1993 Chevrolet Cavalier Technical Specifications and Dimensions

These are standard specifications - not necessarily specifications for the vehicle(s) in the photo(s).

Features

Engine Location : Front
Drive Type : Front Wheel
Production Years for Series : 1988 - 1994
Price : $8,600-$18,300
Weight : 2700 lbs | 1224.699 kg

Power

Inline 4
Displacement : 2179 cc | 133.0 cu in. | 2.2 L.
Power : 110 BHP (80.96 KW) @ 5200 RPM
Torque :130 Ft-Lbs (176 NM) @ 3200 RPM
Bore : 3.5 in | 89 mm.
Stroke : 3.5 in | 88 mm.
Compression : 9.00:1
Valvetrain : 8 OHV (2 valves per cylinder)
Cylinder Block : Cast-iron
Cylinder Head : Aluminum
Port fuel injection
V 6
Displacement : 3130 cc | 191.0 cu in. | 3.1 L.
Power : 140 BHP (103.04 KW) @ 4200 RPM
Torque :185 Ft-Lbs (251 NM) @ 3200 RPM
Bore : 3.5 in | 89 mm.
Stroke : 3.3 in | 84 mm.
Compression : 8.9:1
Valvetrain : 12 OHV (2 valves per cylinder)
Construction : Cast-iron block and head
Port fuel injection
Transmission:
3 Automatic

Production Figures

Total Chevrolet Production for 1993 : 692,116
Total 1993 Cavalier production : 251,590
1993 Chevrolet Cavalier
Coupes : 127,229
RS Convertibles : 8,609
RS Coupes : 127,229
RS Sedans : 96,545
RS Station Wagons : 19,207
Sedans : 96,545
Station Wagons : 19,207
Z24 Convertibles : 8,609
Z24 Coupes : 127,229

Handling

Recall

Component

COMMUNICATIONS:HORN ASSEMBLY

Manufacturer

GENERAL MOTORS CORP.

Mfr Report Date19930401
NHTSA Campaign ID96I001000
SummaryTHIS IS NOT A SAFETY RECALL IN ACCORDANCE WITH FEDERAL REGULATION 573. HOWEVER, IT IS DEEMED A SAFETY IMPROVEMENT CAMPAIGN BY THE AGENCY. THESE VEHICLES WERE BUILT WITH INSUFFICIENT RETENTION OF THE HORN PAD.
ConsequenceTHE HORN PAD CAN SEPARATE FROM THE STEERING WHEEL FALLING BETWEEN THE STEERING WHEEL SPOKES. THE HORN PAD COULD BECOME JAMMED BETWEEN THE STEERING WHEEL SPOKES AND THE TURN SIGNAL LEVER, RESULTING IN DAMAGE TO THE TURN SIGNAL LEVER, HORN PAD, AND HORN WIRING.
RemedyDEALERS WILL MODIFY THE HORN PAD RETENTION CLIPS, INSTALL HORN PAD RETENTION BRACKETS TO THE STEERING WHEEL, REINSTALL THE HORN PAD AND ASSURE THAT THE HORN PAD IS PROPERLY RETAINED.
NotesNOTE:GENERAL MOTORS HAS DECIDED TO CONDUCT A SAFETY IMPROVEMENT CAMPAIGN TO MODIFY THE HORN PAD ON THESE VEHICLES.OWNERS CAN CONTACT CHEVROLET AT 1-800-222-1020.

Component

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS

Manufacturer

GENERAL MOTORS CORP.

Mfr Report Date19930401
NHTSA Campaign ID93V121000
SummaryTHE BRAKE HOSES WERE MANUFACTURED INCORRECTLY, AND DO NOT COMPLY WITH FMVSS 106, 'BRAKE HOSES.'
ConsequenceTHE IMPROPERLY MANUFACTURED BRAKE HOSES CAN CAUSEREDUCED BRAKE EFFECTIVENESS AND/OR UNEVEN BRAKING, WHICH COULD RESULT IN ANACCIDENT.
RemedyREPLACE THE RIGHT FRONT BRAKE HOSE ASSEMBLY ON CIERA AND CENTURY MODELS, AND BOTH REAR BRAKE HOSES ON CAVALIER AND SUNBIRD MODELS.
NotesSYSTEM: BRAKES; HYDRAULIC; HOSE.VEHICLE DESCRIPTION: PASSENGER VEHICLES.NOTE: IF YOUR VEHICLE IS PRESENTED TO AN AUTHORIZED DEALER ON AN AGREED SERVICEDATE AND THE REMEDY IS NOT PROVIDED WITHIN A REASONABLE TIME WITHOUT CHARGE ORTHE REMEDY DOES NOT CORRECT THE SAFETY-RELATED DEFECT OR NONCOMPLIANCE, PLEASECONTACT THE APPROPRIATE SERVICE CENTER ( BUICK AT 1-800-458-8006, PONTIAC AT1-800-763-2737; OLDSMOBILE AT 1-800-442-6537; OR CHEVROLET AT 1-800-222-1020 ).ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETYHOTLINE AT 1-800-424-9393.

Information provided by NHTSA
Data updated October 2019

1993 Averages

Avg. Car Cost : $12,750
Avg. Household Income : $31,230
Avg. Home : $113,200
Avg. Gallon of Gas : $1.16

© 1998-2020. All rights reserved. The material may not be published, broadcast, rewritten, or redistributed.


Vehicle information, history, and specifications from concept to production.

Follow ConceptCarz on Facebook Follow ConceptCarz on Twitter RSS News Feed

Conceptcarz.com
© 1998-2020 Conceptcarz.com Reproduction or reuse prohibited without written consent.