conceptcarz.com

1987 BMW 325 Specifications

These are standard specifications for the 1987 BMW 325, not necessarily specifications for the vehicle(s) in the photo(s).
Engine Location : Front
Drive Type : Rear Wheel
Body / Chassis : Steel unibody
Production Years for Series : 1983 - 1991
Price : $21,480-$28,878
Weight : 2720 lbs | 1233.771 kg
Inline 6
Displacement : 2693 cc | 164.3 cu in. | 2.7 L.
Power : 121 HP (89.056 KW) @ 4250 RPM
Torque :170 Ft-Lbs (230 NM) @ 3250 RPM
Bore : 3.3 in | 84 mm.
Stroke : 3.2 in | 81 mm.
Compression : 9.0:1
Main Bearings : 7
Cylinder Block : Cast-iron
Cylinder Head : Light Alloy
Electronic Port Fuel Injection
Inline 6
Displacement : 2495 cc | 152.3 cu in. | 2.5 L.
Power : 168 BHP (123.648 KW) @ 5800 RPM
Torque :164 Ft-Lbs (222 NM) @ 4300 RPM
Bore : 3.3 in | 84 mm.
Stroke : 3.0 in | 75 mm.
Compression : 8.8:1
Cylinder Block : Cast-iron
Cylinder Head : Light Alloy
Electronic Port Fuel Injection
Transmission:
5 Manual with overdrive , 4 Automatic

Total BMW Production for 1987 : 87,839
1987 BMW 325
Component

VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM:HEATER CORE

Manufacturer

BAYERISCHE MOTOREN WERKE

Mfr Report Date19830101
NHTSA Campaign ID93V015000
SummaryTHE MALFUNCTION OR FAILURE OF A COOLANT SYSTEM COMPONENT RESULTS IN SIGNIFICANTLY INCREASED COOLANT TEMPERATURE AND A RESULTING INCREASE IN SYSTEM PRESSURE.
ConsequenceVEHICLES OPERATED UNDER THIS INCREASED COOLING SYSTEMPRESSURE CONDITION CAN SUFFER DAMAGE OR FAILURE OF PARTS OF THE COOLING SYSTEMSUCH AS (1) LEAKAGE FROM A COOLANT HOSE, (2) LEAKAGE OF THE RADIATOR OREXPANSION TANK, (3) DISCONNECTION OF A HOSE FROM A PIPE OR A FITTING, AND (4)CRACKS IN THE HEATER CORE END PIECE RESULTING IN COOLANT LEAKAGE. IN SOME CASES,BOILING COOLANT CAN CONTACT THE LOWER RIGHT LEG OF THE DRIVER RESULTING INBURNS. ALSO, ESCAPING COOLANT IN THE PASSENGER COMPARTMENT CAN CAUSE VAPORFOGGING OF THE INTERIOR SURFACE OF THE WINDOWS, REDUCING DRIVER VISIBILITY.
RemedyDEALERS WILL INSTALL A THERMOSTATIC BYPASS VALVE IN THE ENGINE COMPARTMENT TO CONTROL COOLANT TEMPERATURE IN THE HEATER CORE. ALSO, A NEW DESIGN RADIATOR CAP WILL BE INSTALLED, TO CONTROL PRESSURE AND PROVIDE GREATER COOLANT OVERFLOW IN THE EVENT OF OVERHEATING.
NotesSYSTEM: COOLANT SYSTEM.VEHICLE DESCRIPTION: PASSENGER CARS.

Component

EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH

Manufacturer

BAYERISCHE MOTOREN WERKE

Mfr Report Date19850701
NHTSA Campaign ID86V151000
SummaryBRAKE LIGHT SWITCH COULD OVERHEAT, EVENTUALLY LEADING TO MELTING OF PLASTIC INTERNAL PARTS IN AREA OF ELECTRICAL CONTACTS.
ConsequenceCONSEQUENCE OF DEFECT: SWITCH PLUNGER COULD JAM, RENDERING BRAKE LIGHTS EITHER INOPERATIVE OR CONTINUOUSLY ILLIMINATED, REGARDLESS OF BRAKE PEDAL OPERATION.
RemedyREPLACE BRAKE LIGHT SWITCH WITH REVISED SWITCH WITH INCREASED ELECTRICAL LOAD CAPACITY.
NotesSYSTEM: BRAKE LIGHT SWITCH. VEHICLE DESCRIPTION: PASSENGER CARS WITH HIGH BRAKE LIGHTS.

Information provided by NHTSA
Data updated January 2023
1987 Averages
Avg. Car Cost : $10,355
Avg. Household Income : $24,350
Avg. Home : $92,000
Avg. Gallon of Gas : $0.89
Avg. Stamp : $0

Popular frequently asked questions include:

What are the dimension and mechanical specifications of the 1987 BMW 325?
How many 1987 BMW 325 were produced?
How powerful was the 1987 BMW 325? Was the 1987 BMW 325 popular? Was the 1987 BMW 325 expensive? What was the fuel economy of the 1987 BMW 325?

Q: What is the wheelbase size of the 1987 BMW 325? A: The 1987 BMW 325 has a wheelbase size of 101.20 inches.

Q: What is the length of the 1987 BMW 325? A: The 1987 BMW 325 has a length of 176.80 inches.

Q: What is the width of the 1987 BMW 325? A: The 1987 BMW 325 has a width of 64.80 inches.

Q: How much did the 1987 BMW 325 cost when new?A: The 1987 BMW 325 cost approximately $21,480 to $28,878 (USD) when new.

Q: What were the bodystyles of the 1987 BMW 325? A: The 1987 BMW 325 was offered as a 325iC Convertible, Sedan.

Q: How many vehicles did BMW produce in 1987? A: BMW produced 87,839 automobiles in 1987.

Q: What engines did the 1987 BMW 325 have? A: The 1987 BMW 325 had the following engine options: Inline 6 (2693 cc | 164.3 cu in. | 2.7 L.) with 121 HP (89.056 KW) @ 4250 RPM and 170 Ft-Lbs (230 NM) @ 3250 RPM
  • Inline 6 (2495 cc | 152.3 cu in. | 2.5 L.) with 168 BHP (123.648 KW) @ 5800 RPM and 164 Ft-Lbs (222 NM) @ 4300 RPM
  • Q: What transmissions did the 1987 BMW 325 have? A: The 1987 BMW 325 had the following gearbox options: 5 speed Manual with overdrive, 4 speed Automatic.