| Component | EQUIPMENT |
|---|---|
| Manufacturer | HONEYWELL INTERNATIONAL, INC. |
| NHTSA Campaign ID | 07E088000 |
| Summary | CERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS ARE MARKED WITH A DATE CODE A61451 THROUGH A72571 SEQUENTIALLY. THE DATE CODE AND PART NUMBER APPEAR ON THE FILTER HOUSING. FRAM RACING HP4 AND HP8 OIL FILTERS NOT BEARING A DATE CODE IN THIS RANGE ARE NOT AFFECTED BY THIS RECALL. THE GASKET OF THE OIL FILTER BECOMES MORE PLIABLE UNDER HIGH TEMPERATURES AND PRESSURES. |
| Consequence | THIS CONDITION MAY CAUSE INADEQUATE SEALING AND LOSS OF ENGINE OIL, POSSIBLY RESULTING IN A FIRE. |
| Remedy | HONEYWELL WILL REPLACE THE AFFECTED OIL FILTERS FREE OF CHARGE. THE RECALL BEGAN DURING NOVEMBER 2007. OWNERS CAN CONTACT FRAM CUSTOMER SERVICE TOLL-FREE AT 1-800-890-2075. |
| Notes | CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV. |
| Component | STEERING: STEERING WHEEL/HANDLE BAR |
|---|---|
| Manufacturer | GENERAL MOTORS CORP. |
| NHTSA Campaign ID | 76V132000 |
| Notes | GENERAL MOTOR CAMPAIGN NO 77-C-1.POSSIBILITY THAT THE STEERING INTERMEDIATESHAFT MAY HAVE BEEN ASSEMBLED WITH COUPLING RETAINER LOCKING TABS NOT BENT OVERPROPERLY OR ONE OR MORE OF THE LOWER FLEXIBLE COUPLING RIVETS IMPROPERLYPEENED.IF EITHER OF THESE CONDITIONS EXISTS, THE INTERMEDIATE SHAFT ASSEMBLYCOULD SEPARATE CAUSING LOSS OF STEERING CONTROL, AND VEHICLE CRASH MAY OCCURWITHOUT PRIOR WARNING.(CORRECT BY INSPECTING, AND REPLACING SHAFT WHERENECESSARY).PASSENGER VEHICLE. |
| Component | SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DIFFERENTIAL PROPORTIONAL VALVE |
|---|---|
| Manufacturer | GENERAL MOTORS CORP. |
| NHTSA Campaign ID | 76V088000 |
| Notes | CHEVROLET CAMPAIGN NO 76C16.POSSIBILITY THAT AN INCORRECT BRAKE COMBINATIONVALVE WAS INSTALLED DURING PRODUCTION.IF THIS CONDITION EXISTS, IT MAYDECREASE THE STOPPING ABILITY AND THUS INCREASE THE POSSIBILITY OF A VEHICLECRASH WHEN BRAKING.SITUATION REQUIRES MINIMUM STOPPING DISTANCE.ALSO,BRAKING SYSTEM MAY NOT MEET PERFORMANCE REQUIREMENT OF FMVSS 105.(CORRECT BYINSPECTING AND REPLACING VALVE WITH PROPER TYPE VALVE NECESSARY). |
Data updated January 2023
1976 Chevrolet Camaro Recall FAQs (show)
Q: Does the 1976 Chevrolet Camaro have any vehicle recalls?
A: Yes, the 1976 Chevrolet Camaro has atleast 3 recalls.Q: What are the 1976 Chevrolet Camaro recalls?
A: The 1976 Chevrolet Camaro recalls include: EQUIPMENT, STEERING: STEERING WHEEL/HANDLE BAR, SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DIFFERENTIAL PROPORTIONAL VALVE.
A: Yes, the 1976 Chevrolet Camaro has atleast 3 recalls.Q: What are the 1976 Chevrolet Camaro recalls?
A: The 1976 Chevrolet Camaro recalls include: EQUIPMENT, STEERING: STEERING WHEEL/HANDLE BAR, SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DIFFERENTIAL PROPORTIONAL VALVE.