conceptcarz.com

1972 Porsche 911E Specifications

These are standard specifications for the 1972 Porsche 911E, not necessarily specifications for the vehicle(s) in the photo(s).
Engine Location : Rear
Drive Type : Rear Wheel
Body / Chassis : Steel Monocoque
Production Years for Series : 1972 - 1973
Price : $8,000-$8,700
Weight : 2340 lbs | 1061.406 kg
0-60 mph : 6.6 seconds.
1/4 Mile : 13.9 seconds.
Top Speed : 232 km/h | 144.188 mph
Flat 6
Displacement : 2195 cc | 133.9 cu in. | 2.2 L.
Power : 175 BHP (128.8 KW) @ 6200 RPM
Torque :160 Ft-Lbs (217 NM) @ 4500 RPM
Bore : 3.3 in | 84 mm.
Stroke : 2.8 in | 70 mm.
Compression : 9.0:1
Main Bearings : 4
Valvetrain : 12 SOHC (2 valves per cylinder)
Bosch electronic port fuel injection
Transmission:
5 Manual , Sportomatic

Total Porsche Production for 1972 : 20,464
1972 Porsche 911E

Coupe

Doors : 2
Exterior
Length : 163.3 in | 4148 mm.
Width : 63.5 in | 1613 mm.
Height : 52.0 in | 1321 mm.
Wheelbase : 89.3 in | 2268 mm.
Front Track : 53.7 in | 1364 mm.
Rear Track : 53.0 in | 1346 mm.
Ground Clearance : 5.9 in | 150 mm.

Targa

Price : $8,700
Weight : 2340 lbs | 1061.406 kg
Doors : 2
Exterior
Length : 163.3 in | 4148 mm.
Width : 63.5 in | 1613 mm.
Height : 52.0 in | 1321 mm.
Wheelbase : 89.3 in | 2268 mm.
Front Track : 53.7 in | 1364 mm.
Rear Track : 53.0 in | 1346 mm.
Ground Clearance : 5.9 in | 150 mm.

Suspension
Front : MacPherson struts with single lowe transverse A-arms and longitudinal torsion bars and antiroll bar

Rear : Independent with semi-trailing arms and transverse torsion bars, plus anti-roll bar

Steering
Rack and Pinion
Turns lock to lock : 3.10

Component

POWER TRAIN:CLUTCH ASSEMBLY:PEDAL/HAND LEVER(MOTORCYCLE)

Manufacturer

PORSCHE CARS N.A. INC.

NHTSA Campaign ID71V233000
NotesPORSCHE/AUDI CAMPAIGN NO 302 400 AL 00 (T&E MODELS ONLY).POS SIBILITY THATROD TO CLUTCH ACTUATING LEVER IS TOO SMALL IN DI AMETER AND ATTACHING PINS ARENOT PROPERLY SEATED.IF CONDITI ON EXISTS COULD UNDER EXTREME CIRCUMSTANCESRESULT IN BENDINGOR DISCONNECTING OF ROD.IMPAIRING CLUTCH MOVEMENTANDMAKINGGEAR SHIFTING IMPOSSIBLE.(CORRECT BY INSPECTING AND REPLACIN GWITH LARGER DIAMETER ROD.)

Information provided by NHTSA
Data updated January 2023
1972 Averages
Avg. Household Income : $11,800
Avg. Home : $27,550
Avg. Gallon of Gas : $0.55

Popular frequently asked questions include:

What are the dimension and mechanical specifications of the 1972 Porsche 911E?
How many 1972 Porsche 911E were produced?
How powerful was the 1972 Porsche 911E? Was the 1972 Porsche 911E popular? Was the 1972 Porsche 911E expensive? What was the fuel economy of the 1972 Porsche 911E?

Q: How fast is the 1972 Porsche 911E? A: The 1972 Porsche 911E has a top speed of 232 km/h.

Q: What is the wheelbase size of the 1972 Porsche 911E? A: The 1972 Porsche 911E has a wheelbase size of 89.30 inches.

Q: What is the length of the 1972 Porsche 911E? A: The 1972 Porsche 911E has a length of 163.30 inches.

Q: What is the width of the 1972 Porsche 911E? A: The 1972 Porsche 911E has a width of 63.50 inches.

Q: How much did the 1972 Porsche 911E cost when new?A: The 1972 Porsche 911E cost approximately $8,000 to $8,700 (USD) when new.

Q: What were the bodystyles of the 1972 Porsche 911E? A: The 1972 Porsche 911E was offered as a Coupe, Targa.

Q: How many vehicles did Porsche produce in 1972? A: Porsche produced 20,464 automobiles in 1972.

Q: What engine did the 1972 Porsche 911E have? A: The engine powering the 1972 Porsche 911E was a Flat 6 (2195 cc | 133.9 cu in. | 2.2 L.) with 175 BHP (128.8 KW) @ 6200 RPM and 160 Ft-Lbs (217 NM) @ 4500 RPM.

Q: What transmissions did the 1972 Porsche 911E have? A: The 1972 Porsche 911E had the following gearbox options: 5 speed Manual, Sportomatic.