These are standard specifications for the 1960 Ferrari 250 GTE, not necessarily specifications for the vehicle(s) in the photo(s).
Transmission:
4 Manual All-synchro
Chassis # 2367GT
Chassis # 2169 GT
Engine # 2169 GT
View info And history
Features
| Engine Location : | Front |
| Drive Type : | Rear Wheel |
| Body / Chassis : | Separate body on tubular steel ladder-type frame |
| Production Years for Series : | 1959 - 1963 |
| Body Designer : | Pininfarina |
| Chassis Range : | 1895 - 4961 |
Engine & Transmission
| V 12 60-degree | Colombo | Vee-Type | |
|---|---|
| Displacement : | 2950 cc | 180.0 cu in. | 3.0 L. |
| Power : | 240 BHP (176.64 KW) @ 7000 |
| Torque : | 195 Ft-Lbs (264 NM) @ 5000 RPM |
| Bore : | 2.9 in | 73 mm. |
| Stroke : | 2.3 in | 59 mm. |
| Compression : | 9.2:1 |
| Main Bearings : | 7 |
| Construction : | Aluminum block and head |
| 3 Weber 2-choke carburetors | |
4 Manual All-synchro
Production Figures
| 250 GTE Production (1959-1963) : | 356 |
| 1960 Ferrari 250 GTE | |
Dimension(s)
Notchback
Chassis # 2367GT
Chassis # 2169 GT
Engine # 2169 GT
View info And history
| Body Designer : | Pininfarina |
| Doors : | 2 |
| Exterior | |
|---|---|
| Length : | 185.0 in | 4699 mm. |
| Width : | 65.0 in | 1651 mm. |
| Wheelbase : | 102.3 in | 2598 mm. |
| Front Track : | 53.3 in | 1354 mm. |
| Rear Track : | 54.7 in | 1389 mm. |
Handling
| Suspension | |
|---|---|
| Front : Upper/lower A-arms with coil springs Rear : Rigid axle with parallel trailing arms and semi-elliptic leaf springs | |
| Steering | |
|---|---|
| Worm and Peg |
1960 Averages
| Avg. Car Cost : | $2,600 |
| Avg. Household Income : | $5,315 |
| Avg. Home : | $12,700 |
| Avg. Gallon of Gas : | $0.31 |
| Total Car Production : | 7,905,119 |
1960 Ferrari 250 GTE FAQs (show)
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1960 Ferrari 250 GTE?
Q: What is the wheelbase size of the 1960 Ferrari 250 GTE? A: The 1960 Ferrari 250 GTE has a wheelbase size of 102.30 inches.Q: What is the length of the 1960 Ferrari 250 GTE? A: The 1960 Ferrari 250 GTE has a length of 185.00 inches.Q: What is the width of the 1960 Ferrari 250 GTE? A: The 1960 Ferrari 250 GTE has a width of 65.00 inches.Q: What is the bodystyle of the 1960 Ferrari 250 GTE? A: The 1960 Ferrari 250 GTE was a Notchback.Q: How many 250 GTE were produced? A: Ferrari produced 356 examples of the 250 GTE from 1959 to 1963.Q: What engine did the 1960 Ferrari 250 GTE have? A: The engine powering the 1960 Ferrari 250 GTE was a V 12Vee-Type (2950 cc | 180.0 cu in. | 3.0 L.) with 240 BHP (176.64 KW) @ 7000 and 195 Ft-Lbs (264 NM) @ 5000 RPM. Q: What transmission did the 1960 Ferrari 250 GTE have? A: The 1960 Ferrari 250 GTE had a 4 speed Manual All-synchro gearbox.