These are standard specifications for the 1972 Peugeot 504, not necessarily specifications for the vehicle(s) in the photo(s).
Transmission:
4 Manual , Automatic
Information provided by NHTSA
Data updated January 2023
Features
| Engine Location : | Front |
| Drive Type : | Rear Wheel |
| Body Designer : | Pininfarina |
| Price : | $3,740 |
| Weight : | 2530 lbs | 1147.589 kg |
Engine & Transmission
| Inline 4 | |
|---|---|
| Displacement : | 1971 cc | 120.3 cu in. | 2.0 L. |
4 Manual , Automatic
Production Figures
| Total Peugeot Production for 1972 : | 604,421 |
| 1972 Peugeot 504 | |
Handling
Recall
| Component | VISIBILITY:REARVIEW MIRRORS/DEVICES:INTERIOR |
|---|---|
| Manufacturer | PEUGEOT, INC. |
| NHTSA Campaign ID | 74V068000 |
| Notes | PEGEOT CAMPAIGN NO 74B-2041.POSSIBILITY THAT THE INTERIOR REAR VIEW MIRRORMOUNTING STEMS MAY BE DEFECTIVE.(CORRECT BY INSPECTING AND MODIFYING MIRRORMOUNTING STEM). |
| Component | VISIBILITY:WINDSHIELD |
|---|---|
| Manufacturer | PEUGEOT, INC. |
| Mfr Report Date | 19700101 |
| NHTSA Campaign ID | 73V199000 |
| Notes | PEUGEOT CAMPAIGN NO 73B/2029.SEDAN.POSSIBILITY THAT THE RUBBER WINDSHIELDMOLDING HAVE A HARDNESS LEVEL BELOW DESIGN SPECIFICATIONS.IF THIS CONDITIONEXISTS THE WINDSHIELD WILL NOT BE RETAINED AS REQUIRED BY FEDERAL MOTOR VEHICLESAFETY STANDARD 212, WHEN VEHICLE IS IMPACTED AT 30 MPH INTO A FIXED COLLISIONBARRIER.(CORRECT BY INSPECTING AND REPLACING WITH NEW IMPROVED MOLDINGS). |
| Component | SEAT BELTS:FRONT:WEBBING |
|---|---|
| Manufacturer | PEUGEOT, INC. |
| Mfr Report Date | 19711101 |
| NHTSA Campaign ID | 72V104000 |
| Notes | PEUGEOT SERVICE BULLETIN NO 72B/2020.STATION WAGON.POSSIBILITY THAT FRONTSHOULDER BELT AND BUCKLE-STRAP ASSEMBLY WHICH IS ATTACHED TO FLOOR ARE TOOSHORT WHEN FRONT SEATS ARE IN FORWARD POSITION.IN THIS CASE, CERTAINPASSENGERS MAY FIND SHOULDER BELTS TOO SHORT TO BE FASTENED TO LAP BELT HOOKS,WHEN INSERTED IN BUCKLE-STRAP ASSEMBLY.LAP BELT PORTION OF FRONT SEAT BELTS,ALONE, ARE NOTDEFECTIVE AND WILL WORK IN ALL SEAT POSITIONS.(CORRECT BYINSTALLING NEW MODIFIED SHOULD STRAPS AND BUCKLE STRAPS.) |
| Component | SEAT BELTS:FRONT |
|---|---|
| Manufacturer | PEUGEOT, INC. |
| Mfr Report Date | 19711101 |
| NHTSA Campaign ID | 73V223000 |
| Notes | BUILT NOV 1971 THRU NOV 1973.POSSIBILITY THAT VEHICLES EQUIPPED WITH BACKREST HINGE FLANGE, THE EDGE COULD CAUSE ABNORMAL CHAFING OF THE SEAT BELTBUCKLE STRAP, WHICH RESTS AGAINST THE FLANGE WHEN OCCUPANT FASTEN SEAT BELT.(CORRECT BY INSPECTING AND PLACING A PROTECTIVE COVERING OVER FLANGE EDGE). |
Data updated January 2023
1972 Averages
| Avg. Household Income : | $11,800 |
| Avg. Home : | $27,550 |
| Avg. Gallon of Gas : | $0.55 |
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1972 Peugeot 504?
Q: What is the wheelbase size of the 1972 Peugeot 504? A: The 1972 Peugeot 504 has a wheelbase size of 108.00 inches.Q: What is the length of the 1972 Peugeot 504? A: The 1972 Peugeot 504 has a length of 177.00 inches.Q: What is the width of the 1972 Peugeot 504? A: The 1972 Peugeot 504 has a width of 66.50 inches.Q: How much did the 1972 Peugeot 504 cost when new?A: The 1972 Peugeot 504 had a base price of approximately $3,740 (USD).Q: What is the bodystyle of the 1972 Peugeot 504? A: The 1972 Peugeot 504 was a Cabriolet.Q: How many vehicles did Peugeot produce in 1972? A: Peugeot produced 604,421 automobiles in 1972.Q: What engine did the 1972 Peugeot 504 have? A: The engine powering the 1972 Peugeot 504 was a Inline 4 (1971 cc | 120.3 cu in. | 2.0 L.). Q: What transmissions did the 1972 Peugeot 504 have? A: The 1972 Peugeot 504 had the following gearbox options: 4 speed Manual, Automatic.