conceptcarz.com

2018 Chrysler 300 Specifications

These are standard specifications for the 2018 Chrysler 300, not necessarily specifications for the vehicle(s) in the photo(s).
Engine Location : Front
Drive Type : Rear Wheel (standard), AWD
Body / Chassis : Unitized steel
Production Years for Series : 2011 -
Weight : 4013 lbs | 1820.266 kg
MPG City : 19
MPG Highway : 30
Combined MPG : 23.00
Introduced At : 2011 Detroit Auto Show
Coefficient of Drag : 0.320
V 6
Displacement : 3604 cc | 219.9 cu in. | 3.6 L.
Power : 292 BHP (214.912 KW) @ 6350 RPM
Torque :260 Ft-Lbs (353 NM) @ 4800 RPM
Bore : 3.8 in | 96 mm.
Stroke : 3.3 in | 83 mm.
Compression : 10.2:1
Valvetrain : 24 DOHC (4 valves per cylinder)
Cylinder Block : Aluminum
Cylinder Head : Aluminum Alloy
Sequential Multiport Fuel Injection
Redline : 6400 RPM
Transmission:
8 Automatic 845RE Torqueflite

1st Gear : 4.71
2nd Gear : 3.14
3rd Gear : 2.10
4th Gear : 1.67
5th Gear : 1.29
6th Gear : 1.00
7th Gear : 0.84
8th Gear : 0.67
Component

ELECTRICAL SYSTEM:SOFTWARE

Manufacturer

Chrysler (FCA US LLC)

Mfr Report Date20130506
NHTSA Campaign ID18V332000
SummaryChrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.
ConsequenceIf the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
RemedyChrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
NotesOwners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Component

ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD

Manufacturer

Chrysler (FCA US LLC)

Mfr Report Date20170825
NHTSA Campaign ID18V524000
SummaryChrysler (FCA US LLC) is recalling certain 2018 Jeep Renegade, Compass and Grand Cherokee, RAM 1500 and Promaster, Fiat 500x, Dodge Journey, Challenger, Charger and Durango and Chrysler 300x vehicles, 2017-2018 Jeep Wrangler, Dodge Grand Caravan and Chrysler Town and Country vehicles and 2018-2019 Jeep Cherokee and 2018 Chrysler Pacifica and Pacifica Hybrid vehicles. The powertrain control module may be equipped with a voltage regulator chip in the circuit board that may fail, causing a stall or a no start condition.
ConsequenceA vehicle stall can increase the risk of a crash.
RemedyChrysler will notify owners, and dealers will replace the powertrain control module, free of charge. The recall began October 2, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U87.
NotesOwners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Component

POWER TRAIN:AUTOMATIC TRANSMISSION

Manufacturer

Chrysler (FCA US LLC)

Mfr Report Date20180210
NHTSA Campaign ID18V280000
SummaryChrysler (FCA US LLC) is recalling certain 2018 Dodge Charger, Durango and Challenger, Jeep Grand Cherokee and Wrangler, Chrysler 300, and RAM 1500 vehicles. An incorrect transmission park lock rod may have been installed in the transmission.
ConsequenceIf the incorrect park lock rod is installed, the transmission may not shift into 'PARK' and keep the vehicle from moving, increasing the risk of unintended vehicle movement and the risk of a crash.
RemedyChrysler will notify owners, and dealers will install the correct park lock rod, free of charge. The recall began June 28, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U43.
NotesOwners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Information provided by NHTSA
Data updated January 2023

Popular frequently asked questions include:

What are the dimension and mechanical specifications of the 2018 Chrysler 300?
How many 2018 Chrysler 300 were produced?
How powerful was the 2018 Chrysler 300? Was the 2018 Chrysler 300 popular? Was the 2018 Chrysler 300 expensive? What was the fuel economy of the 2018 Chrysler 300?

Q: What is the wheelbase size of the 2018 Chrysler 300? A: The 2018 Chrysler 300 has a wheelbase size of 120.20 inches.

Q: What is the length of the 2018 Chrysler 300? A: The 2018 Chrysler 300 has a length of 198.60 inches.

Q: What is the width of the 2018 Chrysler 300? A: The 2018 Chrysler 300 has a width of 75.00 inches.

Q: How much headroom does the 2018 Chrysler 300 have?A: The 2018 Chrysler 300 has 38.60 inches of headroom.

Q: How much legroom does the 2018 Chrysler 300 have?A: The 2018 Chrysler 300 has legroom of 41.80 inches.

Q: What is the 2018 Chrysler 300's towing capacity?A: The 2018 Chrysler 300 has a towing capaicty of 1000.00 lbs.

Q: What is the bodystyle of the 2018 Chrysler 300? A: The 2018 Chrysler 300 was a Sedan.

Q: What engine did the 2018 Chrysler 300 have? A: The engine powering the 2018 Chrysler 300 was a V 6 (3604 cc | 219.9 cu in. | 3.6 L.) with 292 BHP (214.912 KW) @ 6350 RPM and 260 Ft-Lbs (353 NM) @ 4800 RPM.

Q: What transmission did the 2018 Chrysler 300 have? A: The 2018 Chrysler 300 had a 8 speed Automatic 845RE Torqueflite gearbox.