Hispano-Suiza was a cosmopolitan marque, with Swiss and Spanish roots and a parallel manufacturing base in France. The basis for the first Hispano-Suiza of 1904 was the Barcelona-built Castro designed by Swiss engineer Marc Birkigt. A series of T-head fours followed, attracting the attention of Spain's King Alfonso XIII. Just prior to the outbreak of World War I, the company incorporated overhead-cam engines, but with the outbreak of war, Hispano-Suiza turned to aero engines, built under the direction of Birkigt and engineered by Louis Massuger, also of Swiss origin.
Cabiolet by Brandone
Chassis #: 16035
Engine #: 333054
View info and history
Auction entries : 3When peacetime resumed, Spanish automobile developments placed 'second fiddle' to those of a new factory in France, which had opened in 1911. Among the early achievements was the H6 of 1919, which remained in production for a decade. Its straight-six engine was inspired by Birkigt's aircraft engines and was essentially half of the aviation V12. The all-aluminum unit displaced 6,597cc, had a seven-bearing crankshaft, and new overhead camshafts. The brakes were also very special, being light-alloy drums at all four wheels with power-assist, an 'industry first.' Driven by a shaft from the transmission, the car's decelerating momentum drove the brake servo, providing additional power. Rolls-Royce later licensed this technology for use on their vehicles. A slightly more powerful H6B version arrived in 1922, followed by the H6C in 1924, employing an 8.0-liter (488 cubic inch) engine.
The Hispano-Suiza K6 went into production in 1933 following the short-lived 'Junior' HS26 built in 1931 and 1932. Beneath the bonnet was a six-cylinder engine derived from the flagship 12-cylinder J12 (built from 1931 to 1938). Designed by Rodolphe Herrmann, it had pushrod overhead valves, dual downdraft carburetors, a 5,184cc displacement, and delivered 125 horsepower. This new engine had a 110-millimeter stroke with improved breathing, allowing for more horsepower than its spiritual predecessor (the H6) from fewer cubic inches of displacement. Power was sent to the rear wheels via a three-speed manual gearbox, and four-wheel servo-assisted mechanical drum brakes provided the stopping power. The braking system utilized a driveshaft-mounted servo-mechanism to complement the mechanical pressure applied to the brake pedal. The chassis was similar to the J12 but lighter and with a wheelbase size of 3,710mm (the same wheelbase as the J12 Court). It was suspended by a solid front and live rear axle with semi-elliptic leaf springs. Many lightweight alloys and high-strength steels were used throughout its construction, providing a rigid and lightweight structure. (The brakes, gearbox, steering and suspension were identical to the ones used on the J12).
Drophead Coupe
View info and historyThe Hispano-Suiza K6 was a proper grand tourer that was capable of cruising comfortably at 80 mph, achieving that speed with effortless smoothness. They were luxurious, stylish, superbly engineered, exclusive, and popular with Indian Maharajahs, Hollywood film stars, industrial tycoons, and European Royalty. It was a long-distance touring chassis for buyers who did not want the complexity or size of a J12 but enjoyed the same quality and similar prestige.
by Daniel Vaughan | Nov 2023
Cabiolet by Brandone
Chassis #: 16035
Engine #: 333054
View info and history
Auction entries : 3
The Hispano-Suiza K6
The Hispano-Suiza K6 went into production in 1933 following the short-lived 'Junior' HS26 built in 1931 and 1932. Beneath the bonnet was a six-cylinder engine derived from the flagship 12-cylinder J12 (built from 1931 to 1938). Designed by Rodolphe Herrmann, it had pushrod overhead valves, dual downdraft carburetors, a 5,184cc displacement, and delivered 125 horsepower. This new engine had a 110-millimeter stroke with improved breathing, allowing for more horsepower than its spiritual predecessor (the H6) from fewer cubic inches of displacement. Power was sent to the rear wheels via a three-speed manual gearbox, and four-wheel servo-assisted mechanical drum brakes provided the stopping power. The braking system utilized a driveshaft-mounted servo-mechanism to complement the mechanical pressure applied to the brake pedal. The chassis was similar to the J12 but lighter and with a wheelbase size of 3,710mm (the same wheelbase as the J12 Court). It was suspended by a solid front and live rear axle with semi-elliptic leaf springs. Many lightweight alloys and high-strength steels were used throughout its construction, providing a rigid and lightweight structure. (The brakes, gearbox, steering and suspension were identical to the ones used on the J12).
Drophead Coupe
View info and history
by Daniel Vaughan | Nov 2023
Related Reading : Hispano Suiza K6 History
Hispano-Suiza was founded in 1909 by Swiss engineer Marc Birkigt and Spanish investors. During World War I, the company designed and produced aircraft engines. After the war, the company returned to automobile manufacturing and in 1919 it introduced the six-cylinder Hispano-Suiza H6. Its overhead camshaft engine was based on features of the V8 aluminum engines used in aircraft during WWI. Demand for....
Continue Reading >>
Continue Reading >>
1935 Hispano Suiza K6 Vehicle Profiles
Recent Vehicle Additions
Performance and Specification Comparison
Price Comparison
K6 Specification Comparison by Year
Year
Production
Wheelbase
Engine
Prices
146.50 in.
Related Automotive News
JAGUAR LAND ROVER REPORTS U.S. SALES FOR FEBRUARY 2013
Jaguar Land Rover North America sales increase 18 percent for February 2013
Land Rover U.S. sales increase 20 percent for February 2013
Best overall Land Rover February retail sales month ever
Jaguar U.S. sales increase 12 percent for February...
2014 RANGE ROVER NOW AVAILABLE FOR ORDER WITH A CHOICE OF SUPERCHARGED V6 & V8 ENGINES
Following the sales success of the all-new 2013 Range Rover, the 2014 Range Rover is now available for order, with deliveries beginning this summer
A new 340hp 3-liter supercharged V6 will offer improved efficiency with reduced emissions and unco...
Edsel Ford's Speedster Stars at 'The Amelia'
Edsel Fords continental car, a custom boattail speedster, will take its rightful place in the Sports Car Class of the 18th annual Amelia Island Concours dElegance. In the shape of Edsels seminal speedster is the genesis of Fords legendary design...
JAGUAR F-TYPE: DYNAMIC DEVELOPMENT MILESTONE
Martin Brundle, Christian Danner and Justin Bell drive F-TYPE prototypes on
track and road
Jaguar F-TYPE to arrive in U.S. market in summer 2013 starting at %2469,000*
(MAHWAH, N.J.) - December 14, 2012 - The Jaguar F-TYPE has undergone it...
Jaguar Land Rover Debuts Three All-New British Vehicles At 2012 Los Angeles International Automobile Show
Jaguar Land Rover introducing three new vehicles with special focus on the U.S. Market
High-performance 2014 Jaguar XFR-S makes its world debut
All-new two-seat sports car, the Jaguar F-TYPE, makes its U.S. Auto Show Debut
The worlds first all...