These are standard specifications for the 1980 Saab 900, not necessarily specifications for the vehicle(s) in the photo(s).
Transmission:
4 Manual
Information provided by NHTSA
Data updated January 2023
Features
| Engine Location : | Front |
| Drive Type : | Front Wheel |
| Body / Chassis : | Steel unibody |
| Production Years for Series : | 1979 - 1994 |
| Price : | $9,290-$13,690 |
| Weight : | 2635 lbs | 1195.216 kg |
Engine & Transmission
| Inline 4 | |
|---|---|
| Displacement : | 1985 cc | 121.1 cu in. | 2.0 L. |
| Power : | 110 BHP (80.96 KW) @ 5250 RPM |
| Torque : | 119 Ft-Lbs (161 NM) @ 3500 RPM |
| Bore : | 3.5 in | 90 mm. |
| Stroke : | 3.1 in | 78 mm. |
| Compression : | 9.25:1 |
| Main Bearings : | 5 |
| Cylinder Block : | Cast-iron |
| Cylinder Head : | Light Alloy |
| Turbocharged Inline 4 | |
|---|---|
| Displacement : | 1985 cc | 121.1 cu in. | 2.0 L. |
| Power : | 135 BHP (99.36 KW) @ 4800 RPM |
| Torque : | 160 Ft-Lbs (217 NM) @ 3500 RPM |
| Bore : | 3.5 in | 90 mm. |
| Stroke : | 3.1 in | 78 mm. |
| Compression : | 7.2:1 |
| Main Bearings : | 5 |
| Cylinder Block : | Cast-iron |
| Cylinder Head : | Light Alloy |
| Bosch electronic port fuel injection | |
4 Manual
Production Figures
| Total Saab Production for 1980 : | 65,754 |
| 1980 Saab 900 | |
Handling
Recall
| Component | POWER TRAIN:AUTOMATIC TRANSMISSION |
|---|---|
| Manufacturer | SAAB CARS USA, INC. |
| Mfr Report Date | 19771001 |
| NHTSA Campaign ID | 83V068000 |
| Summary | A PROBLEM RELATING TO THE FRONT EXHAUST PIPE BRACKET ATTACHMENT COULD CAUSE LEAKING OF TRANSMISSION OIL. TRANSMISSION COULD LOCK UP DUE TO LACK OF PROPER OIL LUBRICATION. |
| Remedy | DEALER WILL REPLACE THE EXISTING EXHAUST PIPE BRACKET WITH ONE THAT ATTACHES TO THE SIDE OF THE TRANSMISSION. THE REAR DIFFERENTIAL COVER GASKET WILL ALSO BE REPLACED, USING SCREWS INSTEAD OF STUDS. |
| Notes | VEHICLE DESCRIPTION: PASSENGER VEHICLES.SYSTEM: FUEL; EXHAUST PIPE BRACKET ATTACHMENT.CONSEQUENCES OF DEFECT: TRANSMISSION LOCK UP COULD RESULT IN AN ACCIDENT ANDPERSONAL INJURY.NOTE: UNTIL THE PROBLEM IS CORRECTED, OWNER SHOULD ENSURE THAT THE TRANSMISSIONOIL IS KEPT AT AN ADEQUATE LEVEL. IF THE OIL LEVEL SINKS TOO LOW, THEDIFFERENTIAL MAY BEGIN TO WHINE AND IT MAY BECOME INCREASINGLY DIFFICULT TOCHANGE GEARS. |
| Component | FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM |
|---|---|
| Manufacturer | SAAB CARS USA, INC. |
| Mfr Report Date | 19790901 |
| NHTSA Campaign ID | 80V123000 |
| Summary | THE POSSIBILITY EXISTS THAT THE MOUNTING COLLAR FOR THE ELECTRIC FUEL PUMP, SUBMERGED IN THE FUEL, COULD PARTIALLY DETACH FROM THE TOP OF THE TANK AND CAUSE A FUEL LEAK. |
| Remedy | DEALER WILL REPLACE THE FUEL PUMP SUPPORT AND REMOUNT THE PUMP AT NO CHARGE TO OWNER. |
| Notes | VEHICLE DESCRIPTION: PASSENGER VEHICLES.SYSTEM: FUEL; ELECTRICAL FUEL PUMP, MOUNTING COLLAR.CONSEQUENCES OF DEFECT: LEAKING FUEL MAY ENTER THE TOOL WELL AND/OR DRIP TO THEGROUND AT THE REAR OF THE VEHICLE. THIS WOULD CREATE A RISK OF FIRE, POSSIBLYRESULTING IN VEHICLE DAMAGE AND PERSONAL INJURY.NOTE: DRIVER MAY BE ALERTED TO THE PROBLEM BY A STRONG FUEL ODOR AND A DISTINCTINCREASE IN THE NOISE LEVEL FROM FUEL PUMP OPERATION. |
Data updated January 2023
1980 Averages
| Avg. Car Cost : | $7,210 |
| Avg. Household Income : | $19,170 |
| Avg. Home : | $68,714 |
| Avg. Gallon of Gas : | $1.22 |
| Total Car Production : | 8,009,841 |
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1980 Saab 900?
Q: What is the wheelbase size of the 1980 Saab 900? A: The 1980 Saab 900 has a wheelbase size of 99.40 inches.Q: What is the length of the 1980 Saab 900? A: The 1980 Saab 900 has a length of 187.60 inches.Q: What is the width of the 1980 Saab 900? A: The 1980 Saab 900 has a width of 66.50 inches.Q: How much did the 1980 Saab 900 cost when new?A: The 1980 Saab 900 cost approximately $9,290 to $13,690 (USD) when new.Q: What were the bodystyles of the 1980 Saab 900? A: The 1980 Saab 900 was offered as a 5-Door Hatchback, Hatchback.Q: How many vehicles did Saab produce in 1980? A: Saab produced 65,754 automobiles in 1980.Q: What engines did the 1980 Saab 900 have? A: The 1980 Saab 900 had the following engine options: Inline 4 (1985 cc | 121.1 cu in. | 2.0 L.) with 110 BHP (80.96 KW) @ 5250 RPM and 119 Ft-Lbs (161 NM) @ 3500 RPM Turbocharged Inline 4 (1985 cc | 121.1 cu in. | 2.0 L.) with 135 BHP (99.36 KW) @ 4800 RPM and 160 Ft-Lbs (217 NM) @ 3500 RPM Q: What transmission did the 1980 Saab 900 have? A: The 1980 Saab 900 had a 4 speed Manual gearbox.