1967 Ford Mustang Recalls
1967 Ford Mustang Navigation
| Component | STEERING:LINKAGES:KNUCKLE:SPINDLE:ARM |
|---|---|
| Manufacturer | Drake Automotive Group LLC |
| NHTSA Campaign ID | 19E011000 |
| Summary | Drake Automotive Group, LLC (Drake) is recalling certain Scott Drake left and right wheel spindles, part numbers C5ZZ-3106-L, C5ZZ-3105-R, C70Z-3106-L, C70Z-3105-R sold for use on 1965-1966 Ford Mustang V8s and 1967-1969 Ford Mustangs (all vehicles with drums). The spindle may fail resulting in the wheel and tire detaching from the vehicle's steering system. |
| Consequence | Spindle failure can cause a loss of steering control, increasing the risk of a crash. |
| Remedy | Drake Automotive Group, LLC will notify owners and will replace all of the recalled units, free of charge. The recall began March 17, 2019. Owners may contact Drake automotive at 1-800-999-0289. |
| Notes | Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. |
| Component | STEERING:GEAR BOX (OTHER THAN RACK AND PINION) |
|---|---|
| Manufacturer | FORD MOTOR COMPANY |
| NHTSA Campaign ID | 66V004006 |
| Notes | MANUAL STEERING GEAR ASSEMBLIES MAY CONTAIN A DIMENSIONAL DISCREPANCY IN THE STEERING GEAR BALL ***** GROOVE.THIS DISCREPANCY CAN RESULT IN STEERING GEAR LOCK-UP AT LOW MILEAGE.(INSTALL NEW STEERING GEAR ASSEMBLY.) |
| Component | STRUCTURE:BODY |
|---|---|
| Manufacturer | FORD MOTOR COMPANY |
| NHTSA Campaign ID | 66V004005 |
| Notes | POSSIBLE THAT, UNDER CONDITIONS SUCH AS SHARP TURNS WHILE ASCENDING DRIVEWAY GRADES, THE LARGE SIZE TIRES LISTED WILL RUB AGAINST THE FRONT FENDER AND/OR WHEEL OPENING MOULDING.THIS CAUSES OBJECTIONABLE NOISE, AND IF DONE REPEATEDLY, WILL SCUFF THE OUTER EDGE OF THE TIRE.(REWORK FRONT FENDER WHEEL OPENING FLANGE AND REMOVE MOULDINGS TO ELIMINATE POSSIBLE INTERFERENCE.) |
| Component | STEERING: STEERING WHEEL/HANDLE BAR |
|---|---|
| Manufacturer | FORD MOTOR COMPANY |
| NHTSA Campaign ID | 67V112000 |
| Notes | POSSIBLE STEERING WHEEL SPOKE BREAKAGE INVOLVING ONE OR MORE OF THE METAL INSERTS WITHIN THE PLASTIC SPOKE.UNDER EXTENDED USAGE THE SEPARATION MAY EXTEND TO ALL THREE METAL INSERTS AND EVENTUALLY AFFECT STEERING CONTROL.(INSPECT AND REPLACE STEERING WHEELS AS NECESSARY.) |
| Component | STEERING: STEERING WHEEL/HANDLE BAR |
|---|---|
| Manufacturer | FORD MOTOR COMPANY |
| NHTSA Campaign ID | 67V091000 |
| Notes | POSSIBILITY THAT THE STEERING WHEEL RETAINING ***** WAS IMPROPERLY INSTALLED.THIS COULD ALLOW THE STEERING WHEEL TO BECOME LOOSE OR DISCONNECTED.(INSPECT AND SECURE STEERING WHEEL RETAINING ***** AS REQUIRED.) |
Data updated June 2024
1967 Ford Mustang Recall FAQs (show)
Q: Does the 1967 Ford Mustang have any vehicle recalls?
A: Yes, the 1967 Ford Mustang has atleast 5 recalls.Q: What are the 1967 Ford Mustang recalls?
A: The 1967 Ford Mustang recalls include: STEERING:LINKAGES:KNUCKLE:SPINDLE:ARM, STEERING:GEAR BOX (OTHER THAN RACK AND PINION), STRUCTURE:BODY, STEERING: STEERING WHEEL/HANDLE BAR, STEERING: STEERING WHEEL/HANDLE BAR.
A: Yes, the 1967 Ford Mustang has atleast 5 recalls.Q: What are the 1967 Ford Mustang recalls?
A: The 1967 Ford Mustang recalls include: STEERING:LINKAGES:KNUCKLE:SPINDLE:ARM, STEERING:GEAR BOX (OTHER THAN RACK AND PINION), STRUCTURE:BODY, STEERING: STEERING WHEEL/HANDLE BAR, STEERING: STEERING WHEEL/HANDLE BAR.
- 1967 Ford Mustang Menu
- Article
- Image gallery
- Valuation
- Specifications
- Recalls