These are standard specifications for the 1975 Chrysler Cordoba, not necessarily specifications for the vehicle(s) in the photo(s).
Information provided by NHTSA
Data updated January 2023
Features
| Engine Location : | Front |
| Drive Type : | Rear Wheel |
| Production Years for Series : | 1975 - 1979 |
| Price : | $5,580 |
| Weight : | 4035 lbs | 1830.245 kg |
Engine & Transmission
| V 8 | |
|---|---|
| Displacement : | 5211 cc | 318.0 cu in. | 5.2 L. |
| Power : | 150 BHP (110.4 KW) @ 4000 RPM |
| Bore : | 3.9 in | 99 mm. |
| Stroke : | 3.3 in | 84 mm. |
| Compression : | 8.5:1 |
| Main Bearings : | 5 |
| Cylinder Block : | Cast-iron |
| 2-barrel carburetor | |
Production Figures
| Total Chrysler Production for 1975 : | 251,549 |
| 1975 Chrysler Cordoba | |
| Hardtop Coupe : | 150,105 |
Handling
Recall
| Component | VEHICLE SPEED CONTROL |
|---|---|
| Manufacturer | CHRYSLER CORPORATION |
| NHTSA Campaign ID | 76V008000 |
| Notes | CHRYSLER CAMPAIGN NO 206.EQUIPPED WITH 360/2 BARREL ENGINES AND AUTOMATICSPEED CONTROLS.POSSIBILITY THAT THE AUTOMATIC SPEED CONTROL LINKAGE MAY HAVEBEEN ASSEMBLED IN A MANNER WHICH MAY ALLOW THE SPEED CONTROL LOST MOTION LINKTO TRAVEL OVERCENTER WHEN THE ACCELERATOR PEDAL IS PUSHED TO THE WIDE OPENTHROTTLE POSITION.IF THIS OCCURS, IT CAN RESULT IN THE CARBURETOR BEING HELDAT WIDE OPEN POSITION.(CORRECT BY INSPECTING AND INSTALLING A SUPPORT CLIP TORESTRICT TRAVEL OF SPEED CONTROL LINKAGE). |
| Component | FUEL SYSTEM, GASOLINE:CARBURETOR SYSTEM |
|---|---|
| Manufacturer | CHRYSLER CORPORATION |
| Mfr Report Date | 19740801 |
| NHTSA Campaign ID | 78V020000 |
| Summary | WHEN THE ACCELERATOR PEDAL ON THE INVOLVED VEHICLES IS DEPRESSED AND THE ACCELERATOR PUMP IS ACTIVATED, A DISTORTED ACCELERATOR PUMP SEAL IN THE CARBURETOR MAY PREVENT THE PUMP FROM DELIVERING THE PROPER AMOUNT OF FUEL. |
| Remedy | DEALER WILL REPLACE THE CARBURETOR ACCELERATOR PUMP SEAL WITH A SEAL OF IMPROVED DISTORTION RESISTANCE. THE CARBURETOR WILL ALSO BE CHECKED FOR THE PROPER FLOAT LEVEL. |
| Notes | VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH 225 OR 318 CID ENGINES.SYSTEM: FUEL; CARBURETOR ACCELERATOR PUMP SEAL.CONSEQUENCES OF DEFECT: THIS MAY RESULT IN HESITATION OR LACK OF RESPONSE WHENDRIVER ATTEMPTS TO ACCELERATE. ENGINE STALLING MAY OCCUR IN SOME CASES; THISCOULD LEAD TO A VEHICLE ACCIDENT IN CERTAIN TRAFFIC SITUATIONS. |
Data updated January 2023
1975 Averages
| Avg. Car Cost : | $4,250 |
| Avg. Household Income : | $14,100 |
| Avg. Home : | $39,300 |
| Avg. Gallon of Gas : | $0.44 |
1975 Chrysler Cordoba FAQs (show)
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1975 Chrysler Cordoba?
Q: What is the wheelbase size of the 1975 Chrysler Cordoba? A: The 1975 Chrysler Cordoba has a wheelbase size of 115.00 inches.Q: What is the length of the 1975 Chrysler Cordoba? A: The 1975 Chrysler Cordoba has a length of 215.30 inches.Q: How much did the 1975 Chrysler Cordoba cost when new?A: The 1975 Chrysler Cordoba had a base price of approximately $5,580 (USD).Q: What is the bodystyle of the 1975 Chrysler Cordoba? A: The 1975 Chrysler Cordoba was a Hardtop Coupe.Q: How many vehicles did Chrysler produce in 1975? A: Chrysler produced 251,549 automobiles in 1975.Q: What engine did the 1975 Chrysler Cordoba have? A: The engine powering the 1975 Chrysler Cordoba was a V 8 (5211 cc | 318.0 cu in. | 5.2 L.) with 150 BHP (110.4 KW) @ 4000 RPM.