conceptcarz.com

1979 Porsche 928 Specifications

These are standard specifications for the 1979 Porsche 928, not necessarily specifications for the vehicle(s) in the photo(s).
Engine Location : Front
Drive Type : Rear Wheel
Body / Chassis : Steel Monocoque
Production Years for Series : 1977 - 1995
Price : $28,500
Weight : 3145 lbs | 1426.548 kg
0-60 mph : 8.3 seconds.
Top Speed : 138 mph | 222.042 km/h
V 8 90-degree | Vee-Type
Displacement : 4474 cc | 273.0 cu in. | 4.5 L.
Power : 219.00 SAE @ 5250 RPM
Torque :254 Ft-Lbs (344 NM) @ 3600 RPM
Bore : 3.7 in | 95 mm.
Stroke : 3.1 in | 79 mm.
Compression : 8.5:1
Construction : Aluminum block and head
Ignition system :Bosch K-Jetronic fuel inject
Transmission:
5 Manual Transaxle , 3 Automatic

Total Porsche Production for 1979 : 36,011
Total 1979 928 production : 1,535
1979 Porsche 928
Component

STEERING: STEERING WHEEL/HANDLE BAR

Manufacturer

PORSCHE CARS N.A. INC.

Mfr Report Date19771201
NHTSA Campaign ID82V048000
SummaryON THE INVOLVED VEHICLES, THE UNIVERSAL JOINT WHICH CONNECTS THE STEERING SHAFT TO THE STEERING RACK MAY HAVE BEEN IMPROPERLY POSITIONED DURING ASSEMBLY. IF VEHICLE IS DRIVEN ON POOR ROADS FOR AN EXTENDED PERIOD OF TIME, THE CONNECTION BETWEEN THE STEERING SHAFT AND UNIVERSAL JOINT COULD LOOSEN AND CAUSE EXCESSIVE STEERING WHEEL FREE PLAY.
RemedyDEALER WILL INSPECT AND REPOSITION THE UNIVERSAL JOINT CONNECTION AT NO COST TO OWNER.
NotesVEHICLE DESCRIPTION: PASSENGER VEHICLES.SYSTEM: STEERING; UNIVERSAL JOINT.CONSEQUENCES OF DEFECT: THIS CONDITION COULD RESULT IN LOSS OF VEHICLE CONTROLAND AN ACCIDENT.

Component

SERVICE BRAKES, HYDRAULIC:FLUID

Manufacturer

PORSCHE CARS N.A. INC.

Mfr Report Date19781201
NHTSA Campaign ID79V015000
SummaryTHE BRAKE SYSTEM RESERVOIR ON THE INVOLVED VEHICES MAY CONTAIN CONTAMINATED BRAKE FLUID. THIS FLUID COULD EVENTUALLY SPREAD THROUGH THE COMPLETE BRAKE SYSTEM AND DAMAGE BRAKE COMPONENTS.
RemedyTHE DEALER WILL INSPECT AND CORRECT ALL BRAKE COMPONENTS AT NO COST TO OWNER.
NotesVEHICLE DESCRIPTION: PASSENGER VEHICLES.SYSTEM: SERVICE BRAKES; BRAKE FLUID.CONSEQUENCES OF DEFECT: BRAKING CAPABILITIES WILL BE LOST, WHICH CAN RESULT INLOSS OF VEHICLE CONTROL AND AN ACCIDENT.

Component

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER

Manufacturer

PORSCHE CARS N.A. INC.

Mfr Report Date19790401
NHTSA Campaign ID79V129000
SummaryTHE TWO MOUNTING BOLTS FOR EACH OF THE LEFT AND RIGHT SIDE FRONT CALIPERS HAVE BEEN IMPROPERLY TORQUED DURING ASSEMBLY. THE TORQUE WRENCH USED IN THE ASSEMBLY MAY HAVE BEEN MECHANICALLY DEFECTIVE.
RemedyDEALER WILL RETORQUE THE FRONT BRAKE CALIPER MOUNTING BOLTS TO PROPER SPECIFICATIONS.
NotesVEHICLE DESCRIPTION: PASSENGER VEHICLES.SYSTEM: SERVICE BRAKES; HYDRAULIC DISC CALIPER.CONSEQUENCES OF DEFECT: THIS CONDITION COULD CAUSE DEGRATION OF THE BRAKINGSYSTEM, WHICH COULD HAVE AN ADVERSE EFFECT ON HANDLING. THIS COULD CAUSE LOSSOF VEHICLE CONTROL AND AN ACCIDENT.

Information provided by NHTSA
Data updated January 2023
1979 Averages
Avg. Household Income : $17,500
Avg. Home : $58,100
Avg. Gallon of Gas : $0.86

Popular frequently asked questions include:

What are the dimension and mechanical specifications of the 1979 Porsche 928?
How many 1979 Porsche 928 were produced?
How powerful was the 1979 Porsche 928? Was the 1979 Porsche 928 popular? Was the 1979 Porsche 928 expensive? What was the fuel economy of the 1979 Porsche 928?

Q: How fast is the 1979 Porsche 928? A: The 1979 Porsche 928 has a top speed of 138 mph.

Q: What is the wheelbase size of the 1979 Porsche 928? A: The 1979 Porsche 928 has a wheelbase size of 98.30 inches.

Q: What is the length of the 1979 Porsche 928? A: The 1979 Porsche 928 has a length of 175.70 inches.

Q: How much did the 1979 Porsche 928 cost when new?A: The 1979 Porsche 928 had a base price of approximately $28,500 (USD).

Q: What is the bodystyle of the 1979 Porsche 928? A: The 1979 Porsche 928 was a Coupe.

Q: How many vehicles did Porsche produce in 1979? A: Porsche produced 36,011 automobiles in 1979.

Q: How many 1979 928s were produced? A: Porsche produced 1,535 examples of the 928 in 1979.

Q: What engine did the 1979 Porsche 928 have? A: The engine powering the 1979 Porsche 928 was a V 8Vee-Type (4474 cc | 273.0 cu in. | 4.5 L.) with 219.00 SAE @ 5250 RPM and 254 Ft-Lbs (344 NM) @ 3600 RPM.

Q: What transmissions did the 1979 Porsche 928 have? A: The 1979 Porsche 928 had the following gearbox options: 5 speed Manual Transaxle, 3 speed Automatic.