1910 Stanley Model 71 news, pictures, specifications, and information
Toy Tonneau
 
This car left the factory on September 16, 1910, and was first restored in 1946. It was driven in the 1952 Glidden Tour revival, to carry balloonist Augusta Post. The tour terminated in Washington, DC, to enhance the 50th Anniversary celebration of the AAA.
It has a mid-size 20-horsepower boiler and engine on a wheelbase of 115' with 36 x 4 straight-side tires. It was considered a very sporty touring car easily capable of sustained speeds of nearly 50 mph. Originally intended to burn gasoline, the burner was converted to kerosene after 1913, which was common practice on most Stanley's of this period.
The car was professionally restored again in 1998 and has been used in several Steam Car Tours, including the two Mount Washington events sponsored by the Stanley Museum in 1999 and 2004.
The Stanely Motor Carriage Company produced steam powered automobiles during the early 1900's. The automobile had just been created and many individuals and companies were experimenting with a wide variety of fuel sources, such as gasoline, electric, and steam. These three sources were the primary sources with each having benefits and limitations. The electric vehicles were limited on their range but they were clean, quiet and easy to start. The steam powered vehicles were also clean and quiet but they required a few minutes before starting to allow steam to form. The gasoline engine was noisy, dirty, and hard to start but showed the most potential. The advent of the electric starter around 1914 meant the demise of the other fuel sources.

Twins Francis Edgar and Freelan O. Stanley were born in 1849. Francis passed away in 1918 and Freelan survived until 1940. Their first glimpse of business ingenuity was shown at an early age when they opened a photographic dry plate business which they eventually sold to Eastman Kodak. They became interested in the horseless carriage and in 1897 had created their first automobile. The eventually sold the rights of their design to Locomobile.

The brothers produced steam powered vehicles from 1902 through 1917, known as the Stanley Steamers. Throughout the years the configuration of the vehicles, the complexity of the engines, and the mechanical components were all greatly improved.

The cars were simple yet complex, and rather ingenious. The frame was constructed of tubular steel and suspended by full-elliptic springs. Wooden bodies were built atop of the frames with a boiler mounted beneath the seat. A petroleum burner, later replaced by kerosene, was placed underneath the vertical fire-tube boiler and generated the steam. Piano-wire was used to reinforce the enclosure. By using piano wire, a low overall weight was maintained while increasing the structural rigidity of the boiler. The vertical fire-tubes were made of copper and later replaced with welded steel. A thick chain was connected from the engine crankshaft to a rear-mounted differential.

The boilers were made safe by incorporating certain safety valves that could be used to release pressure. Even with these safety valves, there was still concern of the boiler shell bursting. The boiler was made up of many joints and in the cases of excessive pressure, these joints would fail and release that pressure, extinguishing the burner, and subside the potential catastrophe.

The name 'coffin bonnet' was coined when the broiler was moved to the front of the vehicle, creating an appearance similar to other cars of the era. By moving it to the front of the vehicle, the noise generated by the boiling steam was slightly subsided for the passengers.

By 1917 the Stanley brothers sold their company to Prescott Warren who continued to build the steam powered car until 1927. The demise of the company was slow but much anticipated. The automobile was rapidly evolving while the Steamer was stagnate. Gasoline was inexpensive and reliable and more importantly, cheap. Steam powered cars sold for around $4000 while the Ford and Chevrolet, to name a few, were producing cars under $1000. Gasoline engines were increasing in size, capacity, and output while the steam cars hovered around 20 horsepower.

One of the most famous Steam powered cars is the Stanley Rocket which captured a land speed record for steam at 127.7 mph at the Daytona Beach Road Course. Driven by Fred Marriott, he easily secured the Dewar International Trophy awarded to the vehicle with the fastest measured mile time, which he accomplished in just 28.5 seconds.

The Stanley Rocket was designed to have limited drag. It was similar in shape to a canoe. It was long and narrow, at 16 feet long and 3 feet wide at its widest point. Most of the components of the car were housed within the body which increased aerodynamics. The 3.1 liter engine was a twin-piston double acting type that was capable of producing a reported 275 or 1000 psi at 700 degrees F. The entire vehicle weighed less than 1680 pounds.

By Daniel Vaughan | Mar 2006
Recent Vehicle Additions

1952 Ford Golden Rod

1973 Battery Box Experimental Electric

1930 Aston Martin 1.5-Liter International

1932 Hudson Series T Eight

1977 Maserati Kyalami

1971 Bizzarrini 128P Prototype
TIPS FROM FORD MOTOR COMPANY AND THE EMILY POST INSTITUTE FOR AN ENJOYABLE (AND POLITE) DRIVE THIS HOLIDAY SEASON
New York, Nov. 23, 2015 – Holiday driving can cause more than road rage – it can wreak havoc on relationships. Whether stuck in Thanksgiving traffic or riding for hours with the in-laws, the 'most wonderful time of the year' has serious potential to turn family fun into family feud. Last Thanksgiving, AAA predicted 46.3 million Americans traveled more than 50 miles from home – the greatest distance in nearly a decade. Now, with drivers enjoying the lowest gas prices in five years, AAA...[Read more...]
1956 Sebring 12 Hours: Musso Impresses on American Soil
 Having more than proven himself within the 2.0-liter category with the factory Maserati team, Luigi Musso makes the short trip west from Modena to Maranello to drive for Ferrari. This would be a big step up in performance, for car and driver. Here Musso's real talent would need to be realized. Otherwise, the Italian would find himself an estranged patriot without a home. But, on American soil, the young Italian would find his place. The Roman Musso had had an impressive run with Maserati. Af...[Read more...]
Brass and Classic Era Automobiles Set to Shine at RM's Annual Hershey Sale
• RM Auctions returns to Hershey, Pennsylvania, October 10–11, for its well-established Hershey sale • Two-day auction presents more than 100 automobiles, with a focus on exceptional Brass and Classic Era motor cars • Coinciding with the popular AACA Eastern Regional Fall Meet, the sale is a highlight of the meet weekend • Frequently updated list of entries available online at rmauctions.com BLENHEIM, Ontario (July 30, 2013) – RM Auctions, the world's largest collector car auction ...[Read more...]
Andy Warhol'S 1979 Bmw M1 Art Car To Be Center Piece At Saratoga Automobile Museum
• BMW History and Heritage on four wheels and two on display from May – November, 2013
Woodcliff Lake, NJ – May 17, 2013… Andy Warhol's 1979 BMW M1 Art Car will be the center piece of the exhibition 'BMW – The Ultimate Driving Machine', which opens this weekend at the Saratoga Automobile Museum. The exhibition will also feature the BMW 3.0 CSL which won the Daytona 24 Hour race in 1976. The exhibition, which features a retrospective of BMW cars and motorcycles, will run until ...[Read more...]
FULL STEAM AHEAD FOR HISTORICS
• Stanley Steamer takes centre stage for spring sale
Brooklands will provide the backdrop for the ultimate MPV – built long before the category was even invented – when a 1917 20hp Stanley Mountain Wagon crosses the 'block' on Saturday March 9th for Historics' spring sale. Having sold their dry plate photographic business to Eastman Kodak, twin brothers Francis E. Stanley and Freelan O. Stanley decided to set up the Stanley Motor Carriage Company in order to manufacture steam powe...[Read more...]

EX
Steamer Model F

© 1998-2017. All rights reserved. The material may not be published, broadcast, rewritten, or redistributed.