conceptcarz.com


1979 Ford Ranchero Recall Information

Component

SEATS:MID/REAR ASSEMBLY

Manufacturer

FORD MOTOR COMPANY

NHTSA Campaign ID79V013000
SummaryTHE INVOLVED VEHICLES MAY HAVE BEEN BUILT WITH INCORRECT WELD NUTS THAT ATTACH THE REAR PORTION OF THE FRONT OUTBOARD SEAT TRACK TO THE FLOOR PAN. THE INCORRECT NUTS HAVE AN OVERSIZE DIAMETER AND THREAD, AND UPON FRONT SEAT TRACK ANCHOR BOLT INSTALLATION, THE THREADS MAY HAVE BEEN STRIPPED.
RemedyTHE DEALER WILL INSPECT AND, IF NECESSARY, REPAIR ANY STRIPPED WELD NUTS AND INSTALL LARGER SIZE BOLTS TO ANCHOR THE SEAT TRACK TO THE FLOOR AT NO COST TO OWNER.
NotesVEHICLE DESCRIPTION: PASSENGER VEHICLES.SYSTEM: INTERIOR; FLOOR PAN ATTACHMENTS.CONSEQUENCES OF DEFECT: IN THE EVENT OF A COLLISION, THE FRONT SEAT CANDISENGAGE FROM FLOOR MOUNTING CREATING THE POTENTIAL FOR SERIOUS PERSONALINJURY TO OCCUPANT.

Component

FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP

Manufacturer

INTERCONTINENTAL AUTO PARTS

NHTSA Campaign ID08E019000
SummaryINTERCONTINENTAL AUTO PARTS IS RECALLING 1,937 FUEL FILTERS, P/NOS ALG 44/1 AND PUROLATOR F10024, SHIPPED BETWEEN JANUARY 14 AND FEBRUARY 13, 2008, SOLD FOR USE ON THE VEHICLES LISTED ABOVE. THE FILTER'S OUTLET CAP MAY NOT BE SECURELY CRIMPED TO THE HOUSING. THIS COULD RESULT IN A SEPARATION OF FILTER'S OUTLET CAP FROM THE HOUSING.
ConsequenceIF THIS CONDITION OCCURS WHILE ATTEMPTING TO START THE VEHICLE, A NO START CONDITION MAY RESULT AND FUEL MAY BE PUMPED ONTO THE GROUND. IF THIS OCCURS WHILE THE VEHICLE IS IN MOTION, THE ENGINE MAY STOP DUE TO INADEQUATE FUEL SUPPLY. IF AN IGNITION SOURCE WERE PRESENT, FUEL LEAKAGE MAY RESULT IN A FIRE.
RemedyINTERCONTINENTAL WILL REPLACE THE FUEL FILTERS FREE OF CHARGE. THE RECALL BEGAN DURING MARCH 2008. OWNERS MAY CONTACT INTERCONTINENTAL AT 800-451-2593.
NotesTHIS RECALL ONLY PERTAINS TO INTERCONTINENTAL AFTERMARKET FUEL FILTERS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON VEHICLES MANUFACTURED BY THE FORD MOTOR COMPANY.CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV.

Component

WHEELS

Manufacturer

FORD MOTOR COMPANY

Mfr Report Date19780801
NHTSA Campaign ID78V237000
SummaryDUE TO AN ERROR IN THE VEHICLE ASSEMBLY COMPUTER BROADCAST PROGRAM, THE INVOLVED VEHICLES WERE EQUIPPED WITH 14X5.5 INCH WHEEL RIMS WHICH WERE INTENDED FOR USE ON PASSENGER CARS. THE TIRES WERE NOT MARKED WITH THE INFORMATION SPECIFIED BY FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 120, 'TIRE SELECTION AND RIMS FOR MOTOR VEHICLES OTHER THAN PASSENGER CARS'. AS A RESULT, A NON-COMPLIANCE EXISTS TO THIS STANDARD.
RemedyTHE EXISTING 14X5.5 INCH WHEELS WILL BE REPLACED WITH 14X6.0 INCH WHEELS.
NotesVEHICLE DESCRIPTION: TRUCKS.SYSTEM: WHEELS; SINGLE MAG.CONSEQUENCES OF DEFECT: USE OF WRONG SIZED WHEEL RIMS COULD IN SOME CASESRESULT IN PREMATURE TIRE WEAR WHICH COULD IN TURN CAUSE LOSS OF AIR FROM THETIRE, LOSS OF VEHICLE CONTROL AND AN ACCIDENT.

Component

STEERING:GEAR BOX:SHAFT SECTOR

Manufacturer

FORD MOTOR COMPANY

Mfr Report Date19781101
NHTSA Campaign ID78V269000
SummaryTHE STEERING GEARS ON THE INVOLVED VEHICLES MAY HAVE BEEN BUILT WITH IMPROPERLY MANUFACTURED SECTOR SHAFTS FROM WHICH THE THREADED PORTIONS OF THE SHAFTS MAY FRACTURE AND SEPARATE. SHOULD THE SECTOR SHAFT FRACTURE, THE PITMAN ARM MAY DISENGAGE FROM THE SPLINED PORTION OF THE SECTOR SHAFT.
RemedyTHE DEALER WILL INSPECT AND, IF NECESSARY, REPLACE THE STEERING GEAR ASSEMBLY OR INSTALL A NEW SECTOR SHAFT IN THE STEERING GEAR ASSEMBLY.
NotesVEHICLE DESCRIPTION: PASSENGER VEHICLES.SYSTEM: STEERING ASSEMBLY; GEARS.CONSEQUENCES OF DEFECT: DISENGAGEMENT WHILE VEHICLE IS IN MOTION COULD RESULTIN LOSS OF STEERING CONTROL, LOSS OF VEHICLE CONTROL, AND AN ACCIDENT.

Information provided by NHTSA
Data updated January 2021


Vehicle information, history, And specifications from concept to production.
Follow ConceptCarz on Facebook Follow ConceptCarz on Twitter Conceptcarz RSS News Feed

Conceptcarz.com
© 1998-2021 Conceptcarz.com Reproduction or reuse prohibited without written consent.