2020 Chrysler 300 Specifications

These are standard specifications for the 2020 Chrysler 300, not necessarily specifications for the vehicle(s) in the photo(s).
Engine Location : Front
Drive Type : Rear Wheel (standard), AWD
Body / Chassis : Unitized steel
Production Years for Series : 2011 -
Weight : 4013 lbs | 1820.266 kg
MPG City : 19
MPG Highway : 30
Combined MPG : 23.00
Introduced At : 2011 Detroit Auto Show
Coefficient of Drag : 0.320
V 6 60-degree | Vee-Type
Displacement : 3604 cc | 219.9 cu in. | 3.6 L.
Power : 292 BHP (214.912 KW) @ 6350 RPM
Torque :260 Ft-Lbs (353 NM) @ 4800 RPM
Bore : 3.8 in | 96 mm.
Stroke : 3.3 in | 83 mm.
Compression : 10.2:1
Valvetrain : 24 DOHC (4 valves per cylinder)
Cylinder Block : Aluminum
Cylinder Head : Aluminum Alloy
V 8 90-degree | Vee-Type
Displacement : 5654 cc | 345.0 cu in. | 5.7 L.
Power : 363 HP (267.168 KW) @ 5200 RPM
Torque :394 Ft-Lbs (534 NM) @ 4200 RPM
Bore : 3.9 in | 100 mm.
Stroke : 3.6 in | 91 mm.
Compression : 10.5:1
Valvetrain : 16 OHV (2 valves per cylinder)
Cylinder Block : Cast-iron
Cylinder Head : Aluminum Alloy
Sequential Multiport Fuel Injection
Redline : 5800 RPM
Transmission:
8 Automatic 845RE Torqueflite

1st Gear : 4.71
2nd Gear : 3.14
3rd Gear : 2.10
4th Gear : 1.67
5th Gear : 1.29
6th Gear : 1.00
7th Gear : 0.84
8th Gear : 0.67
Total Chrysler Production for 2020 : 110,464
2020 Chrysler 300

Sedan

Cargo Volume : 16 cu. ft.
Interior Volume : 106.3 cu. ft.
Towing Capacity : 1,000.0 lbs
Fuel Capacity : 18.5 Gal
Seating Capacity : 5
Doors : 4
Exterior
Length : 198.6 in | 5044 mm.
Width : 75.0 in | 1905 mm.
Height : 58.5 in | 1486 mm.
Wheelbase : 120.2 in | 3053 mm.
Front Track : 63.4 in | 1610 mm.
Rear Track : 63.8 in | 1621 mm.
Ground Clearance : 4.7 in | 119 mm.
Interior
Front Headroom : 38.6 in | 980 mm.
Rear Headroom : 37.9 in | 963 mm.
Front Legroom : 41.8 in | 1062 mm.
Rear Legroom : 40.1 in | 1019 mm.
Front Hip Room : 56.2 in | 1428 mm.
Rear Hip Room : 56.1 in | 1425 mm.
Front Shoulder Room : 59.5 in | 1511 mm.
Rear Shoulder Room : 57.7 in | 1466 mm.

Suspension
Front : Independent SLA with high upper 'A' arm, coil spring over gascharged- monotube shock absorbers and stabilizer bar. Lateral and diagonal lower links with dual ball joint knuckles

Rear : Five-link independent with coil springs, gas-charged monotube shock absorbers, stabilizer bar and isolated suspension cradle

Steering
Rack and Pinion, Hydraulically-Assisted
Steering Overall Ratio : 15.5:1
Turns lock to lock : 2.80

Brakes
Front Brakes : Vented disc; single-piston sliding with aluminum housing
Rear Brakes : Solid disc; single-piston sliding with aluminum housing
Front Brake Size : 12.6 in | 320 mm.
Rear Brake Size : 12.6 in | 320 mm.

Tires / Wheels
Tires : P215/65R17 Low-­rolling Resistance
Wheels : 17-­in. premium painted aluminum

Component

AIR BAGS:SIDE/WINDOW:CURTAIN:INFLATOR

Manufacturer

Chrysler (FCA US, LLC) (Stellantis)

NHTSA Campaign ID24V198000
SummaryChrysler (FCA US, LLC) (Stellantis) is recalling certain 2018-2021 Dodge Charger and Chrysler 300 vehicles. The right and left side curtain air bag inflators may rupture due to a manufacturing defect.
ConsequenceAn inflator rupture may result in sharp metal fragments striking occupants, resulting in injury or death.
RemedyDealers will replace both side curtain air bags, free of charge. Interim notification letters, notifying owners of the safety risk, were mailed April 19, 2024. A second notice will be sent once the final remedy is available. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 19B.
NotesOwners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

Component

VISIBILITY:WINDSHIELD:CRITICAL FASTENERS

Manufacturer

Chrysler (FCA US, LLC)

NHTSA Campaign ID21V516000
SummaryChrysler (FCA US, LLC) is recalling certain 2020-2021 Dodge Challenger, Dodge Charger, and Chrysler 300 vehicles. During manufacturing, the windshield may not have been properly bonded to the vehicle, allowing it to detach in a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 212, 'Windshield Mounting.'
ConsequenceA windshield that separates from the vehicle during a crash can increase the risk of injury.
RemedyDealers will remove and replace the front windshield urethane sealant, free of charge. Owner notification letters were mailed on August 31, 2021. Owners may contact FCA US LLC customer service at 1-800-853-1403. FCA US LLC's number for this recall is Y47.
NotesOwners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

Information provided by NHTSA
Data updated June 2024

Popular frequently asked questions include:

What are the dimension and mechanical specifications of the 2020 Chrysler 300?
How many 2020 Chrysler 300 were produced?
How powerful was the 2020 Chrysler 300? Was the 2020 Chrysler 300 popular? Was the 2020 Chrysler 300 expensive? What was the fuel economy of the 2020 Chrysler 300?

Q: What is the wheelbase size of the 2020 Chrysler 300? A: The 2020 Chrysler 300 has a wheelbase size of 120.20 inches.

Q: What is the length of the 2020 Chrysler 300? A: The 2020 Chrysler 300 has a length of 198.60 inches.

Q: What is the width of the 2020 Chrysler 300? A: The 2020 Chrysler 300 has a width of 75.00 inches.

Q: How much headroom does the 2020 Chrysler 300 have?A: The 2020 Chrysler 300 has 38.60 inches of headroom.

Q: How much legroom does the 2020 Chrysler 300 have?A: The 2020 Chrysler 300 has legroom of 41.80 inches.

Q: What is the 2020 Chrysler 300's towing capacity?A: The 2020 Chrysler 300 has a towing capaicty of 1000.00 lbs.

Q: What is the bodystyle of the 2020 Chrysler 300? A: The 2020 Chrysler 300 was a Sedan.

Q: What tires did the 2020 Chrysler 300 have? A: The 2020 Chrysler 300 had P215/65R17 Low-­rolling Resistance tires.

Q: What type of wheels did the 2020 Chrysler 300 have? A: The 2020 Chrysler 300 had 17-­in. premium painted aluminum wheels.

Q: How many vehicles did Chrysler produce in 2020? A: Chrysler produced 110,464 automobiles in 2020.

Q: What engines did the 2020 Chrysler 300 have? A: The 2020 Chrysler 300 had the following engine options: V 6Vee-Type (3604 cc | 219.9 cu in. | 3.6 L.) with 292 BHP (214.912 KW) @ 6350 RPM and 260 Ft-Lbs (353 NM) @ 4800 RPM
  • V 8Vee-Type (5654 cc | 345.0 cu in. | 5.7 L.) with 363 HP (267.168 KW) @ 5200 RPM and 394 Ft-Lbs (534 NM) @ 4200 RPM
  • Q: What transmission did the 2020 Chrysler 300 have? A: The 2020 Chrysler 300 had a 8 speed Automatic 845RE Torqueflite gearbox.

    Vehicle information, history, and specifications from concept to production.