Image credit: © conceptcarz.com (Reproduction Or reuse prohibited).
Engineer Walter Lorenzo Marr put Buick on a path that would become their hallmark, the Valve-in-Head engine with the valves placed directly above the pistons in what is generally known today as overhead valve configuration. The setup allows for better breathing resulting in more power and ultimately - better performance. The first Buick to be fitted with this design was the 1904 Model B.
The founder of the company, David Buick, lacked the business acumen needed to properly run the company. The savior was William C. Durant who was the head of Durant-Dort Carriage Company, was brought it by bankers to straighten out the messy management. The company would later become the cornerstone of the new General Motors that Durant was building. This, along with the help of the popular Model 10 Buick, helped place Buick into second place in the industry 1908, after Ford, through 1910.
Durant was forced out by the financiers in 1910 and his position was filled by a young Charles Nash and later by Walter Chrysler. By 1914, the company was building six-cylinder cars, abandoning fours briefly in 191, and seemingly for good in 1925.
As the years progressed, the entire industry began to up the ante in terms of horsepower, meaning the number of cylinders continued to increase. Must of the industry went to eight-cylinder engines as Buick remained with their six. For 1931, Buick introduced three straight-eight engines with each of the units sharing almost no tooling or parts to each other. John Dolza and chief Engineer Dutch Bower were the individuals responsible for this new design. The entry-level straight-eight unit had 221 cubic-inches of displacement and used for the 50 Series. The next engine in the line-up was a 272.6 cubic-inch engine used in the 60 Series, and the 80 and 90 series shared a big 344.8 cubic-inch powerplant that developed 104 brake horsepower. Over the next three decades, the Buick Company would produce only eight-cylinder engines.
Buick had introduced their new engines during the Great Depression, which meant that their sales fell, with their 1932 sales barely half those of 1931, with 1933 sales falling even more. For 1934, sales were aided by the introduction of the Knee Action independent front suspension and Harlow Curtice.
Harlow Herbert 'Red' Curtice was president of GM's AC Spark Plug division. He had joined Buick in October of 1933. He suggested that Buick needed a less expensive model that was smaller and lighter than other Buicks. In 1934, Buick introduced the Series 40. It used the Chevrolet-Pontiac 'A' body, and sold for as little as $795. The public responded, and sales rose 50 percent in 1934.
The Series 90 continued to reign as Buick's top-of-the-line model. Fitted with the overhead valve eight-cylinder engine that displaces 344.8 cubic-inches, it was capable of 116 horsepower. There were four-wheel mechanical drum brakes and a three-speed manual transmission.
This Series 96-C Convertible Coupe was purchased by Dr. Atwood in June of 1993. In 1995, it was given a restoration and upon completion, it was shown at the AACA Central Division Fall Meet and awarded the AACA President's Cup for 1995. A year later, it took Grand National First honors at Huntsville, Alabama.
The car is painted in black and has a tan canvas top. The interior and rumble seat are beige leather, and the instrument panel is wood-grained. The odometer shows 43,322 miles and the undercarriage is painted in gloss black.
In 2009, this Convertible Coupe was offered for sale at the Automobiles of Arizona auction presented by RM Auctions. The car was expected to sell for $130,000 - $180,000 and was offered without reserve. As bidding came to a close the lot had been sold for the sum of $187,000 including buyer's premium.By Daniel Vaughan | Apr 2009
The founder of the company, David Buick, lacked the business acumen needed to properly run the company. The savior was William C. Durant who was the head of Durant-Dort Carriage Company, was brought it by bankers to straighten out the messy management. The company would later become the cornerstone of the new General Motors that Durant was building. This, along with the help of the popular Model 10 Buick, helped place Buick into second place in the industry 1908, after Ford, through 1910.
Durant was forced out by the financiers in 1910 and his position was filled by a young Charles Nash and later by Walter Chrysler. By 1914, the company was building six-cylinder cars, abandoning fours briefly in 191, and seemingly for good in 1925.
As the years progressed, the entire industry began to up the ante in terms of horsepower, meaning the number of cylinders continued to increase. Must of the industry went to eight-cylinder engines as Buick remained with their six. For 1931, Buick introduced three straight-eight engines with each of the units sharing almost no tooling or parts to each other. John Dolza and chief Engineer Dutch Bower were the individuals responsible for this new design. The entry-level straight-eight unit had 221 cubic-inches of displacement and used for the 50 Series. The next engine in the line-up was a 272.6 cubic-inch engine used in the 60 Series, and the 80 and 90 series shared a big 344.8 cubic-inch powerplant that developed 104 brake horsepower. Over the next three decades, the Buick Company would produce only eight-cylinder engines.
Buick had introduced their new engines during the Great Depression, which meant that their sales fell, with their 1932 sales barely half those of 1931, with 1933 sales falling even more. For 1934, sales were aided by the introduction of the Knee Action independent front suspension and Harlow Curtice.
Harlow Herbert 'Red' Curtice was president of GM's AC Spark Plug division. He had joined Buick in October of 1933. He suggested that Buick needed a less expensive model that was smaller and lighter than other Buicks. In 1934, Buick introduced the Series 40. It used the Chevrolet-Pontiac 'A' body, and sold for as little as $795. The public responded, and sales rose 50 percent in 1934.
The Series 90 continued to reign as Buick's top-of-the-line model. Fitted with the overhead valve eight-cylinder engine that displaces 344.8 cubic-inches, it was capable of 116 horsepower. There were four-wheel mechanical drum brakes and a three-speed manual transmission.
This Series 96-C Convertible Coupe was purchased by Dr. Atwood in June of 1993. In 1995, it was given a restoration and upon completion, it was shown at the AACA Central Division Fall Meet and awarded the AACA President's Cup for 1995. A year later, it took Grand National First honors at Huntsville, Alabama.
The car is painted in black and has a tan canvas top. The interior and rumble seat are beige leather, and the instrument panel is wood-grained. The odometer shows 43,322 miles and the undercarriage is painted in gloss black.
In 2009, this Convertible Coupe was offered for sale at the Automobiles of Arizona auction presented by RM Auctions. The car was expected to sell for $130,000 - $180,000 and was offered without reserve. As bidding came to a close the lot had been sold for the sum of $187,000 including buyer's premium.By Daniel Vaughan | Apr 2009
2009 Automobiles of Arizona
Pre-Auction Estimates :
USD $130,000-USD $180,000
Sale Price :
USD $187,000
Recent Sales of the Buick Series 90
(Data based on Model Year 1934 sales)
1934 Buick Series 90 Club Sedan Chassis#: 2714839 Sold for USD$110,000 2011 RM Auctions - Automobiles of Amelia Island | |
1934 Buick Model 98C Convertible Phaeton Sold for USD$100,100 2009 Collector Cars of Fort Lauderdale | |
1934 Buick Model 90 Sold for USD$187,000 2009 Automobiles of Arizona | |
1934 Buick Model 90 Sold for USD$150,000 2009 The Scottsdale Auction : Gooding & Company |
Buick Series 90s That Failed To Sell At Auction
1934 Buick Series 90's that have appeared at auction but did not sell.
Vehicle | Chassis | Event | High Bid | Est. Low | Est. High |
---|
Vehicles With Comparable Market Values
Similar sales to the $136,775 range.
2007 Lamborghini Gallardo Spyder Convertible Chassis#:ZHWGU22TX7LA05652 Sold for $137,200 2024 Worldwide Auctioneers : Auburn Auction | |
1954 Chevrolet Corvette 'Bubble Top' Roadster Chassis#:E54S004483 Sold for $137,200 2024 Worldwide Auctioneers : Auburn Auction | |
2017 Audi R8 5.2 Quattro Spyder Chassis#:WUAVACFX7H7904409 Sold for $137,200 2024 Worldwide Auctioneers : Auburn Auction | |
1988 Ferrari 328 GTS Chassis#:zffxa20a6j0077233 Sold for $137,500 2024 Mecum : Monterey | |
1974 DeTomaso Pantera GTS Chassis#:thgtps07223 Sold for $137,500 2024 Mecum : Monterey | |
1961 Lincoln Continental Convertible Chassis#:1y86h411415 Sold for $137,500 2024 Mecum : Monterey | |
1938 Rolls-Royce 25/30 Custom Boattail Speedster Chassis#:gr063 Sold for $137,500 2024 Mecum : Monterey | |
1960 Mercedes-Benz 220 SE Cabriolet Chassis#:128.030.10.003553 Sold for $135,520 2024 Broad Arrow : Monterey | |
1955 Chevrolet Corvette Chassis#:VE55S001055 Sold for $137,200 2024 Broad Arrow : Monterey | |
1971 Chevrolet C30 Custom Truck Chassis#:ce331a630597 Sold for $137,500 2024 Mecum : Harrisburg | |
1969 Chevrolet COPO Camaro Chassis#:124379n676316 Sold for $137,500 2024 Mecum : Harrisburg | |
1953 Chevrolet Corvette Roadster Chassis#:e53f001115 Sold for $137,500 2024 Mecum : Indy | |
2005 Ferrari F430 Chassis#:zffew58a650142697 Sold for $137,500 2024 Mecum : Indy | |
1969 Chevrolet Camaro RS Z28 Chassis#:124379n660403 Sold for $137,500 2024 Mecum : Indy | |
1969 Chevrolet Camaro Z28 Chassis#:124379n636361 Sold for $137,500 2024 Mecum : Indy | |
1971 Ford F250 Crew Cab Pickup Chassis#:f26ycl62009 Sold for $137,500 2024 Mecum : Indy | |
1969 Chevrolet Camaro SS Chassis#:124379n546693 Sold for $137,500 2024 Mecum : Indy | |
1967 Plymouth Belvedere II Chassis#:rh23j71185769 Sold for $137,500 2024 Mecum : Indy | |
1969 Chevrolet Camaro RS Z28 Chassis#:124379n639128 Sold for $137,500 2024 Mecum : Indy | |
2023 Chevrolet Corvette Z06 3LZ Coupe Sold for $137,500 2024 Mecum : Indy |
1934 Buick Series 90
• Additional valuation insight and sales data• History
• Specifications
• Image gallery
• Other Buick Series 90 model years