of its history has been lost to time, but it is believed to have spent its very early life in Canada. It has an owner repaint, newer convertible top and tonneau cover, and period correct tires. It was estimated to sell for $20,000 - $25,000. At auction, it failed to find an interested buyer willing to satisfy the vehicles reserve.
By Daniel Vaughan | Oct 2007
The Triumph TR6 was produced from 1969 through 1976 with about 94,619 examples produced with most destined for the United States. This became the Triumph's best-selling vehicle in history. Production continued into the middle of 1976, even after Triumph had introduced the TR6's replacement, the TR7.
The TR250 and its European counterpart, the TR5 PI, had been the interim models while Triumph worked hard on designing, building, and introducing its next open proper sports car. Sections of the TR6's body was similar to the prior series, with most of the visual changes appearing at the front and rear of the vehicle. It had a flatter hood, wider blackout grille, and front overhangs. The headlamps were moved out of the fenders. In the back, there was a Kamm-type tail.
Whereas the optional hardtop had been offered in two sections in the past, it was now a one-piece unit.
Powering the TR6 was a 2498 cc straight-six cylinder engine that produced just over 105 horsepower. In similar fashion to the TR250 and TR5 PI, the TR6 was carburetor for the American market and fuel injected for the European customers. Unfortunately for the US, the carburetor version offered less horsepower than its European sibling. The steering was by a rack-and-pinion unit. The gearbox was a four-speed manual with optional overdrive.
The interior was rather luxurious with its bucket seats and wooden dashboard. It was a true and refined sports car that continued on the proud and prosperous tradition of the TR series.
In mid-1971, the TR6 received slightly different gear ratios. In 1973, it was given a front spoiler and black bumper guards were added in 1974 to comply with US safety standards.
By Daniel Vaughan | Jul 2011
The TR250 and its European counterpart, the TR5 PI, had been the interim models while Triumph worked hard on designing, building, and introducing its next open proper sports car. Sections of the TR6's body was similar to the prior series, with most of the visual changes appearing at the front and rear of the vehicle. It had a flatter hood, wider blackout grille, and front overhangs. The headlamps were moved out of the fenders. In the back, there was a Kamm-type tail.
Whereas the optional hardtop had been offered in two sections in the past, it was now a one-piece unit.
Powering the TR6 was a 2498 cc straight-six cylinder engine that produced just over 105 horsepower. In similar fashion to the TR250 and TR5 PI, the TR6 was carburetor for the American market and fuel injected for the European customers. Unfortunately for the US, the carburetor version offered less horsepower than its European sibling. The steering was by a rack-and-pinion unit. The gearbox was a four-speed manual with optional overdrive.
The interior was rather luxurious with its bucket seats and wooden dashboard. It was a true and refined sports car that continued on the proud and prosperous tradition of the TR series.
In mid-1971, the TR6 received slightly different gear ratios. In 1973, it was given a front spoiler and black bumper guards were added in 1974 to comply with US safety standards.
By Daniel Vaughan | Jul 2011
The Triumph TR6 was basically an updated version of the TR5, which itself was basically a TR4A with a beefy pushrod six-cylinder engine in place of a four. The TR5 had a new fuel-injection (PI for Petrol Injection) system which did not fully comply with U.S. emission standards. So in place of the TR5 PI version with its 150 horsepower, the US received a twin-carburetor TR250 model which produced 104 horsepower.
The 2.5-liter twin-carb engine would be used for the TR6 and mated to a four-speed gearbox. The exterior received mild updates courtesy of Karmann of Germany. The rear featured a chopped-off Kamm tail that had adequate space for luggage. The front was longer and the grille was wider. The removable, optional hardtop was updated with a more angular design.
The TR6 remained in production for seven years with few changes along the way. Perhaps the biggest improvement was in 1973, an updated camshaft. This gave the vehicle better low-speed tractability and improved its idle. That same year, an optional Laycock electric overdrive also became available.
During the early 1970s, the US became more safety conscious and strict rules were made for vehicles. To comply, the TR7 gained large, black bumper guards for 1973.
Production of the TR6 continued through mid-1976 when the newly introduced TR7 took over the legendary TR name. It would, however, not generate the enthusiasm or sales as its TR6 sibling.
By Daniel Vaughan | Jul 2008
For more information and related vehicles, click hereThe 2.5-liter twin-carb engine would be used for the TR6 and mated to a four-speed gearbox. The exterior received mild updates courtesy of Karmann of Germany. The rear featured a chopped-off Kamm tail that had adequate space for luggage. The front was longer and the grille was wider. The removable, optional hardtop was updated with a more angular design.
The TR6 remained in production for seven years with few changes along the way. Perhaps the biggest improvement was in 1973, an updated camshaft. This gave the vehicle better low-speed tractability and improved its idle. That same year, an optional Laycock electric overdrive also became available.
During the early 1970s, the US became more safety conscious and strict rules were made for vehicles. To comply, the TR7 gained large, black bumper guards for 1973.
Production of the TR6 continued through mid-1976 when the newly introduced TR7 took over the legendary TR name. It would, however, not generate the enthusiasm or sales as its TR6 sibling.
By Daniel Vaughan | Jul 2008
| Auctions America Readies for Highly Anticipated Spring Carlisle Collector Car Weekend | |
 | • Auctions America returns to Carlisle, Pennsylvania for its annual Spring Carlisle sale, April 25-26 • Two-day sale lifts the gavel on a diverse roster of approximately 300 quality collector cars • Notable highlights include a rare 1959 Chevrolet Corvette 'Big-Brake' Fuel-Injected Roadster, a 1970 Chevrolet Chevelle SS LS5 Convertible and a 1999 Bentley Azure Convertible • Sale held during Carlisle Events' highly anticipated Spring Carlisle Collector Car Swap Meet & Corral weekend, April 24...[Read more...] |
| VICARI AUCTION COMPANY OFFERS RARE '62 & '63 Z06 CORVETTES AT 2013 CRUISIN' NOCONA | |
 | In a recent rare find, two classic Chevrolet Corvettes (one '62 and one '63) - stored for decades-are being made available by the Vicari Auction Company. Both vehicles will cross the block during 2013 Cruisin' Nocona, a north Texas collector car auction and classic car poker cruise set for April 19th and 20th in historic Nocona, Texas. The Corvettes are virtually all-original, and have been stored in Texas by a classic-vehicle aficionado and collector since the 1980s. 'These...[Read more...] |
| Barrett-Jackson Flavors Its January Scottsdale Auction With NASCAR Treats | |
 | • RACING HERITAGE, HIGH PERFORMANCE ARE RECIPES FOR CAR-COLLECTING FEAST • SPEED™ SET FOR 39 HOURS of LIVE COVERAGE STARTING JAN. 15 The great Henry Ford once said, 'Auto racing began five minutes after the second car was built.' And for more than 60 years, there are few entities that better represent auto racing in America than NASCAR. From the hallowed grounds of Daytona International Speedway, to Sonoma, California's intricate and picturesque road course, the sp...[Read more...] |
| TOPLINE COLLECTORS PLACE SPOTLIGHT on SPEED'S BARRETT-JACKSON BROADCAST FROM SCOTTSDALE | |
 | • TOPLINE COLLECTORS PLACE SPOTLIGHT on SPEED'S BARRETT-JACKSON BROADCAST FROM SCOTTSDALE • 'LOST' SHELBY DUAL PROTOTYPE, HAGERTY GIVEAWAY & SALON COLLECTION HIGHLIGHT 39 HOURS OF LIVE COVERAGE The 42nd annual Barrett-Jackson Scottsdale (Ariz.) Collector Car Event, the first of four set for live coverage in 2013, kicks off the auction season in grand style as some of the world's most sought-after machines cross the block starting Tuesday, Jan. 15 at 7 p.m. ET/4 p.m. PT. SP...[Read more...] |
 1972
Triumph
models |
| Triumph Spitfire Mk IV |
| Similar Automakers | |
| Allard | Austin-Healey |
| Bristol | MG |
| Morgan | |
| Similarly Sized Vehicles from 1972 |
| Datsun 1200 |
| Triumph: 1971-1980 |
| Similar Automakers |
| Other models by Triumph |
| Vehicle Recall Information |
| 2000 | Dolomite | Gloria Southern Cross | GT6 | Herald | Spitfire | Stag | TR |
| 1971 TR6 | 1973 TR6 |
