conceptcarz.com


1992 Buick Regal Technical Specifications and Dimensions

These are standard specifications - not necessarily specifications for the vehicle(s) in the photo(s).

Features

Engine Location : Front
Drive Type : Front Wheel
Body / Chassis : Unibody
Production Years for Series : 1988 - 1996
Price : $16,610-$19,300
Weight : 3240 lbs | 1469.639 kg

Power

V 6 60-degree
Displacement : 3130 cc | 191.0 cu in. | 3.1 L.
Power : 140 HP (103.04 KW) @ 4400 RPM
Torque :185 Ft-Lbs (251 NM) @ 3200 RPM
Bore : 3.5 in | 89 mm.
Stroke : 3.3 in | 84 mm.
Compression : 8.8:1
Cylinder Block : Cast-iron
Cylinder Head : Aluminum
Multi-port Fuel Injection
V 6 90-degree | With Balance Shaft
Displacement : 3785 cc | 231.0 cu in. | 3.8 L.
Power : 170 HP (125.12 KW) @ 4800 RPM
Torque :220 Ft-Lbs (298 NM) @ 3200 RPM
Bore : 3.8 in | 97 mm.
Stroke : 3.4 in | 86 mm.
Compression : 8.5:1
Construction : Cast-iron block and head
Sequential Tuned Port Fuel Injection
Transmission:
4 Automatic with Overdrive

Production Figures

Total Buick Production for 1992 : 427,915
1992 Buick Regal

Handling

Recall

Component

EXTERIOR LIGHTING

Manufacturer

GENERAL MOTORS CORP.

Mfr Report Date19900801
NHTSA Campaign ID95V152000
SummaryINCORRECT CLEAR FRONT SIDE MARKER BULBS WERE INSTALLED RATHER THAN AMBER BULBS. THIS DOES NOT CONFORM TO THE REQUIREMENTS OF FMVSS NO. 108, 'LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.'
ConsequenceCONSEQUENCE OF NON-COMPLIANCE: DURING ILLUMINATION, THE BULBS WILL SHOW CLEAR RATHER THAN AMBER AND COULD MOMENTARILY CONFUSE OTHER DRIVERS.
RemedyDEALERS WILL REPLACE THE CLEAR BULBS WITH THE CORRECT AMBER BULBS.
NotesSYSTEM: LIGHTING; LAMP; SIDE MARKER LIGHTS; FMVSS NO. 108.VEHICLE DESCRIPTION: PASSENGER VEHICLES.NOTE: OWNERS WHO TAKE THE VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME, SHOULD CONTACT BUICK AT 1-800-521-7300. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393.

Component

POWER TRAIN:AUTOMATIC TRANSMISSION

Manufacturer

GENERAL MOTORS CORP.

Mfr Report Date19911001
NHTSA Campaign ID91V214000
SummaryTHE REVERSE SERVO APPLY PIN MAY BIND IN THE CASE WHICH COULD CAUSE REVERSE BAND DISTRESS (LOSS OR SLIPPING OF REVERSE), REVERSE BAND DRAG IN DRIVE RANGE (POOR PERFORMANCE -- POOR POWER), OR THE TRANSMISSION TO REMAIN IN REVERSE WHILE THE SHIFT INDICATOR SHOWS NEUTRAL GEAR POSITION.
ConsequenceIF THE TRANSMISSION REMAINS IN REVERSE WHILE THE SHIFTINDICATOR SHOWS NEUTRAL, THE VEHICLE MAY UNEXPECTEDLY MOVE REARWARD AND RESULTIN A VEHICLE ACCIDENT.
RemedyREPLACE THE TRANSAXLE WHERE REQUIRED.
NotesSYSTEM: TRANSMISSION AND TRANSMISSION SHIFT INDICATOR.VEHICLE DESCRIPTION: 1992 'A' AND 'W' BODY PASSENGER CARS WITH 4-SPEEDAUTOMATIC TRANSMISSIONS.

Information provided by NHTSA
Data updated January 2021
1992 Averages
Avg. Car Cost : $16,950
Avg. Household Income : $30,030
Avg. Home : $122,500
Avg. Gallon of Gas : $1.05


Concepts by Buick



© 1998-2021. All rights reserved. The material may not be published, broadcast, rewritten, or redistributed.


Vehicle information, history, And specifications from concept to production.
Follow ConceptCarz on Facebook Follow ConceptCarz on Twitter RSS News Feed

Conceptcarz.com
© 1998-2021 Conceptcarz.com Reproduction Or reuse prohibited without written consent.