conceptcarz.com

1989 Chevrolet Camaro Specifications

These are standard specifications for the 1989 Chevrolet Camaro, not necessarily specifications for the vehicle(s) in the photo(s).
Engine Location : Front
Drive Type : Rear Wheel
Body / Chassis : Unibody
Production Years for Series : 1982 - 1992
Price : $11,500-$19,000
Weight : 3075 lbs | 1394.797 kg
V 6 60-degree
Displacement : 2835 cc | 173.0 cu in. | 2.8 L.
Power : 135 HP (99.36 KW) @ 4900 RPM
Torque :160 Ft-Lbs (217 NM) @ 3900 RPM
Bore : 3.5 in | 89 mm.
Stroke : 3.0 in | 76 mm.
Compression : 8.9:1
Construction : Cast-iron block and head
Multi-port Fuel Injection
V 8
Displacement : 4998 cc | 305.0 cu in. | 5.0 L.
Power : 170.00 SAE @ 4000 RPM
Torque :255 Ft-Lbs (346 NM) @ 2400 RPM
Bore : 3.7 in | 95 mm.
Stroke : 3.5 in | 88 mm.
Compression : 9.3:1
Main Bearings : 5
Construction : Cast-iron block and head
Throttle-body fuel injection
V 8
Displacement : 4998 cc | 305.0 cu in. | 5.0 L.
Power : 195.00 SAE @ 4000 RPM
Torque :295 Ft-Lbs (400 NM) @ 2800 RPM
Bore : 3.7 in | 95 mm.
Stroke : 3.5 in | 88 mm.
Compression : 9.5:1
Main Bearings : 5
Construction : Cast-iron block and head
Tuned Port Fuel Injection System
V 8
Displacement : 4998 cc | 305.0 cu in. | 5.0 L.
Power : 220.00 SAE @ 4400 RPM
Torque :290 Ft-Lbs (393 NM) @ 3200 RPM
Bore : 3.7 in | 95 mm.
Stroke : 3.5 in | 88 mm.
Compression : 9.5:1
Main Bearings : 5
Construction : Cast-iron block and head
Tuned Port Fuel Injection System
V 8
Displacement : 5735 cc | 350.0 cu in. | 5.7 L.
Power : 230.00 SAE @ 4400 RPM
Torque :330 Ft-Lbs (447 NM) @ 3200 RPM
Bore : 4.0 in | 102 mm.
Stroke : 3.5 in | 88 mm.
Compression : 9.3:1
Main Bearings : 5
Construction : Cast-iron block and head
Tuned Port Fuel Injection System
Transmission:
5 Manual , Automatic

Total Chevrolet Production for 1989 : 1,275,498
Total 1989 Camaro production : 107,494
1989 Chevrolet Camaro
IROC-Z Convertible Coupe 2 dr. 4 P : 3,940
IROC-Z Coupe 2 dr. 4 P : 20,067
RS Convertible 2 dr. 4 P : 3,245
RS Coupe 2 dr. 4 P : 83,487

RS Coupe

Fuel Capacity : 15.5 Gal
Seating Capacity : 4
Doors : 2
Exterior
Length : 192.0 in | 4877 mm.
Width : 72.8 in | 1849 mm.
Height : 50.0 in | 1270 mm.
Wheelbase : 101.0 in | 2565 mm.
Front Track : 60.7 in | 1542 mm.
Rear Track : 61.6 in | 1565 mm.

RS Convertible

RS Convertible
Price : $17,000
Weight : 3000 lbs | 1360.777 kg
Fuel Capacity : 15.5 Gal
Seating Capacity : 4
Doors : 2
Exterior
Length : 192.0 in | 4877 mm.
Width : 72.8 in | 1849 mm.
Height : 50.0 in | 1270 mm.
Wheelbase : 101.0 in | 2565 mm.
Front Track : 60.7 in | 1542 mm.
Rear Track : 61.6 in | 1565 mm.

IROC-Z Coupe

IROC-Z Coupe
IROC-Z Coupe
Chassis # 1G1FP21F5KL127387
View info And history
IROC-Z Coupe
Chassis # Weaver 003
Price : $14,000
Weight : 3300 lbs | 1496.855 kg
Fuel Capacity : 15.5 Gal
Seating Capacity : 4
Doors : 2
Exterior
Length : 192.0 in | 4877 mm.
Width : 72.8 in | 1849 mm.
Height : 50.0 in | 1270 mm.
Wheelbase : 101.0 in | 2565 mm.
Front Track : 60.7 in | 1542 mm.
Rear Track : 61.6 in | 1565 mm.

IROC-Z Convertible Coupe

Price : $19,000
Fuel Capacity : 15.5 Gal
Seating Capacity : 4
Doors : 2
Exterior
Length : 192.0 in | 4877 mm.
Width : 72.8 in | 1849 mm.
Height : 50.0 in | 1270 mm.
Wheelbase : 101.0 in | 2565 mm.
Front Track : 60.7 in | 1542 mm.
Rear Track : 61.6 in | 1565 mm.

Suspension
Front : MacPherson struts with coil springs

Rear : Rigid axle and torque tube with longitudinal control arms, Panhard rod, coil springs and stabilizer bar

Steering
Recirculating Ball

Tires / Wheels
Tires : P215/65R15 steel-belted radial tires

Component

EQUIPMENT

Manufacturer

HONEYWELL INTERNATIONAL, INC.

NHTSA Campaign ID07E088000
SummaryCERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS ARE MARKED WITH A DATE CODE A61451 THROUGH A72571 SEQUENTIALLY. THE DATE CODE AND PART NUMBER APPEAR ON THE FILTER HOUSING. FRAM RACING HP4 AND HP8 OIL FILTERS NOT BEARING A DATE CODE IN THIS RANGE ARE NOT AFFECTED BY THIS RECALL. THE GASKET OF THE OIL FILTER BECOMES MORE PLIABLE UNDER HIGH TEMPERATURES AND PRESSURES.
ConsequenceTHIS CONDITION MAY CAUSE INADEQUATE SEALING AND LOSS OF ENGINE OIL, POSSIBLY RESULTING IN A FIRE.
RemedyHONEYWELL WILL REPLACE THE AFFECTED OIL FILTERS FREE OF CHARGE. THE RECALL BEGAN DURING NOVEMBER 2007. OWNERS CAN CONTACT FRAM CUSTOMER SERVICE TOLL-FREE AT 1-800-890-2075.
NotesCUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV.

Component

EXTERIOR LIGHTING

Manufacturer

PRO-A MOTORS, INC.

NHTSA Campaign ID06E026000
SummaryCERTAIN PRO-A MOTORS CORNER LAMPS, TURN SIGNALS, AND HEADLIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.
ConsequenceWITHOUT THE AMBER REFLECTORS, THE VEHICLE WILL BE POORLY ILLUMINATED, POSSIBLY RESULTING IN A VEHICLE CRASH WITHOUT WARNING.
RemedyPRO-A MOTORS WILL NOTIFY OWNERS AND OFFER TO REPURCHASE THE LAMPS. THE RECALL BEGAN ON APRIL 3, 2006. OWNERS MAY CONTACT PRO-A MOTORS AT 323-838-2988.
NotesTHIS RECALL ONLY PERTAINS TO PRO-A MOTORS AFTERMARKET LAMPS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON THE LISTED PASSENGER VEHICLES.FOR MORE INFORMATION ON THE LAMP MODEL NUMBERS, CLICK ON DOCUMENT SEARCH AND VIEW DOCUMENT TITLED 'LAMP MODEL NUMBERS.'CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV.

Component

FUEL SYSTEM, GASOLINE

Manufacturer

HONEYWELL INTERNATIONAL, INC.

NHTSA Campaign ID06E043000
SummaryCERTAIN REPLACEMENT FUEL FILTERS, FRAM BRAND NAME P/N G3727, WITH DATE CODES X52911 THROUGH X60801 SEQUENTIALLY OR X600141 AND A MEXICO COUNTRY OR ORIGIN MARKING ON THE FUEL FILTER HOUSING MANUFACTURED FROM OCTOBER 18, 2005, THROUGH MARCH 21, 2006, SOLD FOR USE ON THE VEHICLES LISTED ABOVE AND ON CERTAIN SCHOOL BUSES. (TO SEE THE SCHOOL BUS ENGINE SIZES, CLICK ON 'DOCUMENT SEARCH' AND THEN 'BUS APPLICATIONS'). THE CONNECTOR ON THE FUEL FILTER WAS NOT MANUFACTURED TO HONEYWELL'S SPECIFICATION. AS A RESULT, THE O-RING MAY NOT SEAT CORRECTLY ON THE FUEL LINE.
ConsequenceTHIS CONDITION MAY CAUSE AN INADEQUATE SEAL AT THE CONNECTION, POTENTIALLY LEADING TO A FUEL LEAK. IN THE PRESENCE OF AN IGNITION SOURCE, A FIRE COULD OCCUR.
RemedyHONEYWELL WILL NOTIFY OWNERS AND REPLACE THE FUEL FILTERS FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 18, 2006. OWNERS MAY CONTACT FRAM CUSTOMER SERVICE AT 1-800-890-2075 (OPTION 1).
NotesTHIS RECALL ONLY PERTAINS TO AFTERMARKET FRAM FUEL FILTERS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON THE VEHICLES LISTED.CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV.

Component

SEAT BELTS:FRONT:BUCKLE ASSEMBLY

Manufacturer

GENERAL MOTORS CORP.

Mfr Report Date19830901
NHTSA Campaign ID90V105000
SummaryPLASTIC COMPONENTS OF SEAT BELT BUCKLE ASSEMBLIES DO NOT CONTAIN AN ULTRA VIOLET STABILIZER, AND EXPOSURE TO DIRECT SUNLIGHT AND ELEVATED INTERIOR TEMPERATURES COULD WEAKEN THE PLASTIC COMPONENTS.
ConsequenceTHIS COULD RESULT IN BREAKAGE OF PLASTIC COMPONENTS WHICHCOULD PREVENT BUCKLE FROM LATCHING AND PROTECTING OCCUPANT IN A SUDDEN STOP ORACCIDENT.
RemedyREPLACE OR REPAIR SEAT BELT BUCKLE.
NotesSYSTEM: SEAT BELT BUCKLE.VEHICLE DESCRIPTION: PASSENGER CARS.

Component

FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS

Manufacturer

GENERAL MOTORS CORP.

Mfr Report Date19880401
NHTSA Campaign ID90V115000
SummaryFUEL FEED HOSES MAY PULL OUT OF THE CRIMPED COUPLING AT THE ENGINE END OF THE HOSE ASSEMBLY.
ConsequenceIF THIS COUPLING SEPARATED, ALLOWING GASOLINE TO LEAK,AND AN IGNITION SOURCE IS PRESENT, AN ENGINE COMPARTMENT FIRE COULD OCCUR.
RemedyINSTALL A REDESIGNED FUEL FEED HOSE.
NotesSYSTEM: FUEL FEED HOSES.VEHICLE DESCRIPTION: PASSENGER CARS WITH 2.8L V6 ENGINES.

Component

SEAT BELTS

Manufacturer

GENERAL MOTORS CORP.

Mfr Report Date19880901
NHTSA Campaign ID88V191000
SummaryWEBBING ON THE BUCKLE PORTION OF THE REAR LAP/SHOULDER BELTS MAY BE TOO LONG.
ConsequenceIN THE EVENT OF A SEVERE VEHICLE CRASH, THE EFFECTIVENESSOF THE LAP/SHOULDER BELT MAY BE REDUCED.
RemedyREPLACE REAR INBOARD SEAT BELTS WITH BELTS OF THE PROPER LENGTH.
NotesSYSTEM: REAR INBOARD SEAT BELT.VEHICLE DESCRIPTION: CONVERTIBLE TOP PASSENGER CARS.

Information provided by NHTSA
Data updated January 2023
1989 Averages
Avg. Car Cost : $15,350
Avg. Household Income : $27,450
Avg. Home : $120,000
Avg. Gallon of Gas : $0.97
Avg. Stamp : $0

Popular frequently asked questions include:

What are the dimension and mechanical specifications of the 1989 Chevrolet Camaro?
How many 1989 Chevrolet Camaro were produced?
How powerful was the 1989 Chevrolet Camaro? Was the 1989 Chevrolet Camaro popular? Was the 1989 Chevrolet Camaro expensive? What was the fuel economy of the 1989 Chevrolet Camaro?

Q: What is the wheelbase size of the 1989 Chevrolet Camaro? A: The 1989 Chevrolet Camaro has a wheelbase size of 101.00 inches.

Q: What is the length of the 1989 Chevrolet Camaro? A: The 1989 Chevrolet Camaro has a length of 192.00 inches.

Q: What is the width of the 1989 Chevrolet Camaro? A: The 1989 Chevrolet Camaro has a width of 72.80 inches.

Q: How much did the 1989 Chevrolet Camaro cost when new?A: The 1989 Chevrolet Camaro cost approximately $11,500 to $19,000 (USD) when new.

Q: What were the bodystyles of the 1989 Chevrolet Camaro? A: The 1989 Chevrolet Camaro was offered as a IROC-Z Convertible Coupe, IROC-Z Coupe, RS Convertible, RS Coupe.

Q: What tires did the 1989 Chevrolet Camaro have? A: The 1989 Chevrolet Camaro had P215/65R15 steel-belted radial tires tires.

Q: How many vehicles did Chevrolet produce in 1989? A: Chevrolet produced 1,275,498 automobiles in 1989.

Q: How many 1989 Camaros were produced? A: Chevrolet produced 107,494 examples of the Camaro in 1989.

Q: What engines did the 1989 Chevrolet Camaro have? A: The 1989 Chevrolet Camaro had the following engine options: V 6 (2835 cc | 173.0 cu in. | 2.8 L.) with 135 HP (99.36 KW) @ 4900 RPM and 160 Ft-Lbs (217 NM) @ 3900 RPM
  • V 8 (4998 cc | 305.0 cu in. | 5.0 L.) with 170.00 SAE @ 4000 RPM and 255 Ft-Lbs (346 NM) @ 2400 RPM
  • V 8 (4998 cc | 305.0 cu in. | 5.0 L.) with 195.00 SAE @ 4000 RPM and 295 Ft-Lbs (400 NM) @ 2800 RPM
  • V 8 (4998 cc | 305.0 cu in. | 5.0 L.) with 220.00 SAE @ 4400 RPM and 290 Ft-Lbs (393 NM) @ 3200 RPM
  • V 8 (5735 cc | 350.0 cu in. | 5.7 L.) with 230.00 SAE @ 4400 RPM and 330 Ft-Lbs (447 NM) @ 3200 RPM

    • Q: What transmissions did the 1989 Chevrolet Camaro have? A: The 1989 Chevrolet Camaro had the following gearbox options: 5 speed Manual, Automatic.

    Chevrolet

    Vehicles
    News
    Concepts
    Recalls
    Chevrolet Sales Volume

    Similar Vehicles

    Pontiac Firebird 1989 Pontiac Firebird

    Similar Automakers

    Cadillac
    Chrysler
    Dodge
    Ford
    GMC
    Hummer
    Jeep
    Lincoln
    Mercury
    Pontiac
    Saturn

    Similarly Sized Vehicles
    from 1989

    Aston Martin V-8
    Buick Reatta
    Buick Regal NASCART Stock Car
    Cadillac Allante
    Ford Thunderbird
    Jaguar XJ-S
    Lamborghini LM002
    Maserati 228
    Mercury Cougar
    Pontiac Firebird

    Chevrolet Monthly Sales Volume

    March 2023
    398,141
    Additional Sales Volume Data