Image credit: © conceptcarz.com (Reproduction Or reuse prohibited).
The Essex Motor Company was formed in 1917 and made its debut the following year as Hudson Motor Company's 'junior' companion marque. It operated from the old No. 5 Studebaker plant on Detroit's Franklin Avenue. Essex was named after an English town and was financed and managed by top Hudson staff. For example, Hudson president Roy D. Chapin and other leading Hudson staff served on the Essex board of directors. Essex president William S. McAneeny was Hudson's factory manager, and top Hudson executives Roscoe B. Jackson and A.E. Barit held administrative posts at Essex.
The original Essex vehicles were powered by a 55 horsepower 'four' mounted in a 108-inch wheelbase and given angular body designs. They were relatively inexpensive while offering good performance and reliability. The first Essex automobiles were produced in December of 1918 as 1919 models after they had been delayed due to World War I.
Essex vehicles are credited with beginning the trend away from open-bodied cars. They realized very early the interest in closed cars, offering America's lowest-priced version starting in 1922. The cars were very dependable and won several hill climbing challenges including the 1923 Pikes Peak run. In December of 1919, an AAA-supervised demonstration test was executed involving an Essex being driven to speeds exceeding 60 mph at the Cincinnati Speedway over 50 hours and 3,037.4 miles. Four Essex motorcars participated in a publicized transcontinental run in August of 1920, with a mail pouch transported by each car and each driver swore in as official letter carriers.
Essex sales were impressive, outselling Hudson two consecutive years in 1919 and 1920, and matching them for 1921. 92 cars were produced in 1918 as 1919 models. Over the years, sales continued to escalate and propelled the Hudson Motor Car Company into third place in overall sales for 1929.
For 1922, Essex and Hudson were merged into a single company. The Essex vehicles received a new wider body for the Touring car with front hinges and wider doors. Body styles included the Tourer, Sedan, Cabriolet, and a new two-door, five-passenger coach. Mechanical updates heightened reliability and durability. The four-cylinder engine received a new cylinder head, a more efficient fuel intake, repositioned spark plugs, and a Morse timing chain.
For 1922, Essex shipped 36,222 vehicles to their dealers.
The Essex vehicles received minor changes for 1923, followed by a controversial change in 1924, with its F-head 4-cylinder engine being replaced by a 6-cylinder of conventional L-head design. It originally had 130 cubic inches which were soon increased to 144.5 cubic inches, resulting in a boost in horsepower. The Essex Six was given a 3-bearing crankshaft, aluminum pistons, a cast enbloc intake manifold, and a Morse timing chain. The vehicles had a 110.5-inch wheelbase and a length of 156.5 inches.
Very few changes occurred for the 1925 Essex vehicles. During the year, the tire size changed from 31.525 to 30 x 4.95 and minor engine modifications were progressively made. Body styles included a Touring car and a 2-door coach, which received a new appearance in March. Changes included a thinner windshield, thinner door posts, a re-shaped windshield visor, and a curved windshield base.
Essex sales more than doubled from 1924, with 159,634 shipments to dealers. This was 45 percent over Hudson. Part of the success was attributed to price reductions and detailed refinements. A small number of Essex chassis were shipped overseas and given custom coachwork.
This particular example wears a Roadster body by Johnson and Smith of Christchurch, New Zealand. During the 1960s, the Essex was acquired by an American who had taken a vintage American car to New Zealand to participate in a classic rally there. Unfortunately, he was advised that his left-hand drive car was ineligible for the event. So, he purchased this right-hand drive 1925 Essex Roadster for the sole purpose of entering the rally. He used the Essex in the road rally and enjoyed the car so much that it was shipped to the United States, where it has remained ever since.
Eldon Hostetler acquired the car on September 18th of 1999 from an auction near Denver, Colorado. At the time, the car showed 26,047 miles on its odometer. Currently, the car has disc-type wheels, a rear-mounted spare, twin cowl lamps, a moto-meter, wind wings, and a toolbox affixed on the driver's side running board. The engine is a 144.6 cubic-inch L-head inline six-cylinder unit fitted with a single Stewart carburetor. There are a three-speed manual transmission and two-wheel (rear) mechanical brakes.By Daniel Vaughan | Jan 2019
The original Essex vehicles were powered by a 55 horsepower 'four' mounted in a 108-inch wheelbase and given angular body designs. They were relatively inexpensive while offering good performance and reliability. The first Essex automobiles were produced in December of 1918 as 1919 models after they had been delayed due to World War I.
Essex vehicles are credited with beginning the trend away from open-bodied cars. They realized very early the interest in closed cars, offering America's lowest-priced version starting in 1922. The cars were very dependable and won several hill climbing challenges including the 1923 Pikes Peak run. In December of 1919, an AAA-supervised demonstration test was executed involving an Essex being driven to speeds exceeding 60 mph at the Cincinnati Speedway over 50 hours and 3,037.4 miles. Four Essex motorcars participated in a publicized transcontinental run in August of 1920, with a mail pouch transported by each car and each driver swore in as official letter carriers.
Essex sales were impressive, outselling Hudson two consecutive years in 1919 and 1920, and matching them for 1921. 92 cars were produced in 1918 as 1919 models. Over the years, sales continued to escalate and propelled the Hudson Motor Car Company into third place in overall sales for 1929.
For 1922, Essex and Hudson were merged into a single company. The Essex vehicles received a new wider body for the Touring car with front hinges and wider doors. Body styles included the Tourer, Sedan, Cabriolet, and a new two-door, five-passenger coach. Mechanical updates heightened reliability and durability. The four-cylinder engine received a new cylinder head, a more efficient fuel intake, repositioned spark plugs, and a Morse timing chain.
For 1922, Essex shipped 36,222 vehicles to their dealers.
The Essex vehicles received minor changes for 1923, followed by a controversial change in 1924, with its F-head 4-cylinder engine being replaced by a 6-cylinder of conventional L-head design. It originally had 130 cubic inches which were soon increased to 144.5 cubic inches, resulting in a boost in horsepower. The Essex Six was given a 3-bearing crankshaft, aluminum pistons, a cast enbloc intake manifold, and a Morse timing chain. The vehicles had a 110.5-inch wheelbase and a length of 156.5 inches.
Very few changes occurred for the 1925 Essex vehicles. During the year, the tire size changed from 31.525 to 30 x 4.95 and minor engine modifications were progressively made. Body styles included a Touring car and a 2-door coach, which received a new appearance in March. Changes included a thinner windshield, thinner door posts, a re-shaped windshield visor, and a curved windshield base.
Essex sales more than doubled from 1924, with 159,634 shipments to dealers. This was 45 percent over Hudson. Part of the success was attributed to price reductions and detailed refinements. A small number of Essex chassis were shipped overseas and given custom coachwork.
This particular example wears a Roadster body by Johnson and Smith of Christchurch, New Zealand. During the 1960s, the Essex was acquired by an American who had taken a vintage American car to New Zealand to participate in a classic rally there. Unfortunately, he was advised that his left-hand drive car was ineligible for the event. So, he purchased this right-hand drive 1925 Essex Roadster for the sole purpose of entering the rally. He used the Essex in the road rally and enjoyed the car so much that it was shipped to the United States, where it has remained ever since.
Eldon Hostetler acquired the car on September 18th of 1999 from an auction near Denver, Colorado. At the time, the car showed 26,047 miles on its odometer. Currently, the car has disc-type wheels, a rear-mounted spare, twin cowl lamps, a moto-meter, wind wings, and a toolbox affixed on the driver's side running board. The engine is a 144.6 cubic-inch L-head inline six-cylinder unit fitted with a single Stewart carburetor. There are a three-speed manual transmission and two-wheel (rear) mechanical brakes.By Daniel Vaughan | Jan 2019
2018 Worldwide Auctioneers : Hostetlers Hudson Auto Museum Auction
Sale Price :
USD $16,500
Recent Sales of the Essex Four
(Data based on Model Year 1925 sales)
1925 Essex Roadster Chassis#: MVIN309706IND Sold for USD$16,500 2018 Worldwide Auctioneers : Hostetlers Hudson Auto Museum Auction |
Essex Fours That Failed To Sell At Auction
1925 Essex Four's that have appeared at auction but did not sell.
Vehicle | Chassis | Event | High Bid | Est. Low | Est. High |
---|
Vehicles With Comparable Market Values
Similar sales to the $16,500 range.
1989 JEEP WRANGLER CUSTOM SUV Chassis#:2J4FY19EXKJ164428 Sold for $16,500 2024 Barrett-Jackson : Palm Beach | |
1982 MERCEDES-BENZ 380SL ROADSTER Chassis#:WDBBA45A2CB012964 Sold for $16,500 2024 Barrett-Jackson : Palm Beach | |
2014 MERCEDES-BENZ GL550 Chassis#:4JGDF7DE3EA323065 Sold for $16,500 2024 Barrett-Jackson : Palm Beach | |
1973 INTERNATIONAL 1100 PICKUP Chassis#:3Q1C0CHB52784 Sold for $16,500 2024 Barrett-Jackson : Palm Beach | |
2003 JEEP WRANGLER CUSTOM SUV Chassis#:1J4FA59S83P304871 Sold for $16,500 2024 Barrett-Jackson : Palm Beach | |
2001 CHEVROLET CORVETTE CONVERTIBLE Chassis#:1G1YY32G915103423 Sold for $16,500 2024 Barrett-Jackson : Palm Beach | |
2015 LAND ROVER RANGE ROVER SPORT HSE Chassis#:SALWR2VF7FA610935 Sold for $16,500 2024 Barrett-Jackson : Palm Beach | |
1963 TRIUMPH TR3B Chassis#:TCF1604L Sold for $16,500 2024 Barrett-Jackson : Palm Beach | |
2004 MERCEDES-BENZ CLK 500 CABRIOLET Chassis#:WDBTK75G64T030810 Sold for $16,500 2024 Barrett-Jackson : Palm Beach | |
1992 CHEVROLET CAMARO RS Chassis#:1G1FP23E3NL128188 Sold for $16,500 2024 Barrett-Jackson : Palm Beach | |
2005 DODGE MAGNUM SXT CUSTOM SPORT WAGON Chassis#:2D4FV48V95H649465 Sold for $16,500 2024 Barrett-Jackson : Palm Beach | |
1966 FIAT 500 F Chassis#:1248257 Sold for $16,500 2024 Barrett-Jackson : Palm Beach | |
2010 JAGUAR XK Chassis#:SAJWA4FB9ALB36039 Sold for $16,500 2024 Barrett-Jackson : Palm Beach | |
2008 FORD MUSTANG GT CALIFORNIA SPECIAL Chassis#:1ZVHT82H185149623 Sold for $16,500 2024 Barrett-Jackson : Palm Beach | |
1961 Studebaker Hawk Coupe Chassis#:61v24332 Sold for $16,500 2024 Mecum : Houston | |
2015 Infiniti QX80 SUV Chassis#:jn8az2nf5f9574279 Sold for $16,500 2024 Mecum : Houston | |
1993 GMC Suburban 1500 SLE Chassis#:1gkec16k3pj713107 Sold for $16,500 2024 Mecum : Houston | |
1984 Chevrolet C10 Silverado Pickup Chassis#:1gcdc14h1ej191315 Sold for $16,500 2024 Mecum : Houston | |
1992 Ford Mustang LX Convertible Chassis#:1facp44e9nf154545 Sold for $16,500 2024 Mecum : Houston | |
1976 Dodge Charger SE Chassis#:xs22n6r244409 Sold for $16,500 2024 Mecum : Houston |
1925 Essex Four
• Additional valuation insight and sales data• History
• Specifications
• Image gallery