These are standard specifications for the 1988 Chevrolet Beretta, not necessarily specifications for the vehicle(s) in the photo(s).
Transmission:
5 Manual , Automatic
Information provided by NHTSA
Data updated January 2023
Features
| Engine Location : | Front |
| Drive Type : | Front Wheel |
| Production Years for Series : | 1987 - 1996 |
| Price : | $10,135 |
| Weight : | 2600 lbs | 1179.34 kg |
Engine & Transmission
| Inline 4 | |
|---|---|
| Displacement : | 1983 cc | 121.0 cu in. | 2.0 L. |
| Power : | 90 BHP (66.24 KW) @ 5600 RPM |
| Torque : | 108 Ft-Lbs (146 NM) @ 3200 RPM |
| Bore : | 3.5 in | 89 mm. |
| Stroke : | 3.2 in | 80 mm. |
| Compression : | 9.0:1 |
| Main Bearings : | 5 |
| Cylinder Block : | Cast-iron |
| Cylinder Head : | Aluminum |
| Throttle-body fuel injection | |
| V 6 60-degree | |
|---|---|
| Displacement : | 2835 cc | 173.0 cu in. | 2.8 L. |
| Power : | 130 HP (95.68 KW) @ 4700 RPM |
| Torque : | 160 Ft-Lbs (217 NM) @ 3600 RPM |
| Bore : | 3.5 in | 89 mm. |
| Stroke : | 3.0 in | 76 mm. |
| Compression : | 8.9:1 |
5 Manual , Automatic
Production Figures
| Total Chevrolet Production for 1988 : | 1,236,316 |
| Total 1988 Beretta production : | 169,171 |
| 1988 Chevrolet Beretta | |
Handling
Recall
| Component | FUEL SYSTEM, GASOLINE |
|---|---|
| Manufacturer | HONEYWELL INTERNATIONAL, INC. |
| NHTSA Campaign ID | 06E043000 |
| Summary | CERTAIN REPLACEMENT FUEL FILTERS, FRAM BRAND NAME P/N G3727, WITH DATE CODES X52911 THROUGH X60801 SEQUENTIALLY OR X600141 AND A MEXICO COUNTRY OR ORIGIN MARKING ON THE FUEL FILTER HOUSING MANUFACTURED FROM OCTOBER 18, 2005, THROUGH MARCH 21, 2006, SOLD FOR USE ON THE VEHICLES LISTED ABOVE AND ON CERTAIN SCHOOL BUSES. (TO SEE THE SCHOOL BUS ENGINE SIZES, CLICK ON 'DOCUMENT SEARCH' AND THEN 'BUS APPLICATIONS'). THE CONNECTOR ON THE FUEL FILTER WAS NOT MANUFACTURED TO HONEYWELL'S SPECIFICATION. AS A RESULT, THE O-RING MAY NOT SEAT CORRECTLY ON THE FUEL LINE. |
| Consequence | THIS CONDITION MAY CAUSE AN INADEQUATE SEAL AT THE CONNECTION, POTENTIALLY LEADING TO A FUEL LEAK. IN THE PRESENCE OF AN IGNITION SOURCE, A FIRE COULD OCCUR. |
| Remedy | HONEYWELL WILL NOTIFY OWNERS AND REPLACE THE FUEL FILTERS FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 18, 2006. OWNERS MAY CONTACT FRAM CUSTOMER SERVICE AT 1-800-890-2075 (OPTION 1). |
| Notes | THIS RECALL ONLY PERTAINS TO AFTERMARKET FRAM FUEL FILTERS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON THE VEHICLES LISTED.CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO SAFERCAR.GOV. |
| Component | STRUCTURE:BODY:HOOD |
|---|---|
| Manufacturer | GENERAL MOTORS CORP. |
| Mfr Report Date | 19860601 |
| NHTSA Campaign ID | 91V135000 |
| Summary | SECONDARY HOOD LATCH ASSEMBLY ON THESE VEHICLES MAY NOT BE PROPERLY ADJUSTED AND COULD BECOME BENT. THIS WILL LEAD TO A CONDITION WHERE FULL PRIMARY LATCH ENGAGEMENT IS NOT ATTAINED. |
| Consequence | A BENT SECONDARY HOOD LATCH COULD LEAD TO THE PRIMARYLATCH NOT BEING FULLY ENGAGED, ALLOWING THE HOOD TO UNEXPECTEDLY OPEN. IF THISWERE TO OCCUR WHILE THE VEHICLE WAS IN MOTION, THE HOOD MAY CONTACT THEWINDSHIELD, REDUCING THE FORWARD VISION AREA OF THE DRIVER AND A VEHICLE CRASHCOULD OCCUR WITHOUT PRIOR WARNING. |
| Remedy | REPLACE THE PRIMARY HOOD LATCH ASSEMBLY, THE SECONDARY HOOD LATCH ASSEMBLY, AND THE SUPPORT BRACKET. |
| Notes | SYSTEM: HOOD.VEHICLE DESCRIPTION: PASSENGER VEHICLES. |
| Component | STRUCTURE:BODY:DOOR:HINGE AND ATTACHMENTS |
|---|---|
| Manufacturer | GENERAL MOTORS CORP. |
| Mfr Report Date | 19861001 |
| NHTSA Campaign ID | 89V225000 |
| Summary | A DOOR HINGE (UPPER OR LOWER) MAY BREAK WHILE OPENING OR CLOSING THE DOOR MAKING IT DIFFICULT TO REPOSITION AND CLOSE PROPERLY. |
| Consequence | HINGE SEPARATION MAY REDUCE THE STRUCTURAL INTEGRITY OFTHE SIDE OF THE CAR AND INCREASE RISK OF INJURY IN CERTAIN TYPES OF ACCIDENTS. |
| Remedy | REPLACE DOOR HINGES ON BOTH DOORS. |
| Notes | SYSTEM: DOOR HINGES.VEHICLE DESCRIPTION: PASSENGER CARS. |
| Component | LATCHES/LOCKS/LINKAGES:HOOD:LATCH |
|---|---|
| Manufacturer | GENERAL MOTORS CORP. |
| Mfr Report Date | 19861101 |
| NHTSA Campaign ID | 88V039000 |
| Summary | SECONDARY HOOD LATCH ASSEMBLY MAY NOT HAVE BEEN PROPERLY ADJUSTED RESULTING IN LATCH BECOMING BENT. |
| Consequence | A BENT SECONDARY HOOD LATCH COULD CAUSE THE PRIMARYLATCH TO MALFUNCTION. IF THIS OCCURED THE HOOD COULD UNEXPECTEDLY OPEN. IFTHIS HAPPENED WHILE VEHICLE IS IN MOTION REDUCTION OF FORWARD VISIBILITY COULDCAUSE A VEHICLE CRASH WITHOUT PRIOR WARNING. |
| Remedy | INSPECT AND REPLACE SECONDARY HOOD LATCH ASSEMBLIES AS REQUIRED. |
| Notes | SYSTEM: HOOD LATCH/SECONDARY.VEHICLE DESCRIPTION: PASSENGER CARS. |
| Component | SEAT BELTS |
|---|---|
| Manufacturer | GENERAL MOTORS CORP. |
| Mfr Report Date | 19880101 |
| NHTSA Campaign ID | 91V206000 |
| Summary | THE FRONT SHOULDER BELT RETRACTORS MAY HAVE REDUCED SENSITIVITY OF THE LOCK-UP FEATURE AND WOULD NOT FUNCTION IN A SUDDEN DECELERATION OR CRASH. |
| Consequence | FAILURE OF THE SHOULDER BELT RETRACTOR WOULD RESULT INTHE SEAT OCCUPANT ONLY BEING RESTRAINED BY THE LAP BELT IN A CRASH OR SUDDENSTOP, AND AN INCREASED POSSIBILITY OF INJURY. |
| Notes | SYSTEM: SAFETY BELTS (PASSIVE RESTRAINT).VEHICLE DESCRIPTION: PASSENGER CARS EQUIPPED WITH DOOR MOUNTED SHOULDER AND LAPSAFETY BELT SYSTEMS.CORECTIVE ACTION: REPLACE THE FRONT SHOULDER BELT RETRACTORS AND ASSEMBLIES. |
Data updated January 2023
1988 Averages
| Avg. Car Cost : | $10,400 |
| Avg. Household Income : | $27,225 |
| Avg. Home : | $91,600 |
| Avg. Gallon of Gas : | $0.91 |
| Avg. Stamp : | $0 |
1988 Chevrolet Beretta FAQs (show)
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1988 Chevrolet Beretta?
Q: What is the wheelbase size of the 1988 Chevrolet Beretta? A: The 1988 Chevrolet Beretta has a wheelbase size of 103.40 inches.Q: What is the length of the 1988 Chevrolet Beretta? A: The 1988 Chevrolet Beretta has a length of 187.20 inches.Q: What is the width of the 1988 Chevrolet Beretta? A: The 1988 Chevrolet Beretta has a width of 68.00 inches.Q: How much did the 1988 Chevrolet Beretta cost when new?A: The 1988 Chevrolet Beretta had a base price of approximately $10,135 (USD).Q: What is the bodystyle of the 1988 Chevrolet Beretta? A: The 1988 Chevrolet Beretta was a Coupe.Q: How many vehicles did Chevrolet produce in 1988? A: Chevrolet produced 1,236,316 automobiles in 1988.Q: How many 1988 Berettas were produced? A: Chevrolet produced 169,171 examples of the Beretta in 1988.Q: What engines did the 1988 Chevrolet Beretta have? A: The 1988 Chevrolet Beretta had the following engine options: Inline 4 (1983 cc | 121.0 cu in. | 2.0 L.) with 90 BHP (66.24 KW) @ 5600 RPM and 108 Ft-Lbs (146 NM) @ 3200 RPM V 6 (2835 cc | 173.0 cu in. | 2.8 L.) with 130 HP (95.68 KW) @ 4700 RPM and 160 Ft-Lbs (217 NM) @ 3600 RPM Q: What transmissions did the 1988 Chevrolet Beretta have? A: The 1988 Chevrolet Beretta had the following gearbox options: 5 speed Manual, Automatic.
What are the dimension and mechanical specifications of the 1988 Chevrolet Beretta?
How many 1988 Chevrolet Beretta were produced?
How powerful was the 1988 Chevrolet Beretta? Was the 1988 Chevrolet Beretta popular? Was the 1988 Chevrolet Beretta expensive? What was the fuel economy of the 1988 Chevrolet Beretta?
Q: What is the wheelbase size of the 1988 Chevrolet Beretta? A: The 1988 Chevrolet Beretta has a wheelbase size of 103.40 inches.Q: What is the length of the 1988 Chevrolet Beretta? A: The 1988 Chevrolet Beretta has a length of 187.20 inches.Q: What is the width of the 1988 Chevrolet Beretta? A: The 1988 Chevrolet Beretta has a width of 68.00 inches.Q: How much did the 1988 Chevrolet Beretta cost when new?A: The 1988 Chevrolet Beretta had a base price of approximately $10,135 (USD).Q: What is the bodystyle of the 1988 Chevrolet Beretta? A: The 1988 Chevrolet Beretta was a Coupe.Q: How many vehicles did Chevrolet produce in 1988? A: Chevrolet produced 1,236,316 automobiles in 1988.Q: How many 1988 Berettas were produced? A: Chevrolet produced 169,171 examples of the Beretta in 1988.Q: What engines did the 1988 Chevrolet Beretta have? A: The 1988 Chevrolet Beretta had the following engine options: Inline 4 (1983 cc | 121.0 cu in. | 2.0 L.) with 90 BHP (66.24 KW) @ 5600 RPM and 108 Ft-Lbs (146 NM) @ 3200 RPMSimilarly Sized Vehicles
from 1988
Chevrolet Monthly Sales Volume
March 2023
398,141