 2010 California | 2010 California | 2012 California  |
 |  |  |  |  |
 |  |
Image credits: © Novitec.
2011 Novitec California RACE 606 news, pictures, and information | ||
| Tweet | ||
World Debut at the Geneva Motor Show 2011: The NOVITEC ROSSO RACE 606 Based on the Ferrari California 606-hp Compressor-V8 for 201.95 mph in a Racing Suit
606 hp from an eight-cylinder supercharged engine propel it to a top speed of 201.95 mph and its ultra-sporty racing suit wîth carbon-fiber components fits it like an aerodynamic second skin: The NOVITEC ROSSO RACE 606 based on the Ferrari California will celebrate its world debut at the Geneva Motor Show 2011.At the heart of the supercar lies the supercharged 4.3-liter V8-engine, which the NOVITEC ROSSO specialists developed specifically for this front-engine sports car. This engine is available for the special model RACE 606 and for any standard California model.
The compressor system consists of a mechanical supercharger driven by the crankshaft via a cogged V-belt. It produces a maximum boost pressure of 0.4 bar. The conversion also includes a water-to-air intercooler, a newly designed intake manifold and larger injectors.
For better exhaust-gas flow the high-performance engine is fitted wîth a flap-controlled NOVITEC ROSSO high-performance exhaust system wîth sport catalysts. The stainless-steel exhaust system features four black-coated tailpipes and offers various sound settings that are controlled by the Manettino button on the §teering wheel. The driver can choose between a more subdued and a markedly sporty exhaust note.The high-tech components are coordinated by newly calibrated engine electronics that ensure extraordinary power yield, everyday suitability beyond reproach and compliance wîth strict Euro IV emission standards. ( posted on conceptcarz.com)
 | Vital Stats |
| Engine : 6-cylinder Power: 340 hp Torque: 494 ft-lbs | |
7-speed Semi-Automatic | |
Powered by this engine the NOVITEC ROSSO RACE 606 delivers impressive performance: The sprint from 0 – 62 mph takes less than 3.8 seconds. Top speed increases to 201.95 mph. At this level of performance favorable aerodynamic properties are essential. The NOVITEC ROSSO designers went into the wind tunnel to develop body components that further reduce lift on front and rear axle and thus contribute to further optimized directional stability at high speed.
All parts of the aerodynamic-enhancement package are made from matte clear-coated carbon-fiber, making them especially light and yet highly resistant. The front and rear spoilers together wîth the rear diffuser create an optimal aerodynamic balance and are essential for the racing look of the sports car. Rocker panel blades, side air outlets in the front fenders, mirror covers and the rear molding add further thrilling highlights.
Also made entirely from carbon fibers is the hood centerpiece, the radiator grille, the outer skin of the folding hardtop and the taillight surrounds. The motorsports look is rounded out wîth a matte carbon-fiber coating of the three-piece NOVITEC ROSSO NF3 wheels. To further emphasize the wedge shape of the sports car the wheels were manufactured in a staggered combination of size 9Jx21 for the front and in size 11.5Jx22 for the rear axle. The matching PZero high-performance tires in sizes 255/30 ZR 21 and 315/25 ZR 22 are supplied by technology partner and Formula 1 supplier Pirelli.
Specifically calibrated to this tire/wheel combination are the NOVITEC ROSSO sport springs, which lower the ride height of the Ferrari by some 35 millimeters. They are combined wîth a feature designed to further improve any California's suitability for everyday use. The hydraulic front lift system is activated at the push of a button in the cockpit. It raises the front of the car by 40 millimeters and facilitates navigating speed bumps and parking garage ramps. At a second push of the button or automatically upon reaching a speed of 80 km/h the front reverts to its original position.
The interior of the NOVITEC ROSSO RACE 606 can also be customized extensively. The options include scuff plates made from the same material as the aerodynamic-enhancement components and longer shift paddles on the §teering wheel. Úpon customer request NOVITEC ROSSO creates especially exclusive or extremely lightweight interiors in any desired color. Request for more individualization can be fulfilled wîth carbon-fiber elements that match the exterior and a safe-grip §teering wheel covered wîth suede or Alcantara.Source - Novitec Rosso
| Rapid Prototyping Speeds Updates On 2014 Chevrolet Malibu | |
 | DETROIT – When Chevrolet set out to refresh the Malibu's interior and exterior for 2014, designers used one of the most cost-effective and time-saving methods in its high-tech tool box: rapid prototyping, also known as 3-D printing. The processes literally grow prototype parts out of powder or liquid resin at a fraction of the cost associated with building tools to make test parts. Selective laser sintering and stereo lithography – the official names of the processes – helped accelerat...[Read more...] |
| New Technologies and Sleek Design Make Commodore the Most Economical Yet | |
 | ◾Holden reduces Commodore Evoke overall mass by 43 kg ◾Commodore improves fuel economy for every model in the range ◾Introduction of aluminium components, including bonnet and boot lid ◾Electric power steering and improved aerodynamics aid fuel economy gains With clever use of lightweight technology and improved aerodynamics, the new VF Commodore delivers a big boost in fuel efficiency, reduced running costs and lower CO2 emissions. Holden was able to make the significant fuel economy i...[Read more...] |
| TESTING IN BARCELONA - OVER 500 KILOMETRES FOR ALONSO ON HIS DEBUT | |
 | Circuit: Catalunya Circuit, Montmelo – 4.655 km Driver: Fernando Alonso Car: Ferrari F138 Weather: air temperature 13/17°C, track temperature 13/28 °C. Cloudy in the morning, then sunny in the afternoon. First day of testing for Scuderia Ferrari and the ten other Formula 1 teams, running at the Catalunya circuit, on the outskirts of Barcelona, from now until Friday. Fernando Alonso made his seasonal track debut, driving the F138 for the first time. The entire day was dedicated almo...[Read more...] |
| AFTER MORE THAN TWO YEARS IN THE MAKING, 2013 NASCAR FORD FUSION READY TO MAKE ITS DAYTONA 500 DEBUT | |
 | •The car that helped bring 'stock car back to NASCAR' ready to take to Daytona track •More than two-year development process included work by Ford design center, computational fluid dynamics, wind tunnel work, body stamping and finally, on-track testing •2013 NASCAR Ford Fusion is part of the generation-six launch of NASCAR race cars •Fusion race teams will try and capture fourth Daytona 500 win in five years DEARBORN, Mich., Feb. 20, 2013 – This weekend, the 'stock car' official...[Read more...] |
| Auctions America By RM's 2012 Auburn Spring Auction | |
 | 'Variety' is the buzzword for this year's Auctions America by RM June 1-3 Auburn Spring auction, which will offer a huge range of collector vehicles and an enormous private collection of automotive memorabilia. More than 600 American muscle cars, Classics, foreign sports cars and hot rods will cross the block at the historic Auburn Auction Park, the company's national headquarters in Auburn, Indiana. 'Last year was our first spring event at the park,' said Auctions America by RM's President ...[Read more...] |
2011| Similar Automakers | |
| Aston Martin | Bentley |
| Bugatti | Devon |
| GTA | Koenigsegg |
| Lamborghini | Lotus |
| Maserati | Maybach |
| McLaren | Porsche |
| Rolls-Royce | Spyker |
| Tesla | |
| Similarly Sized Vehicles from 2011 |
| Acura TL |
| Alfa Romeo 8C Spider |
| Aston Martin DB9 |
| Aston Martin DB9 |
| Aston Martin Virage |
| Audi A7 |
| Audi Chrome R8 Spyder |
| Audi Q5 |
| Audi Q5 Hybrid |
| Audi R8 |
| Ferrari: 2011-2020 |
| Similar Automakers |
| Other models by Ferrari |
| Related Articles and Event Coverage |
| 2011 Geneva Salon International de l'Auto |
| 2010 California | 2010 California | 2012 California |
