conceptcarz.com

1967 Chevrolet El Camino Specifications

These are standard specifications for the 1967 Chevrolet El Camino, not necessarily specifications for the vehicle(s) in the photo(s).
Engine Location : Front
Drive Type : Rear Wheel
Production Years for Series : 1964 - 1967
Price : $2,615-$2,695
Weight : 3200 lbs | 1451.496 kg
V 8
Displacement : 4638 cc | 283.0 cu in. | 4.6 L.
Power : 175 BHP (128.8 KW) @ 4400 RPM
Torque :275 Ft-Lbs (373 NM) @ 2400 RPM
Bore : 3.9 in | 98 mm.
Stroke : 3.0 in | 76 mm.
Main Bearings : 5
Cylinder Block : Cast-iron
V 8
Displacement : 4638 cc | 283.0 cu in. | 4.6 L.
Power : 220 HP (161.92 KW) @ 4800 RPM
Torque :295 Ft-Lbs (400 NM) @ 3200 RPM
Bore : 3.9 in | 99 mm.
Stroke : 3.0 in | 76 mm.
Compression : 9.25:1
Main Bearings : 5
Construction : Cast-iron block and head
1 4-barrel carburetor
V 8
Displacement : 6489 cc | 396.0 cu in. | 6.5 L.
Power : 350 BHP (257.6 KW) @ 5200 RPM
Torque :415 Ft-Lbs (563 NM) @ 3400 RPM
Bore : 4.1 in | 104 mm.
Stroke : 3.8 in | 96 mm.
Main Bearings : 5
Valvetrain : 16 OHV (2 valves per cylinder)
Cylinder Block : Cast-iron
Transmission:
3 Manual Synchromesh; column-mounted gear shift lever , Automatic Turbo Hydra-Matic

Total Chevrolet Production for 1967 : 2,206,639
Total 1967 El Camino production : 34,830
1967 Chevrolet El Camino

Pickup

Exterior
Length : 197.0 in | 5004 mm.
Wheelbase : 115.0 in | 2921 mm.
Front Track : 58.0 in | 1473 mm.
Rear Track : 58.0 in | 1473 mm.

Custom Pickup

Price : $2,695
Weight : 3210 lbs | 1456.032 kg
Exterior
Length : 197.0 in | 5004 mm.
Wheelbase : 115.0 in | 2921 mm.
Front Track : 58.0 in | 1473 mm.
Rear Track : 58.0 in | 1473 mm.

Suspension
Rear : Semi-floating axle

Tires / Wheels
Tires : 7.35 x 14

Component

STEERING: STEERING WHEEL/HANDLE BAR

Manufacturer

GENERAL MOTORS CORP.

NHTSA Campaign ID66V032001
NotesPOSSIBILITY THAT STEERING SHAFT MAY HAVE BEEN IMPROPERLY INSTALLED.THIS COULD CAUSE A BINDING CONDITION WHICH, EVEN THOUGH NOT NOTICABLE TO THE OWNER ,MIGHT SUBJECT THE SHAFT TO ABNORMAL STRESSES UNDER CERTAIN CONDITIONS.SHOULD THESE STRESSES BE SEVERE ENOUGH OR EXTEND OVER A SUFFICIENT PERIOD OF TIME, THE STEERING SHAFT COULD BREAK WITH RESULTANT LOSS OF STEERING.(REPLACE ALL SHAFTS WITH IMPROVED DESIGN.)

Information provided by NHTSA
Data updated January 2023
1967 Averages
Avg. Car Cost : $2,750
Avg. Household Income : $7,300
Avg. Home : $14,250
Avg. Gallon of Gas : $0.33

Popular frequently asked questions include:

What are the dimension and mechanical specifications of the 1967 Chevrolet El Camino?
How many 1967 Chevrolet El Camino were produced?
How powerful was the 1967 Chevrolet El Camino? Was the 1967 Chevrolet El Camino popular? Was the 1967 Chevrolet El Camino expensive? What was the fuel economy of the 1967 Chevrolet El Camino?

Q: What is the wheelbase size of the 1967 Chevrolet El Camino? A: The 1967 Chevrolet El Camino has a wheelbase size of 115.00 inches.

Q: What is the length of the 1967 Chevrolet El Camino? A: The 1967 Chevrolet El Camino has a length of 197.00 inches.

Q: How much did the 1967 Chevrolet El Camino cost when new?A: The 1967 Chevrolet El Camino cost approximately $2,615 to $2,695 (USD) when new.

Q: What were the bodystyles of the 1967 Chevrolet El Camino? A: The 1967 Chevrolet El Camino was offered as a Custom Pickup, Pickup.

Q: What tires did the 1967 Chevrolet El Camino have? A: The 1967 Chevrolet El Camino had 7.35 x 14 tires.

Q: How many vehicles did Chevrolet produce in 1967? A: Chevrolet produced 2,206,639 automobiles in 1967.

Q: How many 1967 El Caminos were produced? A: Chevrolet produced 34,830 examples of the El Camino in 1967.

Q: What engines did the 1967 Chevrolet El Camino have? A: The 1967 Chevrolet El Camino had the following engine options: V 8 (4638 cc | 283.0 cu in. | 4.6 L.) with 175 BHP (128.8 KW) @ 4400 RPM and 275 Ft-Lbs (373 NM) @ 2400 RPM
  • V 8 (4638 cc | 283.0 cu in. | 4.6 L.) with 220 HP (161.92 KW) @ 4800 RPM and 295 Ft-Lbs (400 NM) @ 3200 RPM
  • V 8 (6489 cc | 396.0 cu in. | 6.5 L.) with 350 BHP (257.6 KW) @ 5200 RPM and 415 Ft-Lbs (563 NM) @ 3400 RPM
  • Q: What transmissions did the 1967 Chevrolet El Camino have? A: The 1967 Chevrolet El Camino had the following gearbox options: 3 speed Manual Synchromesh; column-mounted gear shift lever, Automatic Turbo Hydra-Matic.