|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| View more photos Chassis Num: 0490AM |
Gioacchino Colombo started out being the primary builder of Ferrari's engines in the late in 1940's and a major contributor to the success of Ferrari. Aurelio Lambredi became his assistant in 1947. Lambredi soon became convinced that a large engine that was naturally aspirated would have better fuel economy and provide more power. Colombo was of the belief that smaller engine compiled with a supercharger would produce the better results. Ferrari tested Lambredi's idea and proved it to be successful. Lambredi was promoted to chief design engineer and Colombo returned to Alfa Romeo. The Lambredi engines were used in the ladder part of the 1950's.
Power was provided by a 4.5-liter Lampredi designed V-12 engine with either three twin choke Weber 40 DCZ or DCF downdraughts, resulting in 300 horsepower. On all four corners were drum brakes, Borrani wire wheels accented the exterior of the vehicle, and a leaf spring suspension was used in the front and the rear. With the four-speed manual gearbox, the car could achieve a top speed of 150 mph and could race from zero to sixty in less than seven seconds.
Most Ferrari's were custom built cars. They were not mass-produced. Ferrari provided the engine and chassis while Italian coach builders provided the body. This meant the specifications varied. Engines also varied in horsepower rating, torque, and displacement.
In regards to the 375, Pinin Farina was tasked with building the bodywork for many of the models. The Pinin Farina design shared a similarity with the 250 Europa's. The dimensions of several automobiles were similar but their interiors, wings, bumpers and detailing were all unique.
The 375 MM was given its name after the famous 1000 mile race, the Mille Miglia. This limited production series was constructed in 1953 and 1954. The car was outfitted with a 4522 cc powerplant, a small increase in performance over the 4494 cc road-going version. The four-speed manual gearbox was fully synchronized and mounted to the engine. The front suspension was independent by parallel unequal length A-arms with a transverse leaf spring. The rear was sold with semi-elliptic springs and parallel trailing arms. This combination made the 375 MM perfect for high speed circuits and the open road. In total only 26 375 MM's had bodywork provided by Pinin Farina in either spyder or berlinetta configuration. One example received bodywork courteous of Ghia.
In 1954, a 375 Plus was entered in the grueling 24 Hours of LeMans. Powered by a 4.9 liter engine, it captured the overall victory.
Production of the 375 continued until 1955. Produced in limited numbers, their exclusivity in modern times is guaranteed. These wonderfully designed unique creations powered by the coveted Lampredi engines are a true time-tested testament of the work inspired by Enzo Ferrari and fostered by Italian ingenuity.
0490AM
Ferrari 375MM Berlinetta with chassis number 0490AM was bodied by Pinin Farina and used by Bernabelli as a road car. It was shown at the 1955 Turin Motor Show where its beauty was admired by many. It was painted ivory and black and sold to De Bickero.
![]() | ![]() | View more photos Designer: Pininfarina Chassis Num: 0472AM |
| Photos grouped by event | |||
![]() Pebble Beach Concours d'Elegance |
![]() 2006 Palm Beach Cavallino Classic XV Concours |
2005 Palm Beach International Concours d'Elegance |
![]() 2005 Palm Beach Cavallino Classic |
| View more photographs |
| Similar Automakers |
| Add Review |
| Other models by Ferrari |
| Related Articles and Event Coverage |
| Pebble Beach Concours d'Elegance |
| 2006 Palm Beach Cavallino Classic XV Concours |
| 2005 Palm Beach International Concours d'Elegance |
| 2005 Palm Beach Cavallino Classic |
| 1955 Ferrari models |
| Ferrari 121 LM |
| Ferrari 250 Europa GT |
| Ferrari 250 Europa GT TdF |
| Ferrari 375 America Pinin Farina Coupe Speciale |
| Ferrari 500 Mondial Spyder |
| Ferrari 750 Monza |
| Vehicle Spotlight | ||
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |








































